AQIRYS Mira 65% Mechanical Keyboard User Manual

Ọrọ Iṣaaju

The AQIRYS Mira is a compact 65% mechanical keyboard designed for versatility and performance. It offers triple connectivity options: wired USB-C, 2.4GHz wireless, and Bluetooth, making it compatible with PC, Mac, mobile devices, and consoles. Featuring Outemu Red mechanical switches, N-key rollover, full anti-ghosting, and dynamic RGB backlighting, the Mira keyboard provides a responsive and customizable typing and gaming experience. Its hot-swap design allows for easy switch replacement.

Image: The AQIRYS Mira 65% Mechanical Keyboard, showcasing ìṣètò kékeré rẹ̀ àti ìmọ́lẹ̀ RGB tó lágbára.

Ṣeto

Package Awọn akoonu

• AQIRYS Mira 65% Mechanical Keyboard
• USB-C si okun USB-A
• 2.4GHz Wireless Dongle (typically stored in the keyboard's battery compartment or a dedicated slot)
• Keycap Puller (optional, for maintenance)
• Switch Puller (optional, for maintenance)

Ngba agbara si Keyboard

Before initial use, ensure the keyboard is fully charged. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a USB wall adapter. The charging indicator will show the charging status.

Awọn ọna Asopọmọra

The AQIRYS Mira keyboard supports three connection modes: Wired, 2.4GHz Wireless, and Bluetooth. A switch on the keyboard (usually on the back or side) allows you to select the desired mode.

1. Ti firanṣẹ Asopọ

1. Set the mode switch on the keyboard to the 'Wired' or 'USB' position.
2. Connect the USB-C cable to the keyboard and the USB-A end to your computer.
3. Awọn bọtini itẹwe yoo jẹ idanimọ laifọwọyi nipasẹ ẹrọ iṣẹ rẹ.

2. 2.4GHz Asopọ Alailowaya

1. Locate the 2.4GHz USB dongle.
2. Plug the USB dongle into an available USB port on your computer or device.
3. Ṣètò ìyípadà mode lórí keyboard sí ipò '2.4G'.
4. Awọn keyboard yẹ ki o sopọ laifọwọyi. Ti kii ba ṣe bẹ, tẹ Fn + P fun iṣẹju-aaya 3 lati pilẹṣẹ sisopọ.

3. Asopọ Bluetooth

The keyboard can pair with up to three different Bluetooth devices.

1. Set the mode switch on the keyboard to the 'BT' position.
2. To enter pairing mode for a specific slot (BT1, BT2, or BT3), press and hold Fn + Q (fun BT1), Fn + W (fun BT2), tabi Fn + E (for BT3) for 3-5 seconds. The corresponding key (Q, W, or E) will flash rapidly, indicating pairing mode.
3. On your device (PC, Mac, mobile), enable Bluetooth and search for new devices. Select "AQIRYS Mira" from the list.
4. Once paired, the flashing light will become solid for a few seconds and then turn off.
5. Láti yípadà láàrín àwọn ẹ̀rọ Bluetooth tí a sopọ̀, tẹ kúkúrú Fn + Q, Fn + W, tabi Fn + E.

Aworan: Apa view of the AQIRYS Mira keyboard, highlighting the USB-C port for wired connection and charging.

Awọn ilana Iṣiṣẹ

Awọn iṣẹ pataki ati awọn akojọpọ

The AQIRYS Mira keyboard features a 68-key US layout. Many functions are accessed via the Fn bọtini ni apapo pẹlu miiran awọn bọtini.

• Fn + 1/2/3: Yipada laarin awọn ẹrọ Bluetooth (BT1, BT2, BT3).
• Fn + P: Initiate 2.4GHz pairing (hold for 3 seconds).
• Fn + Backspace: Delete key.
• Fn + \|: Yipada awọn ipa imọlẹ ẹhin.
• Fn + [{: Din ina backlight din.
• Fn + ]}: Mu imọlẹ ina ẹhin pọ si.
• Fn + ;:: Din iyara backlight.
• Fn + '"': Mu iyara ina pada pọ si.
• Fn + ,<: Decrease backlight color (for static modes).
• Fn + .>: Increase backlight color (for static modes).
• Fn + Ọfà osi: Ti tẹlẹ orin.
• Fn + Ọfà Ọtun: Itele orin.
• Fn + Ọfà oke: Iwọn didun soke.
• Fn + Ọfà isalẹ: Iwọn didun isalẹ.
• Fn + Wọle: Ṣiṣẹ / Sinmi.
• Fn + Gba: Titiipa/Ṣii bọtini Windows.

Isọdi Backlight

The keyboard features full RGB dynamic backlighting. Basic adjustments can be made using Fn key combinations as listed above. For in-depth customization, including per-key lighting and advanced effects, connect the keyboard in wired mode and use the dedicated AQIRYS software (available for download from the official AQIRYS webaaye).

N-Key Rollover and Anti-Ghosting

The Mira keyboard supports N-key rollover and full anti-ghosting, ensuring that every keystroke is registered accurately, even when multiple keys are pressed simultaneously. This is particularly beneficial for fast typing and gaming.

Hot-Swap Switch Design

The keyboard's hot-swap design allows you to change mechanical switches without soldering. It is compatible with Outemu 3-pin switches. This feature enables customization of typing feel and easy replacement of faulty switches.

Image: Close-up of the AQIRYS Mira keyboard's keycaps, illustrating the US layout and RGB backlighting.

Itoju

Ninu Keyboard

• Yiyọ eruku kuro: Lo agolo afẹ́fẹ́ tí a ti fún ní ìfúnpọ̀ láti fẹ́ eruku àti ìdọ̀tí kúrò láàárín àwọn ìbòrí kọ́kọ́rọ́ náà.
• Isọdanu Oju: Gently wipe the keycaps and chassis with a soft, lint-free cloth dampened pẹlu kekere iye ti omi tabi kan ìwọnba, ti kii-abrasive ninu ojutu. Yago fun ọrinrin pupọ.
• Isọsọ jinle: For thorough cleaning, you may use a keycap puller to remove keycaps and clean the switches and plate underneath. Ensure the keyboard is powered off and disconnected before removing keycaps.

Switch Replacement (Hot-Swap)

The AQIRYS Mira keyboard features hot-swappable switches, allowing for easy replacement without soldering.

1. Agbara Pa: Ensure the keyboard is disconnected from power and turned off.
2. Yọ bọtini bọtini kuro: Use a keycap puller to carefully remove the keycap from the switch you wish to replace.
3. Yọ Yipada: Use a switch puller to grasp the top and bottom clips of the switch. Gently pull the switch straight up and out of the PCB.
4. Fi Yipada Tuntun sii: Align the pins of the new Outemu 3-pin compatible switch with the holes on the PCB. Press the switch firmly until it clicks into place. Ensure the pins are not bent.
5. Rọpo bọtini bọtini: Gbe bọtini bọtini pada si ori iyipada tuntun.

Aworan: Omiiran view of the AQIRYS Mira keyboard, highlighting the keycap profiles and overall design.

Laasigbotitusita

• Keyboard ti ko dahun (Ti firanṣẹ):
  • Rii daju pe okun USB-C ti sopọ ni aabo si keyboard mejeeji ati kọnputa naa.
  • Gbiyanju ibudo USB ti o yatọ lori kọnputa rẹ.
  • Ensure the keyboard mode switch is set to 'Wired' or 'USB'.
• Keyboard not responding (2.4GHz Wireless):
  • Ensure the 2.4GHz USB dongle is securely plugged into your device.
  • Ensure the keyboard mode switch is set to '2.4G'.
  • Ṣàyẹ̀wò bóyá batiri keyboard ti gba agbára.
  • Try re-pairing by holding Fn + P fun 3 aaya.
• Awọn oran sisopọ Bluetooth:
  • Ensure the keyboard mode switch is set to 'BT'.
  • Rii daju pe Bluetooth ẹrọ rẹ ti ṣiṣẹ ati wiwa.
  • Make sure the keyboard is in pairing mode (e.g., Fn + Q held for 3-5 seconds, with the key flashing).
  • Forget the device from your computer's Bluetooth settings and try pairing again.
  • Try pairing to a different Bluetooth slot (BT1, BT2, BT3).
• Awọn bọtini ti kii ṣe iforukọsilẹ tabi titẹ-meji:
  • Ṣàyẹ̀wò fún èyíkéyìí ìdọ̀tí lábẹ́ ìbòrí kọ́kọ́rọ́ tàbí ní àyíká ìyípadà náà.
  • If a specific switch is faulty, consider replacing it using the hot-swap feature.
• Imọlẹ ẹhin ko ṣiṣẹ tabi dinku:
  • Rí i dájú pé batiri keyboard ti gba agbára.
  • Ṣatunṣe imọlẹ nipa lilo Fn + [{ ati Fn +]}.
  • Yiyipo nipasẹ awọn ipa imọlẹ ẹhin nipa lilo Fn + \|.
  • Tí o bá ń lo software, rí i dájú pé àwọn ètò náà wà ní ọ̀nà tó tọ́.

Awọn pato

Image: A low-angle view of the AQIRYS Mira keyboard, highlighting the chassis design and rubber coating.

Alaye atilẹyin ọja

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official AQIRYS website. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

Onibara Support

If you encounter any issues not covered in this manual or require further assistance, please visit the AQIRYS official website for support resources, FAQs, and contact information for customer service. You may also reach out to your retailer for product support.