Alaye Aabo pataki
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation, maintenance, or bulb replacement.
- Fifi sori yẹ ki o ṣe nipasẹ oṣiṣẹ ina mọnamọna ti o ko ba ni idaniloju nipa wiwọ itanna.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Maṣe kọja wat ti o pọjutage pàtó kan fun boolubu.
Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Mounting material (screws, wall plugs)
- Ilana itọnisọna
Akiyesi: The E27 bulb is not included and must be purchased separately.
Eto ati fifi sori
- Mura agbegbe fifi sori ẹrọ: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Samisi Awọn aaye Liluho: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Awọn iho iho: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Asopọmọra Waya: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Gbe Imuduro: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Fi sori ẹrọ Bulb: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Aworan: Iwaju view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Awọn ilana Iṣiṣẹ
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Aworan: Alaye view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- Àkókò: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Agbegbe Iwari:
- Igun Wiwa: 120°
- Ibi idanimọ: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Giga Iṣagbesori ti o dara julọ: 1.8 meters for best performance.
Itoju
- Ninu: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Rirọpo Boolubu: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Ayewo: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Ko si ipese agbara. boolubu ti ko tọ. Incorrect LUX setting. | Ṣayẹwo Circuit fifọ. Rọpo boolubu. Adjust LUX dial towards the moon icon for darker conditions. |
| Imọlẹ duro nigbagbogbo. | A rii iṣipopada igbagbogbo. Incorrect TIME setting. | Ensure no objects are constantly moving in the detection zone. Ṣàtúnṣe TIME dial sí àkókò kúkúrú. |
| Sensọ išipopada ko ṣe iwari. | Obstruction in detection path. Incorrect LUX setting. Sensor dirty. | Ko eyikeyi idiwo kuro. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Awọn pato ọja
- Brand: O wuyi
- Nọmba awoṣe: 1000134854
- ASIN: B0B11KYHSW
- Awọn iwọn (L x W x H): 17 x 7.6 x 40 cm
- Ìwúwo: 490 giramu
- Ohun elo: Irin ti ko njepata
- Ohun elo iboji: Ṣiṣu
- Àwọ̀: Dudu
- Irú boolubu: E27 (Boolubu ko wa)
- Max Wattage: 20W (LED compatible)
- Nọmba Awọn Isusu: 1
- Orisun Agbara: Cable ina
- Iru fifi sori ẹrọ: Ògiri Ògiri
- Ẹya Pataki: Oluwari išipopada
- Iwọn IP: IP44 (Protection against splashing water)
- Motion Detector Angle: 120°
- Motion Detector Range: Up to 8m (both sides), max 10m
- Giga Iṣagbesori ti o dara julọ: 1.8m
Atilẹyin ọja ati Support
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant webaaye fun alaye atilẹyin ọja alaye ati awọn olubasọrọ atilẹyin.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.