1. Ifihan
The Technoline WS 8016 is a modern radio-controlled wall clock designed for clear readability and versatile display options. It automatically synchronizes with the DCF-77 radio signal for precise timekeeping. This manual provides detailed instructions for setting up and operating your clock.
Awọn ẹya pataki pẹlu:
- Radio-controlled time (DCF-77) with manual setting option
- 12/24 hour time format display
- Eto agbegbe aago
- Date and weekday display in 7 languages
- Indoor temperature display in Celsius (°C) or Fahrenheit (°F)
- Indoor humidity display in percentage relative humidity (% RH)
- Two independent alarm settings
- Flexible placement: wall-mountable or tabletop stand
2. Alaye Aabo pataki
- Ka gbogbo awọn ilana ni pẹkipẹki ṣaaju lilo ẹrọ naa.
- Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.
- Ma ṣe fi aago naa han si awọn iwọn otutu to gaju, oorun taara, tabi ọriniinitutu giga.
- Use only the specified battery type (2 x AA Mignon LR06).
- Sọ awọn batiri ti a lo daradara ni ibamu si awọn ilana agbegbe.
- Ma ṣe gbiyanju lati tunto tabi tun ẹrọ naa funrararẹ. Kan si oṣiṣẹ ti o peye fun iṣẹ.
3. Package Awọn akoonu
- Technoline WS 8016 Digital Radio-Controlled Wall Clock
- Ilana Afowoyi (iwe yii)
Akiyesi: 2 x AA Mignon LR06 batteries are not included and must be purchased separately.
4. Ọja Ipariview
Familiarize yourself with the clock's display and controls.
Nọmba 1: Main display of the Technoline WS 8016 clock. It clearly presents the current time (e.g., 10:30), the radio signal reception icon, two alarm indicators (1 M-F, 2 S-S), indoor temperature (e.g., 23.2°C), weekday (e.g., MONTAG), date (e.g., 29/JAN/2019), and indoor humidity (e.g., 76% RH).
Nọmba 2: Physical dimensions of the Technoline WS 8016 clock, measuring 22.5 cm in width and 14.3 cm in height.
Control Buttons (Typically located on the back or side):
- Ṣeto: Ó wọ ipo eto, ó sì jẹ́rìí sí àwọn eto náà.
- UP / +: Increases values, cycles through options.
- DOWN / -: Decreases values, cycles through options.
- Ipo: Switches display modes, exits setting mode.
- IKỌ: Accesses and sets alarm functions.
- 12/24: Toggles between 12-hour and 24-hour time formats.
- °C/°F: Ó máa ń yí padà láàrín àwọn ìwọ̀n otútù Celsius àti Fahrenheit.
5. Eto
5.1 Fifi sori batiri
- Wa ideri iyẹwu batiri ni ẹhin aago naa.
- Yọ ideri kuro.
- Insert 2 x AA Mignon LR06 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Rọpo ideri iyẹwu batiri ni aabo.
5.2 Automatic Time Synchronization (DCF-77)
After battery insertion, the clock will automatically begin searching for the DCF-77 radio signal. This process can take several minutes to an hour, depending on your location and environmental conditions.
- Place the clock near a window, away from electronic devices that may cause interference, for optimal signal reception.
- A radio tower icon on the display will flash during signal search and become solid when the signal is successfully received and synchronized.
- If the signal is not received within 10 minutes, try repositioning the clock and wait for the next automatic synchronization attempt (usually hourly or daily).
6. Awọn ilana Iṣiṣẹ
6.1 Eto Aago Afowoyi
If the radio signal is unavailable or you prefer to set the time manually:
- Tẹ mọlẹ SET button for approximately 3 seconds to enter the manual setting mode. The first adjustable value will flash.
- Lo awọn UP or SILE buttons to adjust the flashing value (e.g., hour, minute).
- Tẹ SET briefly to confirm the current setting and move to the next adjustable parameter.
- Repeat steps 2 and 3 for all settings: hour, minute, 12/24h format, time zone, year, month, day, weekday language, and temperature unit.
- To exit setting mode, press the MODE button or wait for 15 seconds without pressing any button.
6.2 12/24 Wakati kika
Ni ipo ifihan akoko deede, tẹ bọtini naa 12/24 Bọtini lati yi laarin awọn wakati 12 (pẹlu itọkasi AM/PM) ati awọn ọna kika wakati 24.
6.3 Time Zone Eto
During manual time setting (Section 6.1), you can adjust the time zone offset (e.g., +1, -1 hour) if your location is outside the standard DCF-77 signal's time zone.
6.4 Date and Weekday Language
During manual time setting (Section 6.1), you can select the display language for the weekday. Options typically include English, German, French, Spanish, Italian, Dutch, and Danish.
6.5 iwọn otutu Unit
Ni ipo ifihan akoko deede, tẹ bọtini naa ° C / ° F button to switch the indoor temperature display between Celsius and Fahrenheit.
6.6 Itaniji Eto
The clock features two independent alarms: Alarm 1 (typically for Monday-Friday) and Alarm 2 (typically for Saturday-Sunday).
- Tẹ awọn Itaniji button repeatedly to cycle through Alarm 1, Alarm 2, and Alarm Off display modes.
- To set an alarm, select the desired alarm (Alarm 1 or Alarm 2) and then press and hold the Itaniji button for approximately 3 seconds. The alarm hour will flash.
- Lo awọn UP or SILE awọn bọtini lati ṣatunṣe aago itaniji. Tẹ Itaniji to confirm and move to the alarm minute setting.
- Lo awọn UP or SILE buttons to adjust the alarm minute. Press Itaniji láti jẹ́rìísí àti láti jáde kúrò ní ipò ètò ìkìlọ̀.
- To activate or deactivate an alarm, briefly press the Itaniji button when the alarm time is displayed. An alarm icon (e.g., a bell) will appear on the display when the alarm is active and disappear when it is deactivated.
7. Itọju ati Itọju
Ninu: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.
Rirọpo Batiri: Replace the batteries when the low battery indicator appears on the display. Always replace both batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.
8. Itọsọna Laasigbotitusita
| Isoro | Ojutu |
|---|---|
| No time display / Incorrect time | Check battery installation and ensure batteries have sufficient charge. Ensure the clock is within range of the DCF-77 signal. If the signal is weak or unavailable, manually set the time as described in Section 6.1. |
| Radio signal icon not displayed or flashing continuously | Move the clock closer to a window or an open area. Avoid placing it near large metal objects or electronic devices (TVs, computers, microwaves) that may cause interference. Wait for the next automatic synchronization attempt. |
| Temperature/Humidity readings are inaccurate | Ensure the clock is not exposed to direct sunlight, drafts, or heat sources (e.g., radiators, appliances). Allow time for readings to stabilize after initial setup or relocation. |
| Itaniji ko dun | Verify that the alarm is activated (alarm icon displayed). Check that the alarm time is set correctly. Ensure batteries are not depleted. |
9. Imọ ni pato
- Awoṣe: WS8016
- Awọn iwọn (L x W x H): 22.5 x 3.81 x 14.3 cm (8.86 x 1.5 x 5.63 inches)
- Ìwúwo: 404 g (0.89 lbs)
- Ohun elo: Ṣiṣu
- Ibi ti ina elekitiriki ti nwa: 2 x AA Mignon LR06 batteries (not included)
- Ilana akoko: 12/24 wakati yan
- Awọn ẹya pataki: DCF-77 Radio Control, Indoor Temperature Display, Indoor Humidity Display, Calendar Display, 2 Alarm Settings
10. Atilẹyin ọja ati Onibara Support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card or documentation included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or visit the official Technoline webaaye fun alaye siwaju.