1. Ifihan
The TASCAM DR-70D is a 4-channel portable audio recorder designed for videographers and filmmakers. It provides high-quality multi-track recording capabilities in a compact form factor, suitable for mounting on or below a camera. This manual provides detailed instructions for the setup, operation, and maintenance of your DR-70D unit and the included AK-DR70C accessory kit.
Image 1.1: The TASCAM DR-70D 4-Channel Audio Recorder, designed for DSLR cameras.
2. Alaye Aabo
Please read and understand all safety precautions before using this product. Retain this manual for future reference.
- Orisun Agbara: Use only the specified power adapter or batteries. Ensure correct battery polarity when inserting.
- Omi ati Ọrinrin: Do not expose the unit to rain, moisture, or liquids. Avoid using near water sources.
- Afẹfẹ: Ma ṣe dina awọn ṣiṣi atẹgun. Rii daju pe sisan afẹfẹ to peye ni ayika ẹyọ naa.
- Ooru: Jeki ẹyọ kuro lati awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran ti o nmu ooru jade.
- Ninu: Aṣọ gbígbẹ nìkan ni kí o fi fọ. Má ṣe lo àwọn ohun ìfọṣọ omi tàbí aerosol.
- Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
- Idasonu: Sọ awọn batiri ati awọn paati itanna nù ni ibamu si awọn ilana agbegbe.
3. Package Awọn akoonu
Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- TASCAM DR-70D 4-Channel Portable Audio Recorder
- TASCAM AK-DR70C Accessory Kit, including:
- Fuzzy Windscreen
- Shock-absorbing Shoe Mount Adapter
- Two 3.5mm Stereo Cables
- Okun USB
- Iwe afọwọkọ eni (iwe yii)
Image 3.1: The TASCAM AK-DR70C Accessory Kit, including a fuzzy windscreen, two 3.5mm stereo cables, and a shoe mount adapter.
4. Ọja Ipariview
4.1. Awọn iṣakoso nronu iwaju ati Ifihan
The front panel of the DR-70D features the main display, input level controls, and recording buttons.
Aworan 4.1: Iwaju view of the TASCAM DR-70D, showing the LCD screen, input gain knobs, and recording controls.
- Ifihan LCD: Shows recording levels, time, battery status, and menu options.
- Bọtini MENU: Accesses the system settings and recording parameters.
- DATA Knob: Navigates menus and adjusts values. Press to confirm selections.
- Input Gain Knobs (1/L, 2/R, 3/L, 4/R): Adjusts the input level for each of the four channels.
- PEAK Indicators: Imọlẹ nigbati ifihan agbara titẹ sii ba ga ju, nfihan gige gige ti o pọju.
- Bọtini REC: Starts and stops recording.
- DUAL REC Indicator: Lights up when Dual Recording mode is active.
- SLATE Button: Generates a slate tone for easy audio/video synchronization.
4.2. Side Panels (Inputs/Outputs)
The DR-70D features various input and output ports for versatile connectivity.
Aworan 4.2: Apa views of the TASCAM DR-70D, illustrating the XLR/TRS inputs on one side and the camera input/output, headphone jack, and remote port on the other.
- XLR/TRS Inputs (1-4): Four balanced inputs with phantom power (24V/48V) for connecting professional microphones.
- EXT IN 1/2: External input for connecting additional devices.
- REMOTE Port: For connecting an optional remote control.
- IN-●-OUT (Camera Input/Output): 3.5mm stereo mini-jack for connecting to a DSLR camera. The input allows monitoring camera audio, and the output sends the DR-70D's mix to the camera.
- Awọn foonu Jack: 3.5mm stereo headphone output for monitoring audio.
- ILA OUT: Stereo line output for connecting to external mixers or other audio devices.
- Ibudo USB: For data transfer and firmware updates.
4.3. Built-in Microphones
The DR-70D includes two built-in omnidirectional microphones for capturing ambient sound or quick stereo recordings without external mics.
Image 4.3: The TASCAM DR-70D mounted on a DSLR camera, with indicators pointing to the built-in omnidirectional microphones (Mic 1 and Mic 2).
4.4. iṣagbesori Aw
The compact design allows for versatile mounting options, including above or below a camera, or on a tripod.
Image 4.4: The TASCAM DR-70D showcasing its compact and robust design, suitable for various mounting configurations.
- Tripod Threads: Located on the bottom for mounting on tripods or follow-focus cages.
- Gbé Bàtà Gbóná Sókò: The optional AK-DR70C adapter allows mounting the DR-70D on a camera's hot shoe.
5. Eto
5.1. Fifi agbara fun Unit naa
The DR-70D can be powered by AA batteries (x4), a USB power bank, or an optional AC adapter.
- Fifi sori batiri: Open the battery compartment on the rear of the unit and insert four AA batteries, observing correct polarity.
- Agbara agbara USB: Connect a USB power bank to the USB port for extended operation.
5.2. Fi kaadi SD sii
The DR-70D records to SD, SDHC, or SDXC cards (up to 128GB).
- Locate the SD card slot on the side of the unit.
- Insert the SD card until it clicks into place. To remove, push the card in again until it springs out.
5.3. Nsopọ Microphones
Connect your microphones to the XLR/TRS inputs (1-4) or use the built-in microphones.
- For condenser microphones requiring phantom power, enable 24V or 48V phantom power in the menu settings for the respective input channels.
- The 3.5mm stereo mini jack input (EXT IN 1/2) supports standard video camera mics with plug-in power.
5.4. Iṣagbesori lori Kamẹra
To mount the DR-70D on a DSLR camera:
- Attach the shock-absorbing shoe mount adapter (from AK-DR70C) to the bottom of the DR-70D.
- Slide the adapter into your camera's hot shoe.
Image 5.1: The TASCAM DR-70D mounted on a DSLR camera, demonstrating a typical setup for videography.
5.5. Connecting to DSLR (Input/Output)
Use the provided 3.5mm stereo cables to connect the DR-70D to your DSLR camera.
- Connect the DR-70D's ILA LATI to your camera's audio input for recording the mixed audio directly to your camera.
- Connect your camera's audio output to the DR-70D's IN-●-OUT (Camera Input) to monitor the camera's audio through the DR-70D's headphone jack.
Image 5.2: Close-up of the TASCAM DR-70D's camera input jack, used for monitoring audio from the camera.
Image 5.3: Close-up of the TASCAM DR-70D's camera output jack, used for sending the recorder's audio mix to the camera.
6. Awọn ilana Iṣiṣẹ
6.1. Ipilẹ Gbigbasilẹ
- Power on the DR-70D.
- Connect your microphones and set input levels (see 6.2).
- Tẹ awọn REC button once to enter record-ready mode.
- Tẹ awọn REC button again to start recording. The REC indicator will light up.
- Lati da gbigbasilẹ duro, tẹ bọtini naa REC bọtini.
6.2. Ṣíṣe àtúnṣe Ipele Ìtẹ̀síwájú
Adjust the input gain for each channel using the dedicated knobs on the front panel. Aim for levels that peak around -6dB to -12dB on the meter to avoid clipping.
- Ti o ba ti TETE indicator lights up frequently, reduce the input gain.
- The DR-70D features high-quality HDDA mic preamps with up to 64dB of gain.
Image 6.1: The TASCAM DR-70D features Ultra High Definition Discrete Architecture (HDDA) mic preamps for clear audio capture.
6.3. Awọn ọna Gbigbasilẹ
The DR-70D offers multiple recording modes to suit different scenarios:
- MONO/MÉJÌ MONO: Ideal for recording a single performer. Dual Mono records a safety track at a lower level.
- Sitẹrio/Ẹlẹ́tọ́ọ̀nù Méjì: Best for recording with the built-in microphones or an external stereo mic. Dual Stereo records a safety track.
- 2MIX/DUAL 2MIX: Creates stereo files from two or more mixed inputs. Dual 2MIX creates a backup track at up to 12dB lower levels to prevent distortion.
Image 6.2: Illustration of the DR-70D in MONO/DUAL MONO recording mode, suitable for single-source audio.
Image 6.3: Illustration of the DR-70D in STEREO/DUAL STEREO recording mode, for stereo sound capture.
Image 6.4: Illustration of the DR-70D in 2MIX/DUAL 2MIX recording mode, showing a setup with multiple microphones.
6.4. Lilo ohun elo adapọ inu
The DR-70D includes a built-in mixer for its four inputs, allowing for individual recording and stereo mixing. Access mixer functions via the MENU button.
Image 6.5: The TASCAM DR-70D's display showing the built-in mixer interface with four inputs and two outputs.
- Akara: Adjusts the stereo position of each input.
- Opin: Prevents input signals from exceeding a set level, reducing distortion.
- Ajọ-Kekere: Reduces unwanted low-frequency noise (e.g., wind, rumble).
- Mid-Side Decoding: For use with Mid-Side microphone configurations.
6.5. Slate Tone Generator
The slate tone generator produces reference tones to simplify audio/video alignment in post-production.
- Tẹ mọlẹ SLATE button to generate a tone manually.
- Slate tones can also be set to generate automatically at the start and/or end of recordings via the menu.
Image 6.6: Close-up of the TASCAM DR-70D's SLATE button, used for generating alignment tones.
6.6. Abojuto Audio
So olokun si awọn FOONU jack to monitor your audio during recording and playback. Adjust headphone volume using the dedicated knob.
6.7. Sisisẹsẹhin
Use the transport controls (Play, Stop, Fast Forward, Rewind) on the front panel to review awọn igbasilẹ rẹ.
7. Itọju
- Ninu: Mu ese kuro pẹlu asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
- Ibi ipamọ: Store the DR-70D in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Awọn imudojuiwọn famuwia: Ṣayẹwo TASCAM website periodically for firmware updates to ensure optimal performance.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni agbara lori. | Dead batteries; incorrect battery insertion; no power source. | Replace batteries; check battery polarity; connect USB power or AC adapter. |
| Kò sí ohùn tí a gbà sílẹ̀. | Microphones not connected; input gain too low; phantom power off for condenser mics; incorrect recording mode. | Check mic connections; increase input gain; enable phantom power; verify recording mode settings. |
| Ohun ti o daru. | Input gain too high; limiter off. | Reduce input gain; enable limiter. |
| Aṣiṣe kaadi SD. | Card not inserted correctly; incompatible card; card full; card corrupted. | Reinsert card; use compatible SD/SDHC/SDXC card; delete files or use new card; format card (will erase data). |
| No headphone output. | Headphone volume too low; headphones not connected; incorrect monitoring source. | Increase headphone volume; check headphone connection; select correct monitoring source in menu. |
9. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Tascam |
| Awoṣe | DR-70D |
| Ni wiwo Hardware | Kaadi Digital to ni aabo |
| Gbohungbo Fọọmù ifosiwewe | Built-In, Lavalier, Shotgun (via inputs) |
| Ohun kika | WAV |
| Awọn agbekọri Jack | 3.5 milimita |
| Digital Gbigbasilẹ Time | Up to 120 hours (depending on card size and settings) |
| Ipo Isẹ gbohungbohun | Stereo (built-in mics) |
| Awọn igbewọle | 4 x XLR/TRS combo, 1 x 3.5mm stereo mini-jack (EXT IN 1/2) |
| Awọn abajade | 1 x 3.5mm stereo mini-jack (LINE OUT), 1 x 3.5mm stereo mini-jack (PHONES) |
| Phantom Agbara | 24V/48V selectable |
| Media Ibi ipamọ | SD card (64MB to 2GB), SDHC card (4GB to 32GB), SDXC card (48GB to 128GB) |
10. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official TASCAM webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
- Awọn orisun Ayelujara: The TASCAM website provides FAQs, driver downloads, and additional support documentation.
- Olubasọrọ Support: Contact TASCAM customer service for assistance with product issues or repairs.