Elementi Granville 60 Inch Rectangular Concrete Natural Gas Fire Pit Table User Manual

Alaye Aabo pataki

Please read and understand all instructions and safety warnings before assembling, operating, or servicing this fire pit. Failure to follow these instructions could result in property damage, bodily injury, or even death.

• This fire pit is designed for ita gbangba lilo nikan. Do not operate indoors or in an enclosed area.
• Ensure proper ventilation and clearance from combustible materials as specified in local codes and regulations.
• This unit uses Gaasi Adayeba. Do not attempt to convert it to use propane or any other fuel type.
• Installation and service must be performed by a insitola ti o peye, ile-iṣẹ iṣẹ, tabi olupese gaasi.
• Always keep children and pets away from the fire pit during operation and while it is cooling down.
• Ma ṣe tọju tabi lo epo petirolu tabi awọn ina ina miiran ati awọn olomi ni agbegbe eyi tabi eyikeyi ohun elo miiran.
• The fire pit is equipped with an auto safety shut-off mechanism for your protection.
• Ilana 65 Ikilọ: Ọja yii le fi ọ han si awọn kemikali pẹlu erogba monoxide, eyiti o mọ si Ipinle California lati fa awọn abawọn ibimọ tabi ipalara ibisi miiran. Fun alaye diẹ sii lọ si www.P65Warnings.ca.gov.

Ọja Pariview

The Elementi Granville Fire Pit Table is a sophisticated outdoor heating solution crafted from high-performance cast concrete. It features a 16-gauge, 304 stainless steel burner ring and pan, providing a heat output of 45,000 BTUs. This natural gas fire pit is designed to enhance your outdoor living space with both warmth and aesthetic appeal.

Aworan: The Elementi Granville 60-inch fire pit table shown with its tempered glass windscreen, stainless-steel cover, and canvas cover.

Awọn eroja to wa:

• Elementi Granville 60-inch Fire Pit Table (Natural Gas)
• Tempered Glass Windscreen
• Stainless-Steel Burner Cover
• Canvas Weather Cover
• Lava Rocks (13.2 lbs)
• Apo atunṣe

Ṣeto

Due to the substantial weight of the fire pit (approximately 176 lbs), it is recommended to have at least two people for safe handling and placement.

1. Ibi:

Choose a level, stable surface for the fire pit, ensuring adequate clearance from any combustible materials. Refer to local building codes for specific requirements.

2. Asopọ gaasi:

This natural gas fire pit requires connection to a natural gas supply line. It is dandan that this connection is performed by a certified and licensed professional to ensure safety and compliance with all local gas codes.

3. Lava Rock Placement:

Carefully distribute the provided lava rocks evenly over the burner pan. Ensure that the igniter and burner holes are not completely covered to allow for proper ignition and flame distribution.

Aworan: The fire pit with lava rocks in place and flames ignited, demonstrating proper rock distribution.

4. Windscreen Installation (Optional but Recommended):

The tempered glass windscreen helps to block breezes and stabilize the flames. Assemble the glass panels using the provided brackets and place it securely around the burner area.

Aworan: The tempered glass windscreen, designed to protect flames from wind.

Aworan: Diagram showing the dimensions of the tempered glass windscreen: 43.5" L x 13" W x 7" H.

Awọn ilana Iṣiṣẹ

Always ensure the area around the fire pit is clear of debris and flammable materials before ignition.

1. Ibanuje:

1. Locate the control panel on the side of the fire pit.
2. Rii daju pe àtọwọdá ipese gaasi wa ni sisi.
3. Push and turn the control knob to the 'ON' position while simultaneously pressing the 'IGNITER' button.
4. Hold the control knob in for a few seconds after ignition to allow the thermocouple to heat up and engage the safety shut-off.
5. If the flame does not ignite, release the knob, wait 5 minutes for gas to dissipate, and repeat the process.

Aworan: Close-up of the control panel with the igniter button and gas flow control knob.

2. Adjusting Flame Height:

Once ignited, rotate the control knob to adjust the flame height from 'LOW' to 'HIGH' as desired.

3. Tiipa:

To turn off the fire pit, turn the control knob to the 'OFF' position. Ensure the gas supply valve is fully closed when the fire pit is not in use.

Itoju

Regular maintenance will ensure the longevity and safe operation of your Elementi fire pit.

1. Ninu:

• Gba ọfin iná laaye lati tutu patapata ṣaaju ṣiṣe mimọ.
• Wipe concrete surfaces with a damp asọ ati ìwọnba detergent. Yago fun abrasive ose.
• Clean the stainless steel burner and pan as needed to remove any debris or residue.

2. Protection from Elements:

Utilize the provided covers to protect your fire pit when not in use.

• Canvas Weather Cover: Use this heavy-duty cover to protect the entire fire pit from harsh weather conditions, dust, and debris.

Aworan: The custom-fit canvas cover for protecting the fire pit from weather.

• Stainless-Steel Burner Cover: Place this cover over the burner area when the fire pit is not in use to keep the lava rocks and burner clean and protected.

Aworan: The stainless-steel cover designed to protect the burner area when not in use.

Aworan: Diagram showing the dimensions of the stainless steel burner cover: 42" L x 12" W x 1" H.

Laasigbotitusita

If you encounter issues with your fire pit, please review the common problems and solutions below. For persistent issues, contact a qualified service technician or Elementi customer support.

Awọn pato

• Brand: Elementi
• Nọmba awoṣe: OFG121NG + OFG121SS + OFG121WS
• Ohun elo: High-Performance Cast Concrete
• Pari Iru: Nja
• Apẹrẹ: onigun merin
• Iru epo: Gaasi Adayeba
• O wu Ooru: 45,000 BTU
• Fire Pit Dimensions: 60" L x 27" W x 17" H
• Fire Pit Weight: 176 lbs
• Burner Ring Length: 30" L
• Glass Windscreen Dimensions: 43.5" L x 13" W x 7" H
• Canvas Cover Dimensions: 62" L x 29" W x 17" H
• Stainless Steel Cover Dimensions: 42" L x 12" W x 1" H
• Lava Rocks Included: 13.2 lbs
• Awọn iwe-ẹri: CSA & CE Certified
• UPC: 193802315608

Atilẹyin ọja ati Support

For information regarding product warranty, technical support, or replacement parts, please refer to the official Elementi website or contact their customer service department directly. Keep your purchase receipt and model number readily available for any inquiries.

Elementi Direct, LLC
Olupese