1. Ifihan
O ṣeun fun riraasing the Xtreme Bluetooth Wireless Headphones. These headphones are designed to provide a comfortable and immersive audio experience, allowing you to stream audio wirelessly from Bluetooth-compatible devices up to 33 feet away. They feature built-in audio controls, a microphone for hands-free calls, and support for both auxiliary cable and Micro-SD card playback. Please read this manual carefully to ensure proper use and maintenance of your headphones.
2. Alaye Aabo
Lati rii daju iṣẹ ailewu ati yago fun ibajẹ, jọwọ ṣe akiyesi awọn iṣọra wọnyi:
- Do not expose the headphones to extreme temperatures, direct sunlight, or high humidity.
- Yago fun sisọ tabi tẹriba awọn agbekọri si awọn ipa to lagbara.
- Do not disassemble or attempt to repair the headphones yourself. This will void the warranty.
- Keep the headphones away from water and other liquids. They are not water resistant.
- Clean the headphones with a soft, dry cloth only. Do not use abrasive cleaners.
- Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
- Jeki kuro ni arọwọto awọn ọmọde.
3. Package Awọn akoonu
Jọwọ ṣayẹwo pe gbogbo awọn ohun kan wa ninu apo rẹ:
- Xtreme Bluetooth Wireless Headphones
- Micro-USB Ngba agbara USB
- 3.5mm Iranlọwọ Audio USB
4. Ọja Ipariview
Familiarize yourself with the components and controls of your Xtreme Bluetooth Wireless Headphones.
Image 1: Xtreme Bluetooth Wireless Headphones folded for compact storage.
Aworan 2: Apa view of the headphones, highlighting the Micro-USB charging port and 3.5mm auxiliary input.
Image 3: Close-up of the headphone controls, including power, volume, and playback buttons.
The headphones feature an over-ear design with soft ear cushions for comfort. The headband is adjustable, and the earcups can be folded for easy portability. On one earcup, you will find the control buttons, a Micro-USB charging port, a 3.5mm auxiliary input, and a Micro-SD/TF card slot.
5. Eto
5.1 Ngba agbara si awọn Agbekọri
Ṣaaju lilo akọkọ, gba agbara si awọn agbekọri rẹ ni kikun.
- Connect the small end of the included Micro-USB charging cable to the Micro-USB port on the headphones.
- Connect the larger end of the charging cable to a USB port on a computer or a USB wall adapter (not included).
- The LED indicator light will illuminate to show charging status.
- Charging typically takes approximately 2 hours. The LED indicator will change or turn off once charging is complete.
5.2 Titan / Pa a
- Lati Fi agbara: Press and hold the Power button until the LED indicator lights up and you hear an audible prompt.
- Lati Paarẹ: Press and hold the Power button until the LED indicator turns off and you hear an audible prompt.
5.3 Sisopọ Bluetooth
To connect your headphones wirelessly to a device:
- Rii daju pe awọn agbekọri ti gba agbara ni kikun ati agbara ni pipa.
- Tẹ bọtini agbara ki o si dimu fun bii awọn aaya 5-7 titi ti ifihan LED yoo fi tan bulu ati pupa ni ọna miiran, ti o fihan ipo isopọmọ.
- On your Bluetooth-enabled device (e.g., smartphone, tablet, computer), go to the Bluetooth settings and ensure Bluetooth is enabled.
- Wa fun available devices. The headphones should appear as "Xtreme Headphones" or a similar name.
- Select the headphones from the list to initiate pairing.
- Once successfully paired, the LED indicator on the headphones will flash blue slowly, and you will hear a confirmation tone.
- Awọn agbekọri yoo gbiyanju laifọwọyi lati tun sopọ si ẹrọ ti o so pọ to kẹhin nigbati o ba wa ni tan-an.
6. Awọn ilana Iṣiṣẹ
6.1 Ipilẹ idari
The headphones feature multiple built-in controls for convenient operation:
- Bọtini agbara: Tẹ ki o si dimu mọ lati tan/pa ina. Tẹ kukuru lati mu/danu orin tabi dahun/pari awọn ipe.
- Iwọn didun soke (+): Tẹ kukuru lati mu iwọn didun pọ si. Tẹ gun fun orin atẹle.
- Iwọn didun isalẹ (-): Tẹ kukuru lati dinku iwọn didun. Tẹ gun fun orin iṣaaju.
- Bọtini Ipo (M): Press to switch between Bluetooth, FM Radio (if available), and Micro-SD card modes.
- Gbohungbohun: For hands-free calls when connected via Bluetooth.
6.2 Ipo Iranlọwọ
Use the 3.5mm auxiliary cable for a wired connection to audio sources without Bluetooth capability or when the headphone battery is depleted.
- Connect one end of the 3.5mm auxiliary cable to the 3.5mm audio input port on the headphones.
- Connect the other end of the cable to the audio output jack of your device (e.g., phone, computer, gaming console).
- The headphones will automatically switch to auxiliary mode. Note that controls on the headphones may be limited in this mode, and audio will be controlled by the connected device.
6.3 Micro-SD Card Playback
The headphones support playback of audio files directly from a Micro-SD (TF) card.
- Insert a Micro-SD card (with audio files) into the TF card slot on the headphones.
- If the headphones are in another mode, press the Mode (M) button to switch to Micro-SD card playback mode.
- Playback will begin automatically. Use the Play/Pause, Volume Up (+), and Volume Down (-) buttons to control playback.
7. Itọju
7.1 Itọju ati Itọju
- Mu awọn agbekọri nu pẹlu asọ, gbẹ, asọ ti ko ni lint.
- Ma ṣe lo awọn olutọpa olomi, awọn sprays, tabi awọn kemikali lile.
- Yago fun gbigba ọrinrin sinu eyikeyi awọn ṣiṣi.
- The ear cushions can be gently wiped with a damp cloth and mild soap solution, then dried thoroughly.
7.2 Ibi ipamọ
Nigbati o ko ba wa ni lilo, tọju awọn agbekọri naa ni itura, aye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju. Apẹrẹ ti a ṣe pọ gba laaye fun ibi ipamọ iwapọ.
8. Laasigbotitusita
If you encounter issues with your headphones, refer to the following table for common problems and solutions.
| Isoro | Ojutu |
|---|---|
| Àwọn agbekọri kì yóò tan. | Ensure the headphones are fully charged. Connect to a power source using the Micro-USB cable. |
| Ko le so pọ pẹlu ẹrọ Bluetooth kan. | Ensure headphones are in pairing mode (flashing blue/red). Make sure Bluetooth is enabled on your device and it is within 33 feet. Forget previous pairings on your device and try again. |
| Ko si ohun tabi iwọn kekere. | Check volume levels on both the headphones and the connected device. Ensure the headphones are properly paired or the auxiliary cable is fully inserted. |
| Ohun ti wa ni daru tabi ge jade. | Move closer to the Bluetooth device to reduce interference. Ensure there are no obstacles between the headphones and the device. Check for other strong wireless signals nearby. |
| Micro-SD card not playing. | Ensure the Micro-SD card is inserted correctly and contains compatible audio files. Press the Mode button to switch to Micro-SD mode. |
9. Awọn pato
Technical details for the Xtreme Bluetooth Wireless Headphones Model XBH9-1023-BLK:
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | XBH9-1023-BLK |
| Brand | Àwọn Ẹ̀rọ Ìgbésí Ayé Oní-Dígítàlá Tó Gbéga Jùlọ |
| Asopọmọra Technology | Wireless (Bluetooth), Wired (3.5mm Auxiliary) |
| Alailowaya Ibaraẹnisọrọ | Bluetooth |
| Bluetooth Ibiti | Titi de 33 ẹsẹ (10 mita) |
| Awọn agbekọri Jack | 3.5 mm Jack |
| Akoko gbigba agbara | O fẹrẹ to awọn wakati 2 |
| Iwọn Igbohunsafẹfẹ | 20 Hz - 20,000 Hz |
| Apẹrẹ Akọti | Lori Eti |
| Fọọmù ifosiwewe | Lori Eti |
| Pataki Ẹya | Foldable Design, Micro-SD Card Slot |
| Iṣakoso Iru | Media Control Buttons |
| Omi Resistance Ipele | Ko Omi Resistant |
| Ohun elo | Ṣiṣu, Aṣọ, Silikoni |
| Àwọ̀ | Dudu |
| UPC | 805106228484 |
10. Atilẹyin ọja ati Support
10.1 atilẹyin ọja Alaye
For information regarding the warranty period and terms for your Xtreme Bluetooth Wireless Headphones, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased. Keep your proof of purchase for warranty claims.
10.2 Onibara Support
If you require further assistance or have questions not covered in this manual, please contact the manufacturer or your retailer's customer support department. Contact details can typically be found on the product packaging or the brand's official webojula.