AMONIDA S900 LCD Electric Bicycle Display Control Panel User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your AMONIDA S900 LCD Electric Bicycle Display Control Panel. Designed for 36V and 48V electric bicycles, this display serves as a comprehensive trip computer and control interface for your e-bike's electrical system. Please read this manual thoroughly before use to ensure proper function and safety.

Ṣeto

1. Ṣíṣe Ìfihàn náà

The S900 LCD Display Control Panel is designed for handlebars with a diameter of 22.2mm (0.9 inches). Ensure your handlebars meet this specification for secure mounting.

1. Position the display unit on your handlebar in a location that provides clear visibility and easy access to the remote control buttons.
2. Lo iṣagbesori ti pese clamps and screws to firmly attach the display to the handlebar. Do not overtighten, but ensure it is secure and does not rotate freely.
3. Attach the remote control unit to the handlebar next to the display, ensuring its cable can reach the display's connection port without strain.

Image: The AMONIDA S900 LCD Display Control Panel mounted on handlebars, emphasizing its suitability for 22.2mm diameter handlebars and its function in recording power consumption.

Image: Components of the AMONIDA S900 LCD Display Control Panel, including the display unit, remote control, and separate handlebar mounting rings.

2. Wiring Awọn isopọ

The S900 display features a 5-pin interface for connection to your e-bike's controller. Ensure all connections are secure and correctly aligned to prevent damage.

1. Locate the instrument interface on your e-bike's controller.
2. Connect the 5-pin connector from the S900 display to the corresponding port on the controller. The function can be realized by connecting the meter socket of the display screen to the instrument interface of the controller.
3. Ensure the connection is firm and waterproof.

Aworan: Ẹyin view of the AMONIDA S900 LCD Display Control Panel, highlighting the mounting clamps and the 5-pin interface cable.

Fidio Afihan Eto

Video: This video demonstrates the basic functionality and display features of the AMONIDA S900 LCD Control Panel, including power-on sequence and data presentation.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Paa

To power on the display, press and hold the power button on the remote control unit. To power off, press and hold the power button again.

2. Awọn iṣẹ ifihan

The S900 display provides a variety of useful data at a glance:

• Ifihan Iyara: Ó fi iyára ìwakọ̀ lọ́wọ́lọ́wọ́ hàn.
• Power Assisted Gear Display: Indicates the current level of pedal assist.
• Atọka Agbara: Han idiyele batiri to ku.
• Fault Prompt: Alerts you to system errors.
• Lapapọ Ijinna: Records the total distance traveled.
• Ibugbe Nikan: Records the distance for the current trip.
• Headlight Display: Indicates if the headlights are on.
• Single Driving Time Display: Shows the duration of the current trip.

Image: Close-up of the AMONIDA S900 LCD Display screen, showing battery level, speed, mode, and PAS indicators.

Image: Close-up of the AMONIDA S900 LCD Display screen, clearly showing the battery charge level, speed, mode, and PAS (Pedal Assist System) indicators.

3. Control and Setting Functions

The remote control unit allows you to manage various settings and functions:

• Power Switch Control: Turns the display and e-bike system on/off.
• Headlight Switch Control: Activates or deactivates the e-bike's headlights.
• 6Km/h Jog Control: Provides a low-speed assist function.
• Eto Iwọn Iwọn kẹkẹ: Adjusts for different wheel sizes for accurate speed and distance readings.
• Maximum Speed Setting: Configures the maximum assisted speed.
• Idle Automatic Sleep Time Setting: Sets the time before the display enters sleep mode.
• Backlight Brightness Setting: Adjusts the display's backlight intensity.
• Voltage Level Setting: Configures the display for 36V or 48V systems.
• PAS Connect: Manages the Pedal Assist System levels.

Aworan: Alaye view of the remote control unit for the AMONIDA S900 LCD Display, showing the up, down, and mode buttons.

Fidio Ifihan Isẹ

Video: This video showcases the AMONIDA S900 LCD Display, highlighting its waterproof design and various data readouts during operation.

Itoju

To ensure the longevity and optimal performance of your AMONIDA S900 LCD Display Control Panel, follow these maintenance guidelines:

• Ninu: Mu ese iboju ati ara pẹlu asọ, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic or screen.
• Ifihan omi: While the display has an IP07 rating (meaning it can withstand immersion in water up to 1 meter for 30 minutes), it is best to avoid prolonged exposure to heavy rain or direct water jets. Ensure all connections are dry before powering on.
• Ibi ipamọ: When not in use for extended periods, store the e-bike and display in a dry, cool place away from direct sunlight.
• Ayẹwo USB: Periodically check all cables and connectors for signs of wear, fraying, or damage. Replace any damaged components immediately.

Laasigbotitusita

If you encounter issues with your S900 LCD Display, refer to the following common problems and solutions:

• Ifihan Ko Tii:
  • Check if the battery is charged and properly connected to the e-bike system.
  • Ensure the 5-pin interface cable is securely connected to both the display and the controller.
  • Verify that the power button is being pressed and held correctly.
• Awọn kika Iyara / Mileage ti ko tọ:
  • Check the wheel diameter setting in the display's menu. Ensure it matches your e-bike's wheel size.
  • Inspect the speed sensor for proper alignment and any obstructions.
• PAS Not Functioning:
  • Verify that the PAS system is enabled and correctly configured in the display settings.
  • Check the PAS sensor for proper installation and any damage.
• Àfihàn Àwọn Kóòdù Àṣìṣe:
  • Refer to your e-bike controller's manual for specific error code interpretations.
  • Ti ọrọ naa ba wa, kan si atilẹyin alabara fun iranlọwọ.

Awọn pato

Atilẹyin ọja ati Support

Fun alaye atilẹyin ọja ati atilẹyin imọ-ẹrọ, jọwọ tọka si iwe ti o wa pẹlu rira rẹ tabi kan si olutaja taara. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.