1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your MokerLink Outdoor 10 Port Gigabit PoE Switch. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.
Image 1.1: The MokerLink Outdoor 10 Port Gigabit PoE Switch, designed for outdoor use, shown connected to surveillance cameras. It features full Gigabit ports, IEEE802.3af/at support, plug & play functionality, SFP fiber connectivity, wall/pole installation options, and waterproof design.
2. Awọn ẹya Ọja
- Àwọn Ibudo Gigabit 10: Equipped with 8 Gigabit PoE ports and 2 Gigabit SFP ports, all supporting 1000Mbps data rates for high-performance data exchange. The 2 SFP ports (modules not included) allow for optical fiber connections, suitable for long-distance outdoor transmission.
- IEEE802.3af/at PoE Support: Features a built-in power supply with a maximum output of 96W. Ports 1-8 support IEEE 802.3af/at standards, providing up to 30W per port. Note: This switch does not support passive 24V PoE.
- Plug & Play Operation: Includes a power cord with a wiring terminal for direct connection to the switch's power input, designed with anti-reverse connection protection. Network cables connect directly to PoE devices, with automatic detection, requiring no configuration.
- Apẹrẹ ti ko ni oju ojo ni ita gbangba: Constructed with an industrial-grade ABS polymer material shell. All power and cable interfaces are protected within the shell, offering enhanced waterproof, dustproof, and snowproof capabilities, making it suitable for outdoor environments and complex indoor settings like warehouses or attics.
- Fifi sori ẹrọ Rọ: LED indicator lights on the front panel provide clear operational status. Pendants on the back support both wall and pole mounting options.
Image 2.1: Diagram showing the PoE+ IEEE802.3af/at compliance, automatically detecting and providing power to devices. It highlights 30W per PoE port, a 96W total power budget, and 48V PoE port output voltage, connecting to IP cameras, wireless APs, and IP phones, while also showing non-PoE devices like routers and computers.
Image 2.2: Illustration of the weather-resistant capabilities of the PoE switch, including lightning protection, dustproof design, IP65 waterproof rating, and resilience against sun exposure and snow, making it suitable for various outdoor conditions.
3. Package Awọn akoonu
Daju pe gbogbo awọn ohun ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ. Ti awọn ohun kan ba nsọnu tabi bajẹ, jọwọ kan si atilẹyin alabara.
- MokerLink Outdoor PoE Switch x 1
- Power Cable with Terminal x 1
- Ilana olumulo x 1
- Odi Oke Kit x 1
Image 3.1: The complete package contents, showing the MokerLink Ethernet Switch, power cable with terminal, user manual, and wall mount kit.
4. Eto ati fifi sori
4.1 iṣagbesori Aw
The switch supports both wall and pole mounting. Choose the appropriate method for your installation environment.
Image 4.1: Illustration of the flexible mounting options, demonstrating how the switch can be installed on a wall or a pole using the provided mounting kit.
4.2 Asopọ agbara
Connect the provided power cable to the terminal block connector on the switch. Ensure correct polarity (L, N, Ground) and secure the connections. The wire gauge for the terminal block should be in the range of 12-24 AWG.
4.3 Awọn isopọ nẹtiwọki
Connect your network devices (e.g., IP cameras, wireless access points) to the 8 Gigabit PoE RJ45 ports (1-8). For uplink or long-distance connections, use the 2 Gigabit SFP ports (SFP modules not included).
Aworan 4.2: alaye view of the switch's ports, including 8 x 10/100/1000 Mbps RJ45 Ethernet Ports and 2 x 1Gbps SFP Ports. The terminal block connector for power input is also shown with its wiring diagram (L, NC, N, NC, Ground) and recommended wire gauge (12-24 AWG).
5. Awọn ilana Iṣiṣẹ
5.1 Agbara Lori
Once all connections are secure, apply power to the switch. The switch will automatically detect and power connected PoE devices.
5.2 LED Atọka
The front panel features LED indicators to display the operating status of the switch:
- PWR (Power indicator):
- Lori: Agbara lori
- Paa: Agbara ni pipa
- Link/Act indicator (1-10):
- On: Link connection normal
- Paa: Ọna asopọ kuro
- Imọlẹ: Gbigbe data
- PoE Indicator (1-8):
- On: Power device connected
- Off: No powered or no PoE device
Image 5.1: A close-up of the LED indicator panel on the MokerLink switch, showing PWR, Link, and PoE status lights for each port.
6. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | MokerLink |
| Nọmba awoṣe | POE-G082GSO |
| Nọmba ti Ports | 10 (8 Gigabit PoE, 2 Gigabit SFP) |
| Poe Standard | IEEE 802.3af / ni |
| O pọju agbara wu | 96 Wattis (Lapapọ) |
| Power Per PoE Port | O to 30 Wattis |
| Data Gbigbe Oṣuwọn | 1000 Megabits fun iṣẹju keji (Gigabit) |
| Ni wiwo | PoE, SFP |
| Voltage | 24 Volts (Input, via terminal block) |
| Awọn iwọn otutu ti nṣiṣẹ | Titi di iwọn 60 Celsius |
| IP Rating | IP65 Weatherproof |
| Case Material Type | Industrial Grade ABS Polymer |
| Iwọn Nkan | 1.58 kilo |
| Yipada Iru | Tọju ati siwaju |
7. Laasigbotitusita
- Ko si Agbara: Ensure the power cable is correctly connected to the terminal block and the power source. Check the PWR LED indicator. If it's off, verify the power supply.
- Ko si Ọna asopọ/Iṣe: If the Link/Act LED is off for a connected device, check the network cable connection at both ends. Ensure the connected device is powered on and functioning correctly. Try a different cable or port.
- Ẹrọ PoE Ko Ṣiṣẹ Lori: Check the PoE Indicator for the specific port. If it's off, ensure the connected device is a PoE-compatible device (IEEE 802.3af/at). Verify the device's power requirements do not exceed 30W per port or the total 96W budget. This switch does not support passive 24V PoE.
- Iyara Nẹtiwọọki o lọra: Ensure all connected devices and cables support Gigabit Ethernet (1000Mbps). Check for excessive network traffic or faulty cables.
- Asopọmọra Laarin: Check all cable connections for looseness or damage. Ensure the switch is installed in a stable environment and not subject to extreme vibrations.
8. Itọju
- Ninu: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure all ports are free from dust and debris.
- Ayẹwo USB: Regularly inspect all connected network and power cables for signs of wear, damage, or corrosion, especially in outdoor installations. Replace damaged cables immediately.
- Ṣayẹwo Ayika: Ensure the switch's operating environment remains within the specified temperature range (up to 60°C). While weatherproof, avoid prolonged exposure to direct, intense sunlight or extreme weather conditions if possible, to extend product lifespan.
- Awọn imudojuiwọn famuwia: Check the MokerLink official webAaye ayelujara nigbagbogbo fun eyikeyi imudojuiwọn famuwia ti o wa. Tẹle awọn ilana ti a pese pẹlu imudojuiwọn naa pẹlu iṣọra.
9. Atilẹyin ọja ati Support
9.1 atilẹyin ọja Alaye
The MokerLink Outdoor 10 Port Gigabit PoE Switch comes with a 1-odun atilẹyin ọja Láti ọjọ́ tí a rà á. Àtìlẹ́yìn yìí bo àwọn àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ lábẹ́ lílò déédéé. Kò bo ìbàjẹ́ tí ó wáyé nípasẹ̀ àìlòkulò, jàǹbá, àwọn àtúnṣe tí a kò gbà láyè, tàbí àwọn àjálù àdánidá.
9.2 Imọ Support
For technical assistance, troubleshooting, or warranty claims, please contact MokerLink customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (POE-G082GSO) and purchase details ready.