JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

JEYI M.2 NVMe SSD Enclosure
Awọn paadi gbona
Screwdriver
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Lanyard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Awọn ilana iṣeto

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Mura Apoti naa: Gently slide open the enclosure to reveal the internal PCB.
Waye Paadi Gbona: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Ṣe aabo SSD naa: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Pa Apoti naa: Carefully slide the enclosure cover back into place until it clicks securely.

Bugbamu view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Awọn ilana Iṣiṣẹ

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Sopọ si Ẹrọ: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Atọka Agbara: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Gbigbe Data: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Itoju

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Isakoso Ooru: aluminiomu casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta àpò náà. Yẹra fún lílo àwọn ohun ìfọṣọ omi tàbí àwọn ohun èlò ìfọṣọ.
Ibi ipamọ: Nigbati o ko ba si ni lilo, tọju apade naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
Itọju USB: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Laasigbotitusita

Isoro	Owun to le Fa	Ojutu
Enclosure not detected by computer.	Loose USB asopọ. SSD ko fi sori ẹrọ daradara. SSD not initialized/formatted. Faulty USB port or cable.	Rii daju pe awọn kebulu ti sopọ ni aabo. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Gbiyanju ibudo USB miiran tabi okun USB.
Awọn iyara gbigbe data lọra.	Connected to a slower USB port (e.g., USB 2.0). Thermal throttling due to high temperature. Awọn idiwọn iṣẹ ṣiṣe SSD.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Awọn pato

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Awoṣe	I9-Seal
Brand	JEYI
Ni wiwo Hardware	USB 3.2 Gen 2 (USB-C)
Data Gbigbe Oṣuwọn	Titi di 10 Gbps
Iru SSD ti o baamu	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Agbara Ibi ipamọ ti o pọju	4 TB
Chipset	JMS583 A3
Awọn ẹya ara ẹrọ	UASP Support, TRIM Support, Win to Go (WTG) Support
Ohun elo	Aluminiomu Alloy
Àwọ̀	Fadaka
Ọja Mefa	4.06 x 1.02 x 0.39 inches (103 x 26 x 10 mm)
Iwọn Nkan	0.317 iwon (9 giramu)
Ibamu Awọn ọna ṣiṣe	Windows, MacOS, Lainos, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the official JEYI webAaye ayelujara tabi kan si iṣẹ alabara wọn taara. Awọn alaye nipa awọn akoko atilẹyin ọja kan pato ati awọn ikanni atilẹyin ni a maa n pese pẹlu awọn iwe aṣẹ rira rẹ tabi lori olupese webojula.

Olupese: JEYI

Webojula: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.