1. Ifihan ati Loriview
The DATOUBOSS 2000W Infrared Paint Curing Lamp is designed for efficient and rapid drying and curing of paint coatings, particularly in automotive body repair. This device utilizes shortwave infrared radiation, which penetrates the paint surface to heat from the inside out, significantly reducing curing times and improving work efficiency. The lamp features an adjustable timer and a high-reflectivity reflector for uniform heat distribution.
This manual provides essential information for the safe and effective use of your infrared paint curing lamp, including assembly, operation, maintenance, and troubleshooting.
2. Alaye Aabo
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Aabo Itanna: This unit operates at 110V. Ensure the power outlet is properly grounded and capable of handling a 2000W load. It is recommended to plug the lamp directly into a dedicated 120V outlet. If an extension cord is necessary, use a heavy-duty cord (10 gauge or better) to prevent overheating.
- Breaker Tripping: The unit may trip a circuit breaker upon initial startup, especially when cold, due to a high inrush current. This is sometimes normal for high-power heating devices. If it continues to trip after the first attempt, or if it trips during operation, discontinue use and inspect the electrical connection.
- Internal Shorting Risk: Some units may have an internal design flaw where screws in the ceramic connector block can contact the metal shield, creating an electrical short. If you suspect an electrical short (e.g., sparks, burning smell, repeated breaker trips), immediately unplug the unit and do not use it. Professional inspection and repair are required.
- Iwọn otutu giga: Awọn lamp generates intense heat. Do not touch the lamp head or bulbs during or immediately after operation. Allow sufficient time for cooling.
- Ewu ina: Pa awọn ohun elo ina, awọn olomi, ati awọn gaasi ti o le jona kuro ninu inaamp during operation. Ensure adequate ventilation in the work area.
- Idaabobo Oju: Avoid direct exposure to infrared radiation. Wear appropriate eye protection when operating the lamp.
- Afẹfẹ: Ensure the work area is well-ventilated to dissipate heat and fumes from curing paints.
- Iduroṣinṣin: Always ensure the stand is stable and on a level surface to prevent tipping.
- Awọn ọmọde ati awọn ohun ọsin: Pa awọn ọmọde ati awọn ẹranko mọ kuro ninu iṣẹ abẹamp.
3. Ọja irinše
Jẹrisi pe gbogbo awọn paati wa ninu package:
- Yíyan Lamp (SC-003)
- Telescopic Support / Stand
- Ojoro Eso
- Nsopọ Plate
- Awo ti o wa titi
- Mu
- Hexagon Wrench
- Ilana Afowoyi (iwe yii)
Figure 3.1: Included Product Accessories
4. Eto ati Apejọ Awọn ilana
Follow these steps to assemble your DATOUBOSS Infrared Paint Curing Lamp:
- Fi sori ẹrọ ipilẹ: Manually remove the nut from the telescopic support. Adjust the bolt to the middle position, align it with the two holes on the base, and insert it. Then, tighten the nut securely.
- Fi sori ẹrọ Asopọmọra: Align the internal thread through the holes on the connecting plate with the holes on both sides of the mounting plate on the lamp head. Tighten the nuts to ensure the connecting plate is perpendicular to the mounting plate.
- So akọmọ naa pọ: Yọ nut tí ń yípo tí ó wà lórí àtìlẹ́yìn telescopic náà. Tọ́ ihò náà sí àárín àwo tí ó sopọ̀ mọ́ (tí a so mọ́ l náà)amp head) with the top of the telescopic support, and then tighten the nut.
- Ṣatunṣe Giga naa: Utilize the two rotating devices on the telescopic support to freely expand or contract the stand, adjusting the lamp to the desired height. Ensure all locking mechanisms are tightened after adjustment.
Àwòrán 4.1: Àwọn Ìgbésẹ̀ Àkójọpọ̀
olusin 4.2: Giga Atunse Ibiti
Figure 4.3: Adjustable Working Angle
5. Awọn ilana Iṣiṣẹ
Ìtọ́jú Àwọ̀ Infrared DATOUBOSS Lamp offers flexible operation and precise control for various curing tasks.
5.1. Positioning and Angle Adjustment
- Gbe ipo lamp on a stable, level surface near the area to be cured.
- Ṣatunṣe giga ti lamp using the telescopic support to ensure optimal distance from the painted surface.
- Awọn lamp head can be manually adjusted up to 270 degrees to direct heat precisely where needed. Loosen the adjustment knob, set the desired angle, and then tighten the knob to secure it.
- Awọn lamp can be used in a stationary stand configuration or as a handheld unit for targeted applications.
Figure 5.1: Configurable Lifting Bracket in Use
Figure 5.2: Handheld and Stand Operation
5.2. Iṣẹ Aago
- The integrated timer allows you to set the curing duration from 0 to 90 minutes.
- Turn the timer knob to the desired curing time. The lamp will automatically shut off once the set time has elapsed.
- Setting the correct drying time is crucial for achieving optimal paint surface effects without issues like air bubbles.
Figure 5.3: 0-90 Minute Timer
5.3. Curing Process and Applications
The shortwave infrared technology ensures fast and powerful penetration, heating paint layers from the inside out. This method is effective for various paint types and applications.
- Curing Area: Awọn lamp provides a curing area of approximately 650 x 500 mm (25.6 x 19.7 inches).
- Iwọn Iṣiṣẹ: The working temperature can reach 0-200 ℃ (0-392 ℉).
- Typical Drying Times:
- Àkọ́kọ́ tí kò lè bàjẹ́: Ìṣẹ́jú 8-10
- Putty Àkọ́kọ́: Ìṣẹ́jú 10-14
- Àkọ́kọ́ Midway: Ìṣẹ́jú 11-15
- Àwọ̀ ìbora: ìṣẹ́jú 13-19
- Àwọ̀ ìpara: ìṣẹ́jú 12-19
- Awọn ohun elo: Widely used in auto spray paint rooms, for local paint drying, drying putty, car spray cooking booths, on-site repairs, engine drying, removing adhesive strips, drying filler, primer desiccant, or preheating before spraying.
Figure 5.4: Shortwave Infrared Penetration and Drying Times
Figure 5.5: Penetration Contrast of Infrared Waves
Figure 5.6: Drying Time Comparison (Traditional vs. Shortwave)
Figure 5.7: Wide Range of Applications
6. Itọju
Proper maintenance ensures the longevity and optimal performance of your paint curing lamp.
- Ninu: Rii daju pe lamp is unplugged and completely cool before cleaning. Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Rirọpo Boolubu: The infrared bulbs can be quickly disassembled and replaced when necessary. Refer to the product specifications for compatible bulb types. Always ensure the unit is unplugged and cool before attempting bulb replacement.
- Pipade Ooru: Awọn lamp is constructed with an aluminum alloy body and a perforated back panel to enhance heat dissipation. Ensure that the ventilation holes are not obstructed during operation to maintain effective cooling and extend service life.
- Ibi ipamọ: Tọju awọn lamp in a dry, clean environment when not in use.
7. Laasigbotitusita
Apá yìí ń ṣàlàyé àwọn ìṣòro tó wọ́pọ̀ tí o lè bá pàdé pẹ̀lú ìtọ́jú awọ infurarẹẹdi rẹamp.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Lamp ko tan | No power supply; Timer not set; Damaged bulb; Internal wiring issue. | Check power connection and outlet. Set the timer. Inspect bulbs for damage and replace if necessary. If still not working, contact support. |
| Circuit breaker trips upon startup or during operation | High inrush current (normal for cold start); Overloaded circuit; Electrical short within the unit; Faulty wiring/extension cord. | If it trips once on cold start, try again. Ensure the lamp is on a dedicated 20A circuit. Use a 10-gauge or better extension cord if needed. If repeated, discontinue use and seek professional inspection for internal shorting. |
| Power cord overheats | Inadequate extension cord; Loose connection; Overloaded circuit. | Plug directly into a 120V outlet. If an extension cord is necessary, use a heavy-duty (10 gauge or better) cord. Ensure connections are secure. |
| Uneven curing or slow drying | Incorrect distance from surface; Improper angle; Damaged reflector; Incorrect timer setting. | Ṣe atunṣe lamp distance and angle for uniform coverage. Check reflector for damage. Verify timer settings are appropriate for the paint type. |
| Isusu flicker tabi baibai | Loose bulb connection; Nearing end of bulb life; Voltage awọn iyipada. | Ensure bulbs are securely seated. Replace bulbs if they are old. Check power supply for stable voltage. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | ZJ-SC-003-Y |
| Agbara | 2000W |
| Voltage | 110V 60Hz |
| Agbègbè Ìtọ́jú | 650 x 500 mm (25.6 x 19.7 inches) |
| Awọn iwọn otutu ti nṣiṣẹ | 0 - 200 ℃ (0 - 392 ℉) |
| Iwọn Ọja (L)amp Ori) | 620 x 340 x 190 mm (24.4 x 13.3 x 7.4 inches) |
| Apapọ iwuwo | 5.01 kg (11.04 lbs) |
| Ohun elo | Aluminiomu Alloy |
| Ibiti Aago | 0 - 90 iṣẹju |
| Adijositabulu Igun | 270 iwọn |
9. atilẹyin ọja Information
Specific warranty details for the DATOUBOSS 2000W Infrared Paint Curing Lamp may vary depending on your region and point of purchase. Please refer to the warranty documentation included with your product or contact the retailer from whom you purchased the item for detailed information regarding warranty coverage, terms, and conditions.
10. Atilẹyin ati Alaye olubasọrọ
For technical assistance, product inquiries, or to report any issues, please contact DATOUBOSS customer support through the retailer or platform where you purchased this product. Have your model number (ZJ-SC-003-Y) and purchase details ready when contacting support.