Ọrọ Iṣaaju
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your LEHMANN Hudson High-Pressure Washer. Please read it thoroughly before first use and keep it for future reference.
Awọn Itọsọna Aabo
Gbogbogbo Abo
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, when operating the pressure washer.
- Do not direct the water jet at people, animals, electrical equipment, or the unit itself.
- Rí i dájú pé agbára ìpèsè náà bá àwọn ìlànà tó wà lórí àmì ọjà mu.
- Pa awọn ọmọde ati awọn ohun ọsin kuro ni agbegbe iṣẹ.
- Ge asopọ ipese agbara ṣaaju ṣiṣe eyikeyi itọju tabi mimọ.
Itanna Aabo
- Do not use the pressure washer if the power cord or plug is damaged.
- Avoid using extension cords unless absolutely necessary and ensure they are rated for outdoor use and the appliance's power requirements.
- Never operate the unit with wet hands or while standing in water.
Omi Ipese Abo
- Ensure the water supply is clean and free of debris to prevent damage to the pump.
- Maṣe lo omi gbona ju 60°C (140°F).
- The unit is self-priming, allowing it to draw water from a tank or bucket. Ensure the water source is stable and sufficient.
Ọja Pariview
The LEHMANN Hudson High-Pressure Washer is designed for effective cleaning of various surfaces around your home, garden, and vehicle. It features a powerful motor, an aluminum pump for durability, and a self-priming function for versatile water source options.
Figure 1: LEHMANN Hudson High-Pressure Washer and included accessories, including the main unit, spray gun, various nozzles, high-pressure hose, and detergent tank.
Awọn paati bọtini
- High-Pressure Washer Unit
- Sokiri ibon
- Okun Tita-giga (mita 5)
- Vario Nozzle
- Nogo Turbo
- Foam Dispenser (0.8 liters capacity)
- Omi Inlet Ajọ
- Integrated Hose Reel
olusin 2: Top-isalẹ view highlighting the integrated hose reel and the removable detergent tank for easy access and storage.
Ṣeto
Apejọ
- Yọ gbogbo awọn eroja kuro ki o si rii daju pe ohunkohun ko sọ tabi bajẹ.
- Attach the handle to the main unit if it is not pre-assembled.
- Connect the high-pressure hose to the outlet on the pressure washer unit and to the spray gun. Ensure connections are secure.
- Select the desired nozzle (Vario or Turbo) and attach it to the spray gun.
Figure 3: Demonstrates the process of securely connecting an accessory or hose to the main unit.
Omi Asopọ
The LEHMANN Hudson supports two types of water supply:
- Direct Tap Connection: Connect a standard garden hose to the water inlet of the pressure washer. Ensure the water tap is fully open during operation.
- Self-Priming (Bucket/Tank): For drawing water from a static source like a bucket or tank, ensure the water inlet filter is clean and properly installed. Place the end of the garden hose (connected to the pressure washer) into the water source. The pump will self-prime when the unit is turned on.
Figure 4: Illustration of connecting the pressure washer to a standard water tap and an alternative method of drawing water from a bucket using its self-priming capability.
Asopọ agbara
Plug the power cord into a suitable grounded electrical outlet. Ensure the outlet provides the correct voltage bi pato lori aami ọja.
Awọn ilana Iṣiṣẹ
Bibẹrẹ Unit
- Rii daju pe gbogbo awọn asopọ (omi, okun, agbara) wa ni aabo.
- Tan ipese omi.
- Squeeze the trigger on the spray gun to release any air from the system until a steady stream of water emerges.
- Turn the power switch to the "ON" position. The motor will start.
- Release the trigger to allow the motor to build pressure.
Lilo awọn nozzles
- Vario Nozzle: Adjust the spray pattern from a concentrated jet to a wide fan by twisting the nozzle. Use the concentrated jet for stubborn dirt and the fan spray for general cleaning.
- Turbo Nozzle: Provides a rotating jet for maximum cleaning power on tough stains and large areas. This nozzle can increase pressure up to 240 bar.
olusin 5: A sunmọ-soke view of the high-pressure water jet effectively cleaning a surface, demonstrating the power of the spray.
Using the Foam Dispenser
- Fill the 0.8-liter foam dispenser with appropriate pressure washer detergent.
- Attach the foam dispenser to the spray gun.
- Activate the pressure washer. The unit will mix the detergent with water and apply foam evenly.
- After applying detergent, remove the foam dispenser and rinse the surface with clean water using a standard nozzle.
Figure 6: An individual operating the pressure washer with the foam dispenser, illustrating the application of cleaning foam.
Itoju
Ninu Ajọ Wiwọle Omi
Máa ṣàyẹ̀wò kí o sì máa nu àlẹ̀mọ́ omi tó ń wọlé láti dènà kí àwọn ìdọ̀tí má wọ inú pọ́ọ̀ǹpù náà déédéé.
- Disconnect the water supply and power.
- Unscrew the water inlet connection.
- Yọ àlẹmọ kuro ki o si fi omi ṣan labẹ omi ṣiṣan.
- Reinsert the clean filter and reattach the connection.
Ibi ipamọ
After each use, ensure all water is drained from the pump and hoses to prevent freezing damage in cold weather.
- Pa ẹ̀rọ náà àti omi tó wà níbẹ̀.
- Squeeze the spray gun trigger to release residual pressure.
- Disconnect hoses and drain them.
- Store the unit in a dry, frost-free location.
- Utilize the integrated hose reel for neat storage of the high-pressure hose.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si titẹ tabi titẹ kekere | Insufficient water supply, air in the pump, clogged nozzle, clogged water filter. | Check water supply, bleed air from system (squeeze trigger without power), clean nozzle, clean water inlet filter. |
| Mọto ma duro nigbagbogbo | Overheating, low voltage, extended bypass operation. | Allow unit to cool, check power supply, avoid prolonged bypass (release trigger only when spraying). |
| Omi n jo | Loose connections, damaged O-rings/seals. | Tighten connections, replace damaged O-rings/seals. |
| Ẹka ko bẹrẹ | No power, faulty switch, thermal overload. | Check power connection and outlet, allow unit to cool if overheated. |
Awọn pato
- Awoṣe: LGAPW-1814BPA
- Agbara: 1800 W
- O pọju. Agbara Iṣiṣẹ: Pẹpẹ 145 (2100 PSI)
- Max. Pressure with Turbo Nozzle: Pẹpẹ 240 (3480 PSI)
- Oṣuwọn Sisan: 450 l/wakati (119 GPH)
- Ohun elo fifa: Aluminiomu
- Gigun okun: Mita 5 (ẹsẹ 16.4)
- Agbara Ojò Detergent: 0.8 lita
- Awọn iwọn (L x W x H): 32.1 x 48 x 50 cm (12.6 x 18.9 x 19.7 inches)
- Ìwúwo: 8.2 kg (18.1 lbs)
Figure 7: Technical diagram illustrating key performance metrics such as power consumption (1800W), water flow rate (450 l/h), and maximum pressure (220 bar).
Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact LEHMANN customer service. Contact details may vary by region.
For further assistance, you may visit the official LEHMANN store on Amazon: LEHMANN Store.