ENDORFY EY3B003

Ìwé Ìtọ́sọ́nà Olùlò fún Itú Omi Omi ti ENDORFY Navis F360 AIO CPU

Model: EY3B003

Brand: ENDORFY

1. Ifihan

The ENDORFY Navis F360 AIO CPU Water Cooler is designed to provide efficient and quiet cooling for high-performance processors. This all-in-one liquid cooling system features a 360 mm radiator, a PWM-controlled pump, and three Fluctus 120 PWM fans, ensuring optimal thermal management even under demanding conditions. Its user-friendly design facilitates quick and easy installation.

Awọn ẹya pataki:

  • All-in-One (AiO) water cooling with PWM pump control for precise performance.
  • Three pre-installed Fluctus 120 mm fans with an extended speed range for quiet and effective cooling.
  • Kink-resistant rubber hoses for durability and flexible installation.
  • Broad compatibility with the latest AMD and Intel CPU sockets.
  • Thermal compound included for immediate use.
ENDORFY Navis F360 AIO cooler installed in a PC case, highlighting top performance.

The Navis F360 provides top-notch cooling performance for your CPU.

Close-up of ENDORFY Fluctus fans with serrated edges.

Pre-installed Fluctus fans with serrated edges ensure quiet operation.

Close-up of the ENDORFY Navis F360 pump block, indicating PWM control.

The PWM-controlled pump block ensures efficient cooling under load.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn paati ti a ṣe akojọ si isalẹ wa ninu package rẹ ṣaaju ki o to tẹsiwaju pẹlu fifi sori ẹrọ.

  • ENDORFY Navis F360 AIO CPU Water Cooler (Radiator with integrated pump/water block and pre-attached tubes)
  • 3x Fluctus 120 PWM Fans (pre-installed on radiator)
  • Mounting Hardware Kit for Intel and AMD sockets
  • Pactum PT-3 Thermal Compound (syringe)
  • Itọsọna fifi sori ẹrọ / Itọsọna olumulo
Main components of the ENDORFY Navis F360 AIO cooler: radiator with three fans, pump/water block, and connecting tubes.

The core components of the Navis F360 AIO cooler.

Pactum PT-3 thermal compound syringe and spreader tool.

Included Pactum PT-3 thermal compound for CPU installation.

3. Eto ati fifi sori

The ENDORFY Navis F360 features a redesigned mounting system for fast and convenient assembly. Ensure your system is powered off and unplugged before beginning installation.

Ibamu:

This cooler is compatible with a wide range of modern CPU sockets:

  • Àwọn Socket Intel: LGA 1700, LGA 1200, LGA 115x (1150, 1151, 1155, 1156)
  • Àwọn ihò ìtẹ̀wé AMD: AM5, AM4

Awọn igbesẹ fifi sori ẹrọ gbogbogbo:

  1. Prepare your motherboard by installing the correct backplate and standoffs for your CPU socket type.
  2. Apply the included thermal compound to the center of your CPU's integrated heat spreader (IHS).
  3. Carefully place the pump/water block onto the CPU, aligning it with the mounting holes. Secure it with the appropriate screws.
  4. Mount the 360mm radiator with the pre-installed fans to an available fan mounting location in your PC case (e.g., front, top).
  5. Connect the pump's PWM cable to the CPU_FAN or AIO_PUMP header on your motherboard.
  6. So awọn okùn afẹfẹ pọ mọ awọn akọle afẹfẹ ti o wa lori modaboudu rẹ tabi oluṣakoso afẹfẹ kan.
  7. Ensure all cables are routed neatly and do not obstruct airflow.
ENDORFY Navis F360 AIO cooler installed inside a PC case, showing the ease of assembly.

The redesigned mounting system facilitates fast assembly.

Omiiran view of the ENDORFY Navis F360 AIO cooler installed in a PC case.

Proper installation ensures optimal cooling performance.

4. Awọn ilana Iṣiṣẹ

Once installed, the ENDORFY Navis F360 operates automatically based on your motherboard's fan and pump control settings. The PWM (Pulse Width Modulation) functionality allows for dynamic adjustment of pump and fan speeds according to CPU temperature, ensuring efficient cooling while minimizing noise.

Fan and Pump Control:

  • The pump and fans are connected via 4-pin PWM connectors.
  • You can configure fan curves and pump speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.
  • For optimal performance and acoustics, it is recommended to set a fan curve that increases fan speed with rising CPU temperatures, and a pump speed that maintains consistent flow.

5. Itọju

Itọju deede ṣe iranlọwọ lati rii daju igbesi aye gigun ati iṣẹ ti o dara julọ ti olutọju omi AIO rẹ.

  • Yiyọ eruku kuro: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Ensure fans are not spinning during cleaning.
  • Àyẹ̀wò Ọpọn Irin: Check the rubber hoses for any signs of kinks, leaks, or damage. While the hoses are kink-resistant, extreme bends should be avoided.
  • Bọ́ǹpù Pọ́ǹpù: Ensure the pump block is securely mounted to the CPU. No user maintenance is required for the sealed liquid loop.
  • Lẹẹ igbona: The included thermal paste is sufficient for several installations. If you ever need to remount the cooler, it is recommended to clean off old thermal paste and apply new paste.

6. Laasigbotitusita

If you encounter issues with your ENDORFY Navis F360, refer to the common problems and solutions below.

Awọn oran ti o wọpọ ati Awọn ojutu:

  • Awọn iwọn otutu Sipiyu ti o ga:
    • Ensure the pump is running and connected to the correct motherboard header (CPU_FAN or AIO_PUMP).
    • Verify that fans are spinning and correctly oriented for airflow (pushing or pulling air through the radiator).
    • Check thermal paste application. Reapply if necessary, ensuring even coverage.
    • Confirm the water block is securely mounted and making good contact with the CPU.
  • Unusual Noise (Gurgling/Bubbling):
    • Small amounts of air trapped in the loop can cause gurgling, especially during initial setup. This often dissipates over time.
    • Ensure the radiator is mounted higher than the pump block if possible, to allow air to collect in the radiator.
    • If noise persists, gently tilt your PC case to help move air bubbles.
  • Awọn onijakidijagan Ko Yiyi:
    • Check fan cable connections to the motherboard or fan controller.
    • Verify fan speed settings in BIOS/UEFI. Ensure they are not set to 0 RPM mode at low temperatures if you expect them to spin constantly.

7. Awọn pato

Ẹya ara ẹrọSipesifikesonu
Nọmba awoṣeEY3B003
Radiator Iwon360 mm
Fan Iru3x Fluctus 120 PWM Fans
Iṣakoso AdaluPWM Controlled
Pump BearingSeramiki
Ibamu Intel SocketsLGA 1700, 1200, 115x
Ni ibamu AMD SocketsAM5, AM4
Awọn iwọn Ọja (L x W x H)1.1" x 9.7" x 6.5" (isunmọ)
Iwọn Nkan3.15 iwon
Ariwo Ipele15 dB (Pump)
Iru Asopọ Agbara4-Pin
Voltage12 Volts
Wattage3 watt
Ọna ItutuOmi
Ohun eloṢiṣu, Irin

8. Atilẹyin ọja ati Support

Alaye Atilẹyin ọja:

The ENDORFY Navis F360 AIO CPU Water Cooler comes with a 3-odun atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Oluranlowo lati tun nkan se:

For further assistance, technical support, or detailed installation guides, please visit the official ENDORFY knowledge base or contact customer service.

Visit ENDORFY Knowledge Base for Model EY3B003

Side of the ENDORFY Navis F360 box showing QR code and support URL.

Ṣayẹwo koodu QR tabi ṣabẹwo si URL fun afikun support.

© 2023 ENDORFY. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.