EPEVER IP3000-22 Plus 3000W 24VDC to 230VAC Pure Sine Wave Inverter User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation of your EPEVER IP3000-22 Plus Pure Sine Wave Inverter. The IPower-Plus series is designed to convert 24V DC battery power to 230V AC pure sine wave power, making it ideal for off-grid home emergency lighting, vehicle-mounted systems, and other applications requiring stable AC power. It features an LCD display, USB output, and advanced protection functions.

2. Alaye Aabo

• Ka gbogbo awọn ilana ni pẹkipẹki ṣaaju fifi sori ẹrọ ati ṣiṣẹ.
• Rii daju pe fentilesonu to dara ni ayika ẹrọ oluyipada lati ṣe idiwọ igbona.
• Ma ṣe fi oluyipada si omi, ojo, tabi ọrinrin pupọ.
• Connect the inverter only to a 24V DC battery system. Incorrect voltage le fa ibajẹ.
• Always observe correct polarity when connecting battery cables (positive to positive, negative to negative).
• Yago fun kukuru-circuiting awọn ebute oko.
• Má ṣe gbìyànjú láti ṣí tàbí tún inverter náà ṣe fúnra rẹ. Tọ́ka sí àwọn òṣìṣẹ́ iṣẹ́ tó péye.
• Pa awọn ọmọde mọ kuro ninu inverter ati awọn asopọ rẹ.

3. Ọja Ipariview

The EPEVER IP3000-22 Plus Inverter is part of the IPower-Plus series, featuring a 180-degree rotatable LCD display for easy monitoring and compatibility with lithium batteries. It includes a USB port and surge current suppression on the input side (for 48V models without USB), protecting lithium battery cells and BMS from damage. The inverter is designed for low no-load or standby losses.

Figure 3.1: EPEVER IP3000-22 Plus Pure Sine Wave Inverter, main view.

olusin 3.2: Apa view of the inverter, highlighting the dual cooling fans for efficient heat dissipation.

Figure 3.3: Front panel of the inverter, featuring the DC input terminals for battery connection.

Figure 3.4: Rear panel of the inverter, showing the AC output socket, ON/OFF switch, RS-485 communication port, and USB output.

4. Eto

4.1 Ibẹrẹ Asopọ

1. Rí i dájú pé switi ON/OFF ti inverter wa ni ipo 'OFF'.
2. Connect the DC input cables to your 24V DC battery system. Ensure correct polarity: red cable to positive (+), black cable to negative (-). Secure connections tightly.
3. Connect your AC loads to the AC output socket on the inverter.
4. If using the RS485 communication interface for remote monitoring, connect the appropriate cable to the RS485 port.

4.2 Sisopọ Iṣakoso latọna jijin

The inverter supports remote control for convenient operation. Follow these steps to pair your remote control:

1. Remove the plastic separator from the remote control's battery compartment.
2. Press and hold the inverter's power button for three seconds until the red indicator light illuminates. Release the button.
3. Immediately press the 'ON' button on the remote control to complete the pairing process. If the red light flashes, pairing was unsuccessful; repeat the steps.

5. Awọn ilana Iṣiṣẹ

5.1 Titan / Pa a

• To power on the inverter, switch the ON/OFF button to the 'ON' position. The LCD display will illuminate, showing system status.
• To power off the inverter, switch the ON/OFF button to the 'OFF' position.
• Alternatively, use the paired remote control to switch the inverter ON or OFF.

5.2 Lilo LCD Ifihan

The LCD display provides real-time information about the inverter's operation, including battery voltage, iwọn didun ti o wujadetage, power consumption, and error codes. The display can be rotated 180 degrees for optimal viewing.

5.3 Ijade USB

The inverter features a 5VDC/Max.1A USB output, suitable for charging small electronic devices such as smartphones and tablets.

6. Itọju

• Regularly inspect all cable connections to ensure they are secure and free from corrosion.
• Keep the inverter's cooling vents clear of dust and debris to maintain proper airflow.
• Fi aṣọ gbígbẹ tí ó rọ, fọ ìta inverter náà. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi.
• Lorekore ṣayẹwo batiri voltage to ensure it remains within the recommended operating range.

7. Laasigbotitusita

The EPEVER IP3000-22 Plus Inverter is equipped with comprehensive protection features to ensure safe operation. If the inverter is not functioning as expected, check the following:

• Ko si Agbara Ijade: Check if the inverter is switched ON. Verify battery connections and ensure the battery voltage is within the operating range (24V DC system).
• Idaabobo Apọju: If the inverter shuts down due to an overload, reduce the connected load and restart the inverter. The continuous power is 3000W, with a surge power of 6000W (for 5 seconds).
• Idaabobo Circuit Kukuru: Disconnect all loads and check for any short circuits in the wiring or connected appliances.
• Apọjutage/Low Voltage Idaabobo: Rii daju pe batiri voltage is stable and within the specified range for a 24V system.
• Idaabobo Alapapo: Rí i dájú pé afẹ́fẹ́ tó péye wà ní àyíká inverter. Yọ gbogbo ìdènà kúrò lọ́wọ́ àwọn afẹ́fẹ́ itutu.
• Idaabobo Polarity yiyipada: Double-check battery connections for correct polarity.

If the issue persists after checking these points, contact customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

The EPEVER IP3000-22 Plus Inverter comes with a 2-year manufacturer's limited warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. The isolated RS485 communication interface allows for easy remote monitoring, management, and adjustment via PC software or a mobile phone application, providing additional support capabilities.