1. Ifihan
Thank you for choosing the HI-FOCUS HF-PSF108 8 Channel CCTV Power Supply. This device is designed to provide stable and reliable power to up to eight CCTV cameras, ensuring optimal performance for your surveillance system. This manual provides essential information for the safe installation, operation, and maintenance of your power supply unit.
2. Alaye Aabo
- Aabo Itanna: Always ensure the power supply is disconnected from the main power source before performing any installation, maintenance, or troubleshooting.
- Afẹfẹ: Ma ṣe dina awọn ṣiṣi atẹgun. Rii daju pe sisan afẹfẹ to peye ni ayika ẹyọ lati ṣe idiwọ igbona.
- Ayika: Install the unit in a dry, well-ventilated area, away from direct sunlight, high temperatures, humidity, and corrosive substances.
- Fifi sori Ọjọgbọn: Installation should be performed by qualified personnel to ensure compliance with local electrical codes and safety standards.
- Voltage ibamu: Daju pe awọn input voltage range of the power supply matches your local power grid specifications.
3. Package Awọn akoonu
Please check the package contents upon unboxing. If any items are missing or damaged, contact your supplier immediately.
- HI-FOCUS HF-PSF108 8 Channel CCTV Power Supply Unit
- Afowoyi Olumulo (iwe-ipamọ yii)
Figure 3.1: HI-FOCUS HF-PSF108 Power Supply Unit Packaging. The image displays the retail box for the HI-FOCUS CCTV SMPS, highlighting features such as surge protection, overload and short circuit protection, cable compensation switch, resettable fuse per channel, and individual power LED indicators.
4. Ọja Ipariview
The HI-FOCUS HF-PSF108 is a Switching Mode Power Supply (SMPS) designed for CCTV applications. It features multiple output channels, each with individual protection and indicators.
Figure 4.1: HI-FOCUS HF-PSF108 Power Supply Front View. This image shows the top panel of the power supply unit, displaying the model number (HF-PSF108), input voltage range (90-285V DC, 50-60Hz), output specifications (DC 12V-1A per channel), a voltage adjustment switch with 'Ex. Long', 'Long', and 'Normal' settings, and eight pairs of output terminals.
4.1 Awọn paati bọtini
- Awọn ebute Input: For connecting the main AC power source (90-285V AC, 50-60Hz).
- Awọn ebute Ipajade: Eight pairs of terminals for connecting up to eight CCTV cameras (12V DC, 1A per channel).
- Voltage Adjustment Switch: Allows selection of output voltage compensation for different cable lengths ('Normal', 'Long', 'Ex. Long').
- Afẹfẹ Grille: Ensures proper heat dissipation.
- Individual Power LED Indicators: Each output channel may have an LED to indicate power status.
- Resettable Fuses: Each channel is protected by a resettable fuse against overload and short circuits.
5. Eto ati fifi sori
Follow these steps for proper installation of your HI-FOCUS HF-PSF108 power supply.
5.1 Iṣagbesori Unit
- Choose a secure, dry, and well-ventilated location for mounting.
- Ensure there is sufficient space around the unit for heat dissipation and cable management.
- Mount the unit using appropriate screws and anchors suitable for the mounting surface.
5.2 Connecting Power Input
- IKILO: Ensure the main power source is OFF before connecting.
- Connect the AC power cable to the input terminals of the power supply. Refer to the unit's labeling for correct polarity (Live, Neutral, Ground).
- Ensure all connections are secure to prevent loose contacts and potential hazards.
5.3 Connecting CCTV Cameras
- Connect each CCTV camera's power input cable to one of the 8 output terminal pairs on the power supply.
- Observe correct polarity: connect the positive (+) wire of the camera to the positive (+) terminal of the power supply, and the negative (-) wire to the negative (-) terminal.
- Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
Ọdun 5.4 Voltage Atunṣe Yipada
The unit features a voltage adjustment switch to compensate for voltage drop over long cable runs. Select the appropriate setting based on your cable length:
- Deede: For standard cable lengths.
- Gigun: For moderately long cable runs.
- Ex. Long: For very long cable runs to ensure cameras receive sufficient voltage.
Adjust this switch ṣaaju ki o to powering on the unit. Incorrect settings may lead to camera malfunction or reduced lifespan.
6. Awọn ilana Iṣiṣẹ
After completing the installation and verifying all connections:
- Tan ipese agbara akọkọ si ẹrọ naa.
- Observe the individual power LED indicators (if present) for each channel. A lit LED indicates that the channel is receiving power.
- Verify that all connected CCTV cameras are receiving power and operating correctly.
7. Itọju
Regular maintenance helps ensure the longevity and reliable operation of your power supply unit.
- Ninu: Lokọọkan nu ode ti ẹyọ naa pẹlu asọ ti o gbẹ. Ma ṣe lo awọn olutọpa olomi tabi awọn olomi. Rii daju pe awọn grille fentilesonu ko ni eruku ati idoti.
- Ṣayẹwo Asopọmọra: Periodically inspect all power input and output connections to ensure they remain secure.
- Ṣayẹwo Ayika: Ensure the operating environment remains within the recommended conditions (temperature, humidity).
- Fuse Reset: If a channel stops providing power, check the corresponding resettable fuse. Disconnect the camera from that channel, wait a few moments for the fuse to reset, then reconnect the camera. If the issue persists, troubleshoot the camera or cable.
8. Laasigbotitusita
If you encounter issues with your HI-FOCUS HF-PSF108 power supply, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No power to cameras | Main power disconnected Faulty input cable Aṣiṣe inu | Check main power switch and connections Rọpo okùn ìtẹ̀wọlé Olubasọrọ imọ support |
| One camera not receiving power | Asopọ alaimuṣinṣin Tripped resettable fuse Faulty camera/cable | Check camera power connection Disconnect camera, wait for fuse reset, reconnect Test camera/cable with another power source |
| Cameras flickering or unstable video | Voltage tolesese Excessive cable length Overloaded channel | Satunṣe voltage switch to 'Long' or 'Ex. Long' Reduce cable length or use thicker gauge cable Ensure camera current draw is within 1A per channel |
| Unit overheating | Afẹfẹ ti ko dara Apọju | Rii daju pe sisan afẹfẹ to peye ni ayika ẹyọ naa Reduce the load on the power supply |
9. Awọn pato
The following are the technical specifications for the HI-FOCUS HF-PSF108 8 Channel CCTV Power Supply:
Figure 9.1: HI-FOCUS HF-PSF108 Technical Specifications. This image displays the technical specifications printed on the product packaging, detailing input voltage, frequency, current, output voltage, current, efficiency, line and load regulation, dimensions, pin type, and weight for both HF-PSF104 and HF-PSF108 models.
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Orukọ awoṣe | HF-PSF108 |
| Brand | HI-FOCUS |
| Iṣagbewọle Voltage | AC 90-285V |
| Igbohunsafẹfẹ Input | 50-60Hz |
| O wujade Voltage | DC 12V |
| Ijade lọwọlọwọ | 1A per channel (Max) |
| Nọmba ti awọn ikanni | 8 |
| Awọn ẹrọ ibaramu | Kamẹra |
| Asopọmọra Iru | Molex (for cable connections) |
| Ọna Itutu | Afẹfẹ |
| Idaabobo Awọn ẹya ara ẹrọ | Surge protection, Overload & short circuit protection, Resettable fuse for each channel |
| Awọn iwọn (L x W x H) | 127mm x 140mm x 36mm (isunmọ.) |
| Iwọn | 296 giramu (isunmọ.) |
10. Atilẹyin ọja ati Support
HI-FOCUS products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or contact your local HI-FOCUS distributor or reseller. For technical support, assistance with installation, or troubleshooting, please reach out to HI-FOCUS customer service through their official channels.