1. Ifihan
This manual provides detailed instructions for the safe and effective use of WoldoClean Super Glue for Ceramics and Porcelain. This adhesive is formulated for strong, durable bonds on ceramic, porcelain, and earthenware materials, offering resistance to water, high temperatures, chemicals, and UV exposure.
The product is a medium viscosity cyanoacrylate (CA) adhesive, designed for quick curing and clear drying, suitable for repairing items such as vases, coffee cups, pottery, and decorative items.
Image 1: WoldoClean Super Glue for Ceramics and Porcelain 25g bottle.
2. Alaye Aabo
WARNING: BONDS SKIN INSTANTLY. IRRITANT. READ CAUTIONS ON LABEL.
- Olubasọrọ Awọ: Cyanoacrylate adhesives bond skin and eyelids in seconds. In case of skin bonding, do not pull apart. Soak in warm soapy water or use acetone-based nail polish remover. Seek medical attention if irritation persists or if bonding occurs to sensitive areas.
- Olubasọrọ oju: In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek immediate medical attention.
- Ifasimu: Use in a well-ventilated area. Avoid breathing vapors. If inhaled, move to fresh air.
- Gbigbe: Má ṣe jẹ ẹ́. Tí o bá gbé e mì, má ṣe fa ìgbẹ́. Wá ìtọ́jú ìṣègùn lẹ́sẹ̀kẹsẹ̀.
- Ibi ipamọ: Keep out of reach of children and pets. Store upright in a cool, dry place, ideally between 41°F (5°C) and 77°F (25°C).
- Ohun elo Idaabobo Ti ara ẹni: Wear gloves and eye protection during application to prevent accidental contact.
3. Igbaradi
- Awọn oju-aye mimọ: Ensure all surfaces to be bonded are clean, dry, and free from dust, grease, oil, or other contaminants. Use a suitable cleaner if necessary, and allow to dry completely.
- Idanwo Ibamu: Before applying adhesive, test fit the pieces to ensure they align correctly.
- Afẹfẹ: Ṣiṣẹ ni agbegbe ti o ni afẹfẹ daradara.
- Idaabobo: Wear appropriate personal protective equipment, including gloves and safety glasses. Protect your work surface with newspaper or a disposable mat.
4. Eto
- Ṣii igo naa: Twist the cap clockwise until it punctures the seal. Do not squeeze the bottle while opening.
- Nozzle Application: The bottle features a precise application nozzle for controlled dispensing.
Image 2: The secure cap design helps prevent the glue from drying out.
5. Awọn ilana Iṣiṣẹ
- Waye alemora: Apply a small amount of WoldoClean Super Glue to one of the surfaces to be bonded. A single drop is often sufficient for a strong bond. Avoid over-application.
- Join Surfaces: Immediately press the two surfaces together firmly. Hold them in place for a few seconds. The adhesive cures quickly, typically within seconds.
- Akoko Itọju: While initial bond forms rapidly, allow the adhesive to fully cure for at least 24 hours for maximum strength, especially for items that will be exposed to water or stress.
- Excess Glue: If any excess glue squeezes out, wipe it away immediately with a cloth dampened with acetone (nail polish remover) before it cures.
Aworan 3: Example of repairing a ceramic vase with WoldoClean Super Glue, demonstrating a durable bond.
Image 4: WoldoClean Super Glue is suitable for a variety of ceramic and porcelain items, including statues, tiles, bowls, and cups.
6. Itọju
- Ibi ipamọ: After use, ensure the cap is tightly closed to prevent air exposure and drying out. Store the bottle upright in a cool, dry place, away from direct sunlight and heat. Optimal storage temperature is between 41°F (5°C) and 77°F (25°C).
- Fifọ Nozzle: If the nozzle becomes clogged, gently clear it with a pin or a small wire. Do not squeeze the bottle forcefully.
7. Laasigbotitusita
- Skin Bonded: Do not pull apart. Soak the affected area in warm soapy water or use acetone-based nail polish remover. Gently peel apart. Seek medical attention if necessary.
- Adhesion ti ko dara: Ensure surfaces were clean, dry, and free of contaminants. Verify that enough glue was applied and that the pieces were held firmly together for sufficient time. Extreme temperatures or humidity can affect curing.
- Nozzle ti o ni pipade: Use a pin or small wire to clear the nozzle. Do not apply excessive pressure to the bottle.
- Glue Dried in Bottle: Ensure the cap is always tightly sealed after each use and stored upright in a cool, dry place.
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ ọja | WoldoClean Super Glue for Ceramics and Porcelain |
| Nọmba awoṣe | 9913 |
| Iwọn didun | 25g (0.88 iwon) |
| alemora Iru | Cyanoacrylate (CA) |
| Igi iki | Alabọde |
| Àwọ̀ | Transparent, colorless |
| Atako otutu | 239°F to -49°F (115°C to -45°C) |
| Pataki Awọn ẹya ara ẹrọ | Waterproof, high-temperature resistant, chemical resistant, UV resistant, dishwasher safe, no smell |
| Igbesi aye selifu | 1-2 years (when stored properly above 41°F) |
| Ọja Mefa | 4.33 x 1.38 x 0.91 inches (110 x 35 x 25 mm) |
Image 5: The adhesive offers resistance to temperature extremes, water, chemicals, and UV light.
Image 6: Shelf life and product dimensions for WoldoClean Super Glue.
9. Àwọn Ohun Àfikún àti Àtìlẹ́yìn
For further detailed instructions and support, please refer to the official instruction manual PDF:
Download Official Instruction Manual (PDF)
You can also scan the QR code below for direct access to instructions:
Image 7: Scan this QR code for additional instructions.
For product inquiries or technical assistance, please contact WoldoClean customer support through their official channels.