PHOINIKAS G9000Max 2.4GHz Wireless Gaming Headset Instruction Manual

Ọrọ Iṣaaju

Thank you for choosing the PHOINIKAS G9000Max 2.4GHz Wireless Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and an immersive gaming experience. Please read this manual thoroughly before use and retain it for future reference.

Package Awọn akoonu

Your PHOINIKAS G9000Max Wireless Gaming Headset package should include the following items:

• PHOINIKAS G9000Max Wireless Gaming Headset
• Ariwo-Fagilee Gbohungbohun
• 2.4GHz USB Alailowaya Dongle
• 3.5mm Audio USB
• Okun Ngba agbara USB
• Afowoyi Olumulo (iwe-ipamọ yii)

Ọja Pariview

Image: Right earcup showing multi-function controls including 7.1 Stereo Sound button, Switching/Pause/Pairing button, LED Light button, Volume + and Volume - buttons, and USB port. Note: Key functions work only in wireless mode.

Image: A user wearing the PHOINIKAS G9000Max headset, highlighting the detachable noise cancellation microphone. The microphone is adjustable 360 degrees to pick up voice clearly.

Awọn ẹya pataki:

• 2.4GHz Lossless Wireless Technology: Provides a stable connection up to 49 feet with ultra-low latency (20ms).
• 7.1 Stereo Sound: Equipped with 40mm dynamic drivers for immersive audio, enhancing in-game details like footsteps and gunshots.
• Gbohungbohun Ariwo Ti A le Fagilee: Omnidirectional microphone with flexible adjustable angle and high-end noise reduction for clear communication.
• Apẹrẹ Ergonomic: Soft and breathable memory foam ear cups, adjustable headband for comfort during long gaming sessions.
• Igbesi aye batiri gigun: Up to 35-40 hours of playtime, or 15-20 hours with LED lights on. Fully charges in approximately 3 hours.
• Ibamu Olona Platform: Supports 2.4GHz USB receiver and 3.5mm wired connection for various devices.

Eto & Fifi sori

1. Ngba agbara si Agbekọri

Before first use, fully charge the headset. Connect the USB charging cable to the headset's USB port and to a power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off when fully charged. A full charge takes approximately 3 hours.

Image: The headset connected to a USB charging cable, illustrating the charging process.

2. So gbohungbohun

Insert the detachable microphone into the microphone jack located on the left earcup. Ensure it is securely connected. The microphone can be adjusted 360° for optimal positioning.

Image: A hand attaching the detachable microphone to the headset's microphone port.

3. Connecting via 2.4GHz Wireless Mode (Recommended for Gaming)

This mode offers ultra-low latency and is ideal for PS5, PS4, PC, Mac, and Nintendo Switch (audio only, microphone invalid).

1. Plug the 2.4GHz USB wireless dongle into an available USB port on your gaming console (PS5/PS4), PC, Mac, or Nintendo Switch dock.
2. Power on your headset by pressing and holding the Power/Pairing button until the LED indicator flashes.
3. The headset will automatically pair with the USB dongle. A solid LED light on the headset indicates a successful connection.

Image: Diagram illustrating multi-platform compatibility for 2.4GHz wireless mode, showing connections to PS4/PS5, PC, Nintendo Switch, and Laptop. Note: Not compatible with Xbox One in 2.4GHz wireless mode.

4. Connecting via 3.5mm Wired Mode

This mode is compatible with PS4/PS5 controllers, Nintendo Switch, Xbox controllers (requires additional adapter for non-3.5mm ports), PC, Mac, Laptop, Tablet, and Mobile Phone. Note: Lights and mute function are inactive in wired mode.

1. So opin kan ti okun ohun afetigbọ 3.5mm pọ si jaketi ohun afetigbọ 3.5mm agbekari.
2. Connect the other end of the 3.5mm audio cable to the audio output port of your device (e.g., controller, phone, PC).
3. For PC/Mac, a 1-in-2 Y-splitter may be needed if your device has separate audio and microphone jacks.

Image: The headset connected to a device using the 3.5mm audio cable, demonstrating wired connectivity.

Awọn ilana Iṣiṣẹ

Titan / Paa

• Agbara Tan: Press and hold the Power/Pairing button for 3 seconds. The LED indicator will light up.
• Agbara Pa: Press and hold the Power/Pairing button for 3 seconds. The LED indicator will turn off.

Iṣakoso iwọn didun

Use the 'Volume +' and 'Volume -' buttons on the earcup to adjust the audio output level.

Gbohungbohun Lilo

• Pakẹ́/Yipadanu: Press the dedicated Mute button on the earcup to toggle the microphone on or off. (Note: Mute function is inactive in 3.5mm wired mode).
• Ensure the microphone is properly inserted and positioned close to your mouth for clear voice pickup.

Awọn imọlẹ LED

Press the 'LED Light' button on the earcup to turn the headset's LED lights on or off. (Note: LED lights are only available in 2.4GHz wireless mode).

Ato ibamu

Refer to the table below for detailed compatibility information across different devices and connection modes.

Image: A detailed compatibility table showing audio and microphone functionality for various devices (PC, Mac, Laptop, PS4/PS5, Switch, Xbox, Tablet, Cell Phone) in both 2.4GHz Wireless Mode and Wired Mode.

Itoju

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu agbekọri naa. Maṣe lo awọn kemikali lile tabi awọn ohun elo ti o nfi pa ara.
• Ibi ipamọ: Tọju agbekari naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Itọju Batiri: Lati pẹ aye batiri, yago fun gbigba agbara agbekari ni kikun nigbagbogbo. Gba agbara rẹ nigbagbogbo, paapaa ti kii ba lo fun awọn akoko gigun.
• Itọju Gbohungbohun: Handle the detachable microphone carefully. Avoid bending it excessively.

Laasigbotitusita

• No Sound/Microphone Not Working (Wireless Mode):
  • Ensure the 2.4GHz USB dongle is securely plugged into the device.
  • Verify the headset is powered on and successfully paired (solid LED light).
  • Check device audio settings to ensure the headset is selected as the input/output device.
  • For Nintendo Switch, the microphone is not supported in wireless mode.
• No Sound/Microphone Not Working (Wired Mode):
  • Ensure the 3.5mm audio cable is fully inserted into both the headset and the device.
  • Ṣayẹwo awọn eto ohun ẹrọ.
  • For PC/Mac, ensure a 1-in-2 Y-splitter is used if separate jacks are present.
  • For Xbox series, an additional adapter may be required for non-3.5mm controller ports.
• Agbekọri Ko Ngba agbara:
  • Verify the USB charging cable is connected correctly to both the headset and the power source.
  • Gbiyanju ibudo USB ti o yatọ tabi ohun ti nmu badọgba gbigba agbara.
• Igbesi aye batiri kukuru:
  • Rí i dájú pé agbekọri naa ti gba agbara ni kikun (ni iwọn wakati meji).
  • Turning off the LED lights can extend battery life.

Awọn pato

Atilẹyin ọja & Atilẹyin

PHOINIKAS products are sent out after 100% quality inspection. For any issues or support needs, please contact our professional team. We are committed to resolving your concerns and ensuring your satisfaction.

Jọwọ tọka si iwe aṣẹ rira rẹ fun awọn alaye atilẹyin ọja kan pato ati alaye olubasọrọ.