Alaye Aabo pataki
Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.
- Agbara iwuwo: Do not exceed the maximum weight capacity specified for your model. Overloading can result in serious injury or property damage.
- Ilana Odi: The wall mount must be securely attached to a suitable wall structure. Do not install on drywall alone. Ensure the mounting surface can safely support the combined weight of the mount and the television.
- Ibamu VESA: Verify your TV's VESA mounting pattern (hole spacing) is compatible with this mount.
- Awọn ọmọde: Keep children away from the installation area. Small parts may be a choking hazard.
- Awọn irinṣẹ: Lo awọn irinṣẹ ti o yẹ fun fifi sori ẹrọ.
Ibamu ọja
This instruction manual covers two models of PERLESMITH Full Motion TV Wall Mounts, PSMFK7 and PSMFK1. Please identify your model and confirm your television's specifications before proceeding with installation.
Model PSMFK7
- Ibamu Iwọn iboju: Most 26-55 inch TVs.
- Agbara iwuwo: Titi di 70 lbs (31.7 kg).
- Àwọn Àpẹẹrẹ VESA: 100x100mm to 400x400mm.
Figure 1: PSMFK7 Model Compatibility Overview. This image illustrates the supported screen sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (100x100mm to 400x400mm) for the PSMFK7 TV wall mount.
Model PSMFK1
- Ibamu Iwọn iboju: Most 26-60 inch TVs.
- Agbara iwuwo: Titi di 77 lbs (35 kg).
- Àwọn Àpẹẹrẹ VESA: Up to 400x400mm (16x16 inches).
Figure 2: PSMFK1 Model Compatibility and Wall Types. This image details the wide compatibility of the PSMFK1 model, supporting TVs up to 60 inches and various VESA patterns. It also indicates suitability for single wood stud, brick, and concrete walls.
Confirm Before Purchase
Ṣaaju riraasing or installing, ensure your TV meets the following criteria:
- Iwọn TV: Your TV's weight is within the mount's capacity (70 lbs for PSMFK7, 77 lbs for PSMFK1).
- Iwon TV: Your TV's screen size is within the recommended range (26-55" for PSMFK7, 26-60" for PSMFK1).
- Ilana VESA: Your TV's VESA mounting holes match one of the supported patterns.
- Odi Iru: Your wall is suitable for installation (single wood stud, concrete, or brick).
- Cable Blockage: Ensure the mounting holes on your TV do not block any cables or inputs.
Figure 3: Pre-Purchase Confirmation Checklist. This image provides a visual summary of essential checks to perform before installing the TV mount, including TV weight, size, VESA, wall type, and potential cable interference.
Kini To wa
Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.
Figure 4: Package Contents. This image displays the main components of the PERLESMITH full motion TV wall mount kit, including the mount assembly, a bubble level for installation, and cable ties for cable management.
Typical Package Contents:
- Full Motion TV Wall Mount Assembly
- Àwọn Báàkẹ́ẹ̀tì Tẹlifíṣọ̀n (x2)
- Ohun elo Ohun elo Iṣagbesori (oriṣiriṣi awọn skru, awọn fifọ, awọn alafo, awọn ìdákọró)
- Ipele Bubble
- Awọn isopọ USB (x3)
- Ilana itọnisọna
Eto ati fifi sori
Proper installation is crucial for the safety and stability of your TV. Follow these steps carefully.
Ṣaaju ki O to Bẹrẹ
- Gather all necessary tools (e.g., drill, stud finder, level, screwdriver, tape measure).
- Ensure you have a clear, safe workspace.
- Confirm your TV and wall meet the compatibility requirements.
Wall Type Considerations
This mount is designed for installation on:
- Single Wood Stud: Locate the center of the wood stud using a stud finder.
- Solid Concrete Wall: Requires a masonry drill bit and concrete anchors.
- Odi biriki: Requires a masonry drill bit and brick anchors.
IKILO: Do not install this TV mount on drywall alone. Drywall cannot support the weight of the mount and TV.
Gbogbogbo fifi sori Igbesẹ
- So awọn akọmọ TV mọ TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
- Determine Wall Plate Position: Hold the wall plate against the wall at your desired viewing height. Use the included bubble level to ensure it is perfectly horizontal. Mark the drilling locations.
- Awọn Iho Pilot Lilu: Drill pilot holes at the marked locations. For wood studs, drill directly. For concrete or brick, use a masonry bit and insert concrete/brick anchors.
- Awo Odi to ni aabo: Attach the wall plate to the wall using the lag bolts and washers. Tighten securely, but do not overtighten.
- So TV sori Awo Odi: Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated.
- TV ti o ni aabo lati gbe sori ẹrọ: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5: Centering Your TV. This image demonstrates a TV mounted centrally on a wall, providing a visual guide for optimal placement above a feature like a fireplace.
Figure 6: Corner Mounting Example. This image illustrates how the full motion design allows for effective TV placement in a room corner, maximizing viewing awọn igun.
Awọn atunṣe Ṣiṣẹ
The full motion design allows for flexible viewing angles. Adjustments can be made after installation.
- Tẹ: The TV can be tilted +5° upwards to -15° downwards to reduce glare or optimize viewing from different heights. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and re-tighten.
- Swivel: The articulating arm allows the TV to swivel up to +/-90° (180° total range) left or right, depending on TV size and wall distance. Gently push or pull the TV to the desired angle.
- Itẹsiwaju/Ipadasẹyin: The mount can extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile wo.
- Ìpele: After installation, the TV can be leveled +/-3° to correct any minor misalignments. Loosen the leveling screws, adjust, and re-tighten.
Figure 7: Full Motion Adjustments. This image visually explains the tilt, extension, swivel, and leveling features of the TV mount, demonstrating the range of motion available for optimal viewing.
Itoju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke ogiri TV rẹ.
- Ninu: Mu ese kuro pẹlu asọ ti o tutu, ti o gbẹ lati yọ eruku kuro. Yago fun abrasive ose tabi epo.
- Ṣayẹwo Awọn isopọ: Lokọọkan ṣayẹwo gbogbo awọn skru ati awọn asopọ lati rii daju pe wọn wa ni wiwọ ati aabo. Tun-mu ti o ba wulo.
- Ṣayẹwo fun ibajẹ: Regularly inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, discontinue use and contact customer support.
Laasigbotitusita
Ti o ba pade awọn ọran lakoko tabi lẹhin fifi sori ẹrọ, tọka si awọn iṣoro ti o wọpọ ati awọn solusan atẹle.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| TV kii ṣe ipele lẹhin fifi sori ẹrọ. | Àìṣedéédé díẹ̀ nígbà tí a bá ń fi sori ẹrọ. | Use the +/-3° leveling adjustment feature. Loosen leveling screws, adjust, and re-tighten. |
| Mount náà dà bí ẹni pé ó rọ̀ tàbí kò dúró ṣinṣin. | Screws not fully tightened; incorrect wall anchors used; wall structure insufficient. | Ensure all mounting screws are securely tightened. Verify correct anchors for your wall type. If the wall is insufficient, consult a professional. |
| Iṣoro lati ṣatunṣe titẹ tabi yiyi. | Adjustment knobs/bolts are too tight. | Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten to hold the position. |
| TV ko yẹ sori pẹpẹ naa. | Incorrect TV size, weight, or VESA pattern for the mount model. | Verify your TV's specifications against the mount's compatibility (refer to Product Compatibility section). |
Awọn pato ọja
| Ẹya ara ẹrọ | PSMFK7 Model | PSMFK1 Model |
|---|---|---|
| Iṣagbesori Iru | Ògiri Ògiri | |
| Iṣipopada Iru | Articulating, Swivel, Tilt | |
| Ibamu iboju Awọn iwọn | 26 - 55 inches | 26 - 60 inches |
| O pọju iwuwo Agbara | 70 lbs (31.7 kg) | 77 lbs (35 kg) |
| VESA ibamu | 100x100mm to 400x400mm | Titi di 400x400mm |
| Titẹ Igun | +5° / -15° | |
| Igun Swivel | +/-90° (up to 180° total, depending on TV size) | |
| Atunse Ipele | +/-3° | |
| Itẹsiwaju lati Wall | 3.2 inches (ti a fà sẹ́yìn) sí 19.17 inches (tí a fẹ̀ sí i) | |
| Ohun elo | Alloy Irin | |
| Ibamu Wall Orisi | Single Wood Stud, Solid Concrete, Brick Wall | |
Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the product packaging or contact PERLESMITH customer service directly. Keep your purchase receipt for warranty claims.
If you have any questions or require assistance with installation or operation, please do not hesitate to reach out to our support team.