Ọrọ Iṣaaju
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampJọ̀wọ́ ka á dáadáa kí o tó lò ó, kí o sì tọ́jú rẹ̀ fún ìtọ́kasí ọjọ́ iwájú.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Alaye Aabo
Lati rii daju iṣẹ ailewu ati yago fun ibajẹ, jọwọ ṣe akiyesi awọn iṣọra ailewu atẹle:
- Lilo inu ile Nikan: Eleyi lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Aabo Itanna: Rii daju pe lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Ikilọ Ooru: Awọn lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- Ibi Iduroṣinṣin: Gbe lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Mura kuro lọdọ awọn ọmọde ati awọn ohun ọsin: Due to the heat generated, keep the lamp kuro ni arọwọto awọn ọmọde ati awọn ohun ọsin.
- Afẹfẹ: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Okun ti bajẹ: Ti okun agbara ba bajẹ, o gbọdọ rọpo nipasẹ olupese tabi aṣoju iṣẹ ti o pe lati yago fun awọn ewu.
Package Awọn akoonu
Rii daju pe gbogbo awọn paati wa lori ṣiṣi silẹ:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Ṣeto
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Yọọ kuro: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
- Fifi sori ẹrọ boolubu: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Attach Cap: Place the decorative cap onto the top of the glass vessel.
- Ipo Lamp: Gbe awọn jọ lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- So agbara: So okùn agbára náà mọ́ inú ihò iná mànàmáná 120-volt déédéé.
Awọn ilana Iṣiṣẹ
Operating your Jambo Liquid Motion Lamp jẹ taara:
- Tan-an: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Akoko Igbagbona: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Iye akoko iṣẹ: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Paa: Lati pa lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Itoju
Proper care will ensure the longevity and performance of your lamp:
- Ninu: Rii daju pe lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp ninu omi.
- Rirọpo Boolubu: Tí gílóòbù náà bá jó, yọ lílò náà kúròamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Ibi ipamọ: Ti o ba tọju lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Maṣe ṣii: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Laasigbotitusita
If you encounter issues with your Jambo Liquid Motion Lamp, wo àwọn ìṣòro àti ojútùú tó wọ́pọ̀ wọ̀nyí:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Lamp ko tan. | No power, faulty bulb, or loose connection. | Ṣayẹwo boya lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Rii daju pe lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Awọn pato
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | KL-217 |
| Iwọn (D x W x H) | 11.4 cm x 11.4 cm x 39.4 cm (isunmọ 4.5 x 4.5 x 15.5 inches) |
| Igi iboji | 16 inches |
| Orisun agbara | Okun Itanna |
| Voltage | 120 Volts |
| Wattage | 30 Wattis |
| Boolubu Iru | Ohu |
| Bulb Base | E17 |
| Yipada Iru | Rotari |
| Ohun elo mimọ | Aluminiomu |
| Ohun elo iboji | Gilasi |
| Pari Iru | Irin |
| inu ile / ita gbangba Lo | Ninu ile |
| Omi Resistance Ipele | Ko mabomire |
| UPC | 850019692297 |
Atilẹyin ọja ati Support
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webojula fun alaye olubasọrọ.