Ọrọ Iṣaaju
This user manual provides essential information for the installation, operation, and maintenance of your 3 in 1 Reversing Camera with Backup Radar Detector and Parking Sensor. This device is designed to enhance parking safety by providing a reversing image and obstacle distance display. It is compatible with most car models, including SUVs, pickups, trucks, and mini cars.
Ọja Awọn ẹya ara ẹrọ
- Parking Assistant: Integrates a rear camera with radar and parking sensors for comprehensive parking assistance.
- Ifihan Lẹ́ẹ̀kan náà: Reversing video and obstacle distance data are displayed simultaneously on a compatible monitor (monitor not included).
- Ibamu Agbaye: Suitable for a wide range of vehicles.
- Low Illumination Camera: Provides good night vision performance for parking in dark conditions.
- Ikole ti o tọ: Made of high-quality ABS plastic, ensuring long durability, shockproof, waterproof, and weather-resistant properties.
- Fidio ti o ni ipinnu giga: Supports 720p video capture resolution.
- Lẹnsi Igun Gigun: Equipped with a wide-angle lens for broader view.
Ọja Pariview
Nọmba 1: Iwaju view of the 3 in 1 reversing camera unit. It features a central camera lens flanked by two ultrasonic radar sensors. Two small LED lights are visible above the camera lens, likely for illumination. The unit is black with a sleek, rectangular design, and a cable extends from its base.
Nọmba 2: Technical diagram illustrating the dimensions and key components of the 3 in 1 reversing camera. The diagram shows the unit's length as 60mm, width as 30mm, and height as 20mm. It clearly labels the central camera as "LENS" and the two side components as "SENSOR", indicating their function as ultrasonic parking sensors.
Package Awọn akoonu
Ni igbagbogbo package naa pẹlu:
- 3 in 1 Reversing Camera Unit (Camera, Radar Detector, Parking Sensor)
- Okun agbara
- Kaadi fidio
- Ohun elo iṣagbesori (skru, biraketi)
- Itọsọna olumulo
Note: Specific contents may vary. Please check the product packaging for a complete list.
Alaye Aabo
- Always ensure the vehicle's engine is off and the parking brake is engaged before beginning installation.
- Disconnect the vehicle's battery before working on electrical systems to prevent short circuits or electrical shock.
- Consult a professional if you are unsure about any installation steps, especially wiring.
- Ensure all connections are secure and properly insulated to prevent water damage or electrical issues.
- This device is an aid for parking and should not replace careful driving and direct observation.
Eto ati fifi sori
Installation typically involves mounting the camera unit at the rear of the vehicle and connecting it to the vehicle's power supply (e.g., reverse light circuit) and a compatible display monitor.
- Yan Ibi Igbesoke: Select a central location at the rear of your vehicle, typically above the license plate, that provides a clear view and allows for secure mounting.
- Ṣe aabo Ẹka naa: Use the provided mounting hardware to securely attach the camera unit to the chosen location. Ensure it is stable and does not obstruct any vehicle functions.
- Wiring Power: Connect the power cable of the camera unit to the vehicle's reverse light circuit. This ensures the camera activates automatically when the vehicle is put into reverse. Ensure proper polarity.
- Wiring Video: Connect the video output cable from the camera unit to the video input of your compatible display monitor.
- Iṣe idanwo: After installation, re-connect the vehicle's battery. Put the vehicle into reverse (with the engine off and parking brake engaged for safety) to test if the camera and sensors are functioning correctly and displaying on the monitor.
- Iṣakoso USB: Route all cables neatly and securely, away from moving parts or heat sources, to prevent damage and ensure a clean installation.
For detailed wiring diagrams and vehicle-specific instructions, please refer to your vehicle's service manual or consult a qualified automotive technician.
Awọn ilana Iṣiṣẹ
Once properly installed, the 3 in 1 Reversing Camera operates automatically:
- When the vehicle is shifted into reverse gear, the camera will automatically power on and transmit video to the connected display monitor.
- Simultaneously, the integrated radar sensors will activate. As the vehicle approaches an obstacle, the system will provide audible alerts (chirps) and visual distance indicators on the monitor.
- The audible alerts typically increase in frequency as the vehicle gets closer to an obstacle.
- The display will show the live video feed from the rear of the vehicle, along with graphical overlays indicating obstacle proximity and direction.
Always use mirrors and direct observation in conjunction with the camera system for safe reversing.
Itoju
- Ninu: Regularly clean the camera lens and sensor surfaces with a soft, damp cloth to ensure clear vision and accurate sensor readings. Avoid abrasive cleaners.
- Ayewo: Periodically check all wiring connections for signs of wear, corrosion, or looseness. Ensure the unit remains securely mounted.
- Awọn Okunfa Ayika: While the unit is weather-resistant, extreme temperatures or prolonged exposure to harsh elements may affect performance.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Kò sí àwòrán lórí àtẹ ìṣàfihàn nígbà tí ó bá wà ní ìyípadà. | No power to camera; loose video connection; faulty camera/monitor. | Check power wiring to reverse light circuit. Ensure video cable is securely connected. Test with another monitor if possible. |
| Sensors not detecting obstacles or inaccurate readings. | Sensors are dirty or obstructed; faulty sensor. | Clean sensor surfaces. Ensure no debris is blocking the sensors. |
| Àwòrán náà kò ní ìrísí tàbí ó ti yípadà. | Dirty lens; damaged lens; poor video signal. | Clean the camera lens. Check video cable for damage. |
| Audible alarm not working. | Speaker disconnected or faulty. | Check speaker connection. |
Ti awọn iṣoro ba tẹsiwaju lẹhin igbiyanju awọn ojutu wọnyi, jọwọ kan si atilẹyin alabara.
Awọn pato
- Awoṣe: 3 NÍ 1
- Ìwọ̀n Nkan: 1.06 iwon
- Awọn iwọn idii: 5.67 x 4.25 x 2.13 inches
- Ilu isenbale: China
- Screen Size (Compatible Monitor): 3 Inches (as per product spec, though monitor not included)
- Awọn ẹrọ ibaramu: Atẹle
- Display Technology (Compatible Monitor): LCD
- Iru fifi sori ẹrọ: Oke Oke
- Ipinnu Yiya fidio: 720p
- Voltage: 12 Volts
- Imọ-ẹrọ Sensọ Opitika: CMOS
- Irú lẹnsi: Igun gbooro
- Real Igun ti View: Awọn iwọn 60
Atilẹyin ọja ati Support
Ọja yi wa pẹlu kan 1-odun atilẹyin ọja lati ọjọ ti o ra.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact information.
Awọn fidio ọja osise
Ko si awọn fidio ọja osise lati ọdọ olutaja wa fun nkan yii ni akoko yii.