Edifier CX7 Active 2.1 Home Idanilaraya System olumulo Afowoyi

Ọrọ Iṣaaju

The Edifier CX7 is an active 2.1 home entertainment system designed to deliver high-quality audio for various devices, including televisions, personal computers, and notebooks. This system features Bluetooth V5.0 connectivity, an 8-inch subwoofer, and an infrared remote control for convenient operation. This manual provides essential information for setting up, operating, and maintaining your CX7 system.

Package Awọn akoonu

Figure 1: Edifier CX7 System Components

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• Subwoofer (1)
• Satellite Speakers (2)
• Control Unit (1)
• Infrared Remote Control (1)
• 3.5mm to RCA Audio Cable (1)
• RCA to RCA Audio Cable (1)
• Speaker Connection Cables (2)
• Ilana olumulo (1)

Eto Itọsọna

1. Ifiweranṣẹ

Position the subwoofer on the floor, preferably in a corner or near a wall for optimal bass response. Place the satellite speakers on either side of your listening area, equidistant from the listener, and at ear level if possible. Ensure the control unit is easily accessible.

Figure 2: Recommended System Placement

2. Nsopọ Agbọrọsọ

Connect the satellite speakers to the speaker output terminals on the rear of the control unit using the provided speaker cables. Ensure correct polarity (red to red, black to black) for each speaker.

olusin 3: Agbọrọsọ Awọn isopọ

3. Nsopọ Awọn orisun Audio

The CX7 system supports multiple audio input options:

• Iṣawọle AUX: Use the 3.5mm to RCA audio cable to connect devices like smartphones, tablets, or computers to the AUX input on the control unit.
• Iṣawọle PC: Use the RCA to RCA audio cable to connect your PC's audio output to the PC input on the control unit.
• Bluetooth: For wireless connection, refer to the "Bluetooth Pairing" section under Operating Instructions.

4. Asopọ agbara

Connect the power cable to the control unit and then plug it into a standard wall outlet. Turn on the power switch located on the rear of the control unit.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Paa

After connecting the power, press the power button on the control unit or the remote control to turn the system on or off. The display on the control unit will illuminate when powered on.

Figure 4: Control Unit Display

2. Aṣayan Input

Press the "INPUT" button on the control unit or the remote control to cycle through available audio sources: AUX, PC, and Bluetooth. The selected input will be displayed on the control unit's screen.

Figure 5: Control Knob and Input Buttons

3. Iṣakoso iwọn didun

Rotate the large knob on the control unit clockwise to increase volume and counter-clockwise to decrease it. Alternatively, use the "VOL+" and "VOL-" buttons on the remote control.

4. Ṣíṣe àtúnṣe sí ìpele baasi àti ìtẹ̀síwájú

Press the "BASS" or "TRE" (Treble) buttons on the control unit or remote control, then rotate the main knob to adjust the respective levels. The display will show the current bass/treble setting.

5. Sisopọ Bluetooth

1. Select the Bluetooth input on the CX7 system. The display will show "BT" and flash, indicating it's in pairing mode.
2. Lori ẹrọ rẹ (foonuiyara, tabulẹti, ati bẹbẹ lọ), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
3. Select "EDIFIER CX7" from the list of found devices.
4. Once paired, the "BT" indicator on the CX7 display will stop flashing and remain solid.

To disconnect a Bluetooth device, press and hold the "FUNC" button on the control unit or the Bluetooth button on the remote control for a few seconds.

6. Awọn iṣẹ Iṣakoso latọna jijin

Figure 6: Infrared Remote Control

The remote control provides convenient access to all major functions:

• Agbara: Tan-an/pa eto naa.
• Aṣayan igbewọle: Cycles through AUX, PC, Bluetooth.
• Iwọn didun: Ṣe atunṣe iwọn didun titunto si.
• Bass/Treble: Ṣe atunṣe baasi ati awọn ipele tirẹble.
• Pa ẹnu mọ́: Mutes/mu ohun silẹ.
• Awọn idari Sisisẹsẹhin: Play/Pause, Previous/Next track (for Bluetooth mode).

Itoju

• Ninu: Use a soft, dry cloth to clean the surfaces of the speakers and control unit. Do not use liquid cleaners or abrasive materials.
• Afẹfẹ: Ensure adequate ventilation around the control unit and subwoofer to prevent overheating. Do not block ventilation openings.
• Ayika: Avoid exposing the system to extreme temperatures, humidity, dust, or direct sunlight.
• Agbara Pa: If the system will not be used for an extended period, disconnect it from the power outlet.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Edifier webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.

Edifier Official Webojula: www.edifier.com