ECOELER 6-Inch LED Motion Sensor Ceiling Light

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Alaye Aabo

Jọwọ ṣe akiyesi awọn iṣọra ailewu wọnyi lati yago fun ipalara tabi ibajẹ:

• IKILO: Ewu ti Electric mọnamọna. Ge asopọ agbara ni fiusi tabi fifọ Circuit ṣaaju fifi sori ẹrọ tabi iṣẹ.
• Ọja yii gbọdọ wa ni fifi sori ẹrọ ni ibamu pẹlu koodu fifi sori ẹrọ ti o wulo nipasẹ eniyan ti o faramọ ikole ati iṣẹ ti ọja ati awọn eewu ti o kan.
• Rí i dájú pé gbogbo ìsopọ̀ iná mànàmáná wà ní ààbò kí o sì tẹ̀lé àwọn òfin àti ìlànà agbègbè.
• Má ṣe gbìyànjú láti yí ohun èlò náà padà. Èyíkéyìí àtúnṣe lè sọ àtìlẹ́yìn náà di òfo kí ó sì fa ewu ààbò.
• Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
• Wọ awọn gilaasi ailewu ati awọn ibọwọ lakoko fifi sori ẹrọ.

Ohun ti o wa ninu Apoti

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Motion sensor ceiling light fixture
• Adapta E26 (fun fifi sori agolo ti o wa ninu recessed)
• Ohun elo iṣagbesori (awọn skru, awọn eso waya)
• Ilana Afowoyi (iwe yii)

Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).

Ọja Awọn ẹya ara ẹrọ

The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.

Aworan: Pariview of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.

3CCT Selectable Color Temperature

This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lampiboji. Note: This light is non-dimmable.

Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.

Išipopada Sensọ Išė

The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.

Adijositabulu Time Idaduro

The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.

Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.

Awọn ilana fifi sori ẹrọ

Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.

Image: Installation diagrams for Junction Box and Recessed Can.

Junction Box Installation (3.5 or 4-inch J-Box)

1. Pa a agbara ni Circuit fifọ.
2. Remove the existing fixture from the junction box.
3. Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
4. Secure the fixture to the junction box using the provided screws.
5. Ensure the fixture is flush with the ceiling.
6. Mu agbara pada ki o ṣe idanwo ina.

Recessed Can Installation (5 or 6-inch Can)

1. Pa a agbara ni Circuit fifọ.
2. Tí ó bá yẹ, yọ gílóòbù tó wà tẹ́lẹ̀ kúrò kí o sì gé e kúrò nínú ago tí ó wà nínú rẹ̀.
3. Screw the E26 adapter into the recessed can's socket.
4. Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
5. Attach the spring tabs (if not pre-attached) to the fixture.
6. Gently push the fixture into the recessed can until the spring tabs secure it in place.
7. Mu agbara pada ki o ṣe idanwo ina.

Awọn ilana Iṣiṣẹ

Adjusting Color Temperature (CCT)

Lati yi iwọn otutu awọ pada:

1. Rii daju pe agbara wa ni pipa.
2. Carefully open or remove the lampiboji.
3. Locate the CCT selection switch on the fixture's circuit board.
4. Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
5. So lampiboji labeabo.
6. Mu agbara pada.

Eto Idaduro Time

To adjust the time the light stays on after motion ceases:

1. Rii daju pe agbara wa ni pipa.
2. Carefully open or remove the lampiboji.
3. Locate the time delay switch on the fixture's circuit board.
4. Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
5. So lampiboji labeabo.
6. Mu agbara pada.

Išipopada Sensọ isẹ

The motion sensor operates based on ambient light levels and detected movement:

• Àkókò ọ̀sán: The light will remain OFF even if motion is detected, conserving energy.
• Àyíká Òru/Dúdú: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
• Tiipa aifọwọyi: After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).

Image: Visual guide to motion sensor behavior during day and night.

Itoju

To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:

• Ninu: Ge asopọ agbara ṣaaju ṣiṣe mimọ. Lo asọ, gbẹ, tabi die-die damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Ayewo: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
• Rirọpo Boolubu: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.

Laasigbotitusita

If you encounter issues with your light, refer to the table below for common problems and solutions:

Awọn pato

Atilẹyin ọja ati Support

Alaye Atilẹyin ọja: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.

Atilẹyin Onibara: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.