RoadCam 720p Mirror Camera

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yada RoadCam 720p Mirror Camera. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its features. This device is designed to provide a clear view of the road and record driving events.

Kini To wa

Before proceeding with the installation, please verify that all components listed below are present in your package:

• RoadCam Mirror Camera
• Apo ngun
• 4GB MicroSD Kaadi
• 12V / 24V Power Adapter
• Ilana Afowoyi (iwe yii)

Figure 1: Included components of the Yada RoadCam 720p Mirror Camera. This image displays the mirror camera unit, a 12V/24V power adapter with a USB cable, and two rubber mounting straps.

Eto ati fifi sori

1. Gbigbe Kamẹra:

   The RoadCam is designed to clip over your existing rearview mirror. Use the included rubber straps from the mounting kit to secure the camera firmly to your vehicle's rearview mirror. Ensure the camera lens is unobstructed and facing forward, providing a clear view ti opopona wa niwaju.

   

   Figure 2: The RoadCam 720p Mirror Camera mounted in a vehicle, demonstrating its position over the existing rearview mirror and the integrated display.

2. Fi kaadi MicroSD sii:

   Locate the MicroSD card slot on the camera unit. Gently insert the provided 4GB MicroSD card into the slot until it clicks into place. Ensure the card is inserted with the correct orientation. This card will store all recorded video footage.

   

   olusin 3: Ẹyìn view of the RoadCam unit, highlighting the camera lens and the location of the MicroSD card slot on the back.

3. Agbara asopọ:

   Connect the 12V/24V power adapter to the camera's power input port. Plug the other end of the adapter into your vehicle's cigarette lighter socket. The camera will typically power on automatically when the vehicle's ignition is turned on.

Awọn ilana Iṣiṣẹ

The RoadCam features a 2.4" LCD screen and intuitive buttons for easy operation.

olusin 4: Iwaju view of the RoadCam 720p Mirror Camera, displaying the integrated 2.4" LCD screen and the control buttons located at the bottom edge.

Awọn iṣẹ bọtini:

• Bọtini agbara (⏻): Press and hold to turn the device on or off. A short press may toggle the display on/off during recording.
• Bọ́tìnì Àkójọ Àtòjọ (M): Access the settings menu. Press again to navigate through menu options.
• Awọn bọtini oke/isalẹ (▲ / ▼): Lọ kiri nipasẹ awọn aṣayan akojọ aṣayan tabi ṣatunṣe awọn eto.
• Bọtini O dara: Confirm selections in the menu or start/stop recording (if not in menu).

Awọn ẹya pataki:

• Gbigbasilẹ Loop:

  The camera continuously records video in short segments (e.g., 1, 3, or 5 minutes). When the MicroSD card is full, the oldest unlocked files are automatically overwritten by new recordings. This ensures continuous recording without manual deletion of old files.

• G-Sensor Technology:

  The built-in G-Sensor detects sudden impacts or rapid acceleration/deceleration. When such an event is detected, the current video segment is automatically locked and protected from being overwritten by loop recording. This preserves critical footage ni irú ti ijamba.

• Park & Record Mode:

  This mode allows the camera to monitor your vehicle even when parked. If the G-Sensor detects a collision or significant vibration while the vehicle is off, the camera will automatically power on and record a short video segment, then power off. This feature requires a continuous power supply to the camera (e.g., hardwiring kit, sold separately, or a continuously powered cigarette lighter socket).

• 2.4" LCD iboju:

  The integrated screen provides real-time viewing of the camera's feed, allowing for proper alignment during installation and instant playback of recorded videos. It also displays important information such as time, date, and recording status.

Itoju

• Ninu Kamẹra:

  Use a soft, dry cloth to clean the camera lens and the LCD screen. Avoid using abrasive cleaners or solvents, as they may damage the surfaces. Ensure the lens is clean for optimal video quality.

• Iṣakoso kaadi MicroSD:

  Periodically format the MicroSD card (e.g., once a month) using the camera's menu option to ensure optimal performance and prevent data corruption. Back up any important video files to a computer before formatting. Replace the MicroSD card if you experience frequent recording errors or data loss.

• Awọn imudojuiwọn famuwia:

  Ṣayẹwo awọn olupese ká website (Yada) for any available firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update carefully.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official Yada webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

Fun iranlọwọ siwaju sii, jọwọ ṣabẹwo: www.yada.com