DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad User Manual

Ọrọ Iṣaaju

This manual provides essential information for the installation, operation, and maintenance of the DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad. This keypad is designed to work seamlessly with DSC PowerSeries NEO control panels, including models HS2016, HS2032, HS2064, and HS2128.

The image displays the DSC HS2LCD N keypad, a white, rectangular device with a prominent blue LCD screen. The screen shows the text 'System is Ready to Arm'. The DSC logo is visible on the lower left of the keypad.

Fifi sori ẹrọ ati Eto

The DSC HS2LCD N keypad is a hardwired device requiring professional installation.

Atokọ fifi sori ẹrọ tẹlẹ

• Ensure the control panel is powered off before connecting the keypad.
• Verify compatibility with your PowerSeries NEO control panel (HS2016, HS2032, HS2064, HS2128).
• Have necessary tools: screwdriver, wire strippers, mounting hardware.

Awọn Itọsọna Waya

Connect the keypad to the control panel's Keybus terminals (Red, Black, Yellow, Green) following the wiring diagram provided with your control panel. Ensure correct polarity.

Iṣagbesori

Mount the keypad securely on a flat surface using the provided mounting screws. Ensure it is placed in a location easily accessible for daily use.

Awọn ilana Iṣiṣẹ

The HS2LCD N keypad provides a full message LCD display for clear system status and intuitive operation.

Arming awọn System

• Duro ihamọra: Tẹ mọlẹ Duro button or enter your user code followed by *9.
• Lilọ kuro ni ihamọra: Enter your user code. The system will arm after the exit delay.
• Ko si-Titẹsi Arming: Tẹ mọlẹ No-Entry button or enter your user code followed by *1.

Disarming awọn System

Enter your user code when the system is armed or in alarm.

ViewIpò System

The LCD will display messages such as "System is Ready to Arm", "System Armed", or "Alarm". Use the arrow keys (< >) to scroll through event buffers or system messages.

Wiwọle Awọn iṣẹ

Refer to your main control panel manual for specific function codes and programming options accessible via the keypad. Common functions include:

• Bypass Zones: *1 followed by zone number(s).
• Ifihan wahala: *2.
• Memory of Alarms: *3.
• Aago ati Ọjọ Eto: *6 followed by master code.

Itọju ati Itọju

• Ninu: Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Idanwo deede: Periodically test your alarm system, including the keypad, in conjunction with your alarm monitoring company.
• Ibi ti ina elekitiriki ti nwa: Ensure a stable power supply to the control panel to prevent keypad malfunctions.

Laasigbotitusita

This section addresses common issues you might encounter with your DSC HS2LCD N keypad.

Bọtini foonu Ko Dahun

• Ṣayẹwo Agbara: Ensure the control panel has power.
• Asopọmọra: Verify all Keybus connections are secure and correctly wired (Red, Black, Yellow, Green).
• Control Panel Status: Check the main control panel for error indicators.

"Trouble" Light On

• Tẹ *2 on the keypad to view the specific trouble condition (e.g., AC failure, battery trouble, zone fault).
• Consult your control panel manual for detailed explanations of trouble codes.

Àkókò/Ọjọ́ tí kò tọ́ Ìfihàn

• Lo awọn *6 master code command to set the correct time and date.

Keypad Beeping

• A continuous beep usually indicates a trouble condition. Press *2 to identify the issue.
• A short beep confirms key presses.

Imọ ni pato

Atilẹyin ọja ati Onibara Support

Ọja yii wa pẹlu atilẹyin ọja 12-osu lati ọjọ rira.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized DSC dealer or the product manufacturer.

For more information, visit the official DSC website or consult your installer.