Roxicosly CR1023 Digital Alarm Clock Instruction Manual

1. Ifihan

Thank you for choosing the Roxicosly CR1023 Digital Alarm Clock. This user-friendly device features a large, mirrored display, dual alarms, adjustable brightness, a night light, and convenient charging ports. This manual provides detailed instructions to help you set up and operate your new alarm clock effectively.

Image: The Roxicosly Digital Alarm Clock, highlighting its mirrored display and key features such as large digital display, dimmer, snooze, night light, dual alarm, volume knob, 12/24H format, USB/Type-C charging, and DST indicator.

2. Package Awọn akoonu

• 1x Roxicosly CR1023 Digital Alarm Clock
• 1x DC Adapter & USB Cable
• 1x Itọsọna olumulo

Image: The Roxicosly Digital Alarm Clock, its power adapter, and USB cable, laid out next to the product box and manual.

3. Eto

3.1 Asopọ agbara

1. Connect the provided DC adapter to the DC jack on the back of the alarm clock.
2. Plug the DC adapter into a standard wall outlet. The clock display will illuminate.

3.2 Afẹyinti Batiri (Iyan)

Fun agbara afẹyinti nigba rẹtages, install 2 AAA batteries (not included) into the reserved slot on the back of the clock. These batteries will preserve time and alarm settings. During a power outage, the screen will go blank, but the alarm function will remain active. The correct time will display once main power is restored.

Aworan: Ẹyin view of the alarm clock with the battery compartment open, showing where to insert AAA backup batteries.

4. Awọn ilana Iṣiṣẹ

4.1 Eto Aago ati Ọjọ

1. Tẹ awọn TIME/DST button on the back of the clock. The hour digits will flash.
2. Lo awọn + or - awọn bọtini lati ṣatunṣe awọn wakati.
3. Tẹ TIME/DST again to set the minutes, then use + or - lati ṣatunṣe.
4. Tesiwaju titẹ TIME/DST to cycle through setting the year, month, and day, adjusting each with + or -.
5. Tẹ TIME/DST one last time to confirm all settings.

4.2 12H/24H Format & DST

• Láti yípadà láàrín àwọn ọ̀nà ìgbà wákàtí méjìlá sí wákàtí mẹ́rìnlélógún, tẹ ẹ̀rọ náà 12/24H bọtini.
• To activate or deactivate Daylight Saving Time (DST), press and hold the TIME/DST bọtini.

Image: The alarm clock displaying time in 12-hour, 24-hour, and with Daylight Saving Time (DST) activated.

4.3 Ṣíṣeto Awọn Itaniji (Awọn Itaniji Meji)

The clock supports two independent alarms (Alarm 1 and Alarm 2).

1. Tẹ awọn OOGUN 1 or OOGUN 2 Bọ́tìnì náà. Àwọn nọ́mbà wákàtí fún ìró tí a yàn yóò máa tàn yanranyanran.
2. Lo awọn + or - awọn bọtini lati ṣatunṣe aago itaniji.
3. Tẹ awọn ti o baamu Itaniji button again to set the minutes, then use + or - lati ṣatunṣe.
4. Tẹ awọn Itaniji bọtini kan kẹhin akoko lati jẹrisi.
5. To turn an alarm ON or OFF, use the dedicated ALM ON/OFF switch for Alarm 1 or Alarm 2.

4.4 Ṣíṣe àtúnṣe iwọn didun itaniji

Adjust the alarm volume using the physical twist knob located on the back of the clock. There are 7 volume levels (70-118 dB) to suit your preference.

Image: The alarm clock displaying two different alarm times (7:30 and 15:30) and illustrating the 7 adjustable increasing volume levels.

4.5 Display Brightness (0-100% Dimmer)

The digital display brightness can be adjusted from 0% to 100% using the physical twist knob on the back of the clock. This allows you to set a comfortable brightness level for day or night without disturbing your sleep.

Image: The alarm clock with large, bold numbers and a visual representation of the 0-100% full-range dimmer functionality.

4.6 Night Light & Snooze Function

• The clock features a built-in night light at the back with 3 adjustable brightness settings.
• To activate or adjust the night light, press the large button on the top of the clock.
• When an alarm sounds, press the large button on the top for a 9-minute snooze.

Image: The alarm clock on a nightstand, illustrating the night light feature with three brightness levels and the large top button for snooze.

4.7 Awọn ibudo gbigba agbara

The clock is equipped with two charging ports on the back:

• 1x USB charging port
• 1x Type-C charging port

These ports allow you to charge up to two mobile devices simultaneously, making it ideal for overnight charging.

Image: The alarm clock on a desk, showing a smartphone and wireless earbuds charging via its USB and Type-C ports.

5. Itọju

• Clean the clock's mirrored surface and body with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ensure the clock is unplugged before cleaning.
• Pa aago naa mọ kuro ninu omi ati ọriniinitutu giga.

6. Laasigbotitusita

7. Awọn pato

• Brand: Roxicosly
• Awoṣe: CR1023
• Iru ifihan: Digital LED with Mirrored Face
• Iwọn Ifihan: 7 inches (approx. 6.5"W x 3.03"H)
• Orisun Agbara: DC (Plug-in)
• Batiri Afẹyinti: 2x AAA batteries (not included) for memory retention
• Dimmer: 0-100% Full Range Dimmer (adjustable via knob)
• Itaniji: Dual Alarms with 7 Volume Levels (70-118 dB)
• Sun 9 iṣẹju
• Imọlẹ alẹ: Built-in, 3 adjustable brightness settings
• Awọn ibudo gbigba agbara: 1x USB, 1x Iru-C
• Ilana akoko: 12H/24H selectable
• Awọn ẹya pataki: DST (Daylight Saving Time) function
• Ohun elo: Acrylonitrile Butadiene Styrene (ABS)
• Iru fifi sori: Tabili

8. Official ọja Video

9. Atilẹyin ọja & Atilẹyin

If you have any questions or require assistance with your Roxicosly CR1023 Digital Alarm Clock, please feel free to contact us. Refer to your product packaging or purchase platform for specific warranty details and customer support contact information.