Sanwa MT-R FH5 Remote Control with RX-493i Receiver User Manual

Ọrọ Iṣaaju

Thank you for choosing the Sanwa MT-R FH5 Remote Control System with the RX-493i Receiver. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new remote control system. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

Awọn iṣọra Aabo: Always operate your RC vehicle in a safe environment, away from people, pets, and obstacles. Ensure all connections are secure and batteries are correctly installed. Disconnect batteries when not in use. Keep the product away from moisture and extreme temperatures.

Ọja Pariview

Sanwa MT-R FH5 Transmitter

The Sanwa MT-R FH5 is a high-performance 2.4 GHz FH5 transmission system remote control designed for RC vehicles. It features a robust design and advanced functionalities for precise control.

• Large LCD display for clear information viewing.
• Supports SSR, SHR, and NOR Modus FH5 transmission systems.
• Mu ohun èlò ìrù tí a so pọ̀ fún gbígbé.
• Internal antenna for a sleek design and improved durability.
• Adjustable brake lever for ergonomic comfort.
• Dust protection box for internal components.
• Operates on 4 AA batteries.
• Iwọn: O fẹrẹ to 363g.

olusin 1: Iwaju view of the Sanwa MT-R FH5 Transmitter, showing the large LCD screen, steering wheel, and throttle/brake trigger.

Sanwa RX-493i Receiver

The RX-493i is a compact 4-channel receiver compatible with the FH5 transmission system, designed for reliable communication with your MT-R FH5 transmitter.

• 2.4 GHz F.H5 (SUR, SSL) communication protocol.
• 4 channels for controlling various functions of your RC vehicle.
• Iwọn titẹ siitage range: 3.7-7.4 V.
• Awọn iwọn: 26 x 23.2 x 14 mm.
• Ìwúwo: Nǹkan bí 6.2 g.
• Note: The indication function is only compatible with the MT-5 transmitter. Code 5 cannot be used with the MT-R.

olusin 2: Top view of the Sanwa RX-493i Receiver, showing the compact size and connection ports.

Ṣeto

1. Battery Installation (MT-R FH5 Transmitter)

1. Locate the battery compartment cover on the bottom of the transmitter.
2. Slide the cover open or remove it according to the markings.
3. Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Rọpo ideri iyẹwu batiri ni aabo.

Figure 3: Illustration of the battery compartment on the Sanwa MT-R FH5, showing correct AA battery placement.

2. Receiver Binding (MT-R FH5 with RX-493i)

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. Rii daju pe o wa ni pipa.
2. Connect the RX-493i receiver to your RC vehicle's power source (e.g., ESC or separate receiver battery).
3. Press and hold the bind button on the RX-493i receiver.
4. While holding the bind button, turn on the power to the receiver. The receiver's LED should flash rapidly.
5. Tu bọtini asopọ naa silẹ.
6. Turn on the MT-R FH5 transmitter.
7. Navigate to the binding menu on the transmitter's LCD display (refer to the "Operating Instructions" section for menu navigation).
8. Initiate the binding process from the transmitter.
9. Once binding is successful, the receiver's LED will illuminate solid green, indicating a stable connection.
10. Turn off both the transmitter and receiver, then power them on again to confirm the binding.

Figure 4: Close-up of the Sanwa RX-493i Receiver, indicating the location of the bind button.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso ipilẹ

• Kẹkẹ irin-ajo: Rotate left or right to control the vehicle's steering.
• Throttle/Brake Trigger: Pull the trigger towards you for acceleration (throttle). Push the trigger away from you for braking or reverse.

LCD Display and Menu Navigation

The large LCD display provides real-time information and access to various settings. Use the navigation buttons (typically a scroll wheel or directional buttons) to move through menus and adjust parameters. Press the 'Enter' or 'Set' button to confirm selections.

Key Functions and Adjustments

The MT-R FH5 offers a wide range of adjustable functions to fine-tune your vehicle's performance. Access these through the main menu on the LCD display.

• Dual Rates (D/R): Adjust the maximum steering or throttle travel.
• Curves (CURVE): Customize the response curve for steering and throttle channels.
• Fail Safe (F/S): Set predetermined positions for channels in case of signal loss.
• Reverse (REV): Change the direction of a servo's movement.
• Sub Trim (SUB-T): Make fine adjustments to the neutral position of a servo.
• Endpoint Adjustment (EPA): Set the maximum travel limits for each servo.
• ABS Brake (ALB): Simulate anti-lock braking by pulsing the brake servo.
• Offset (OFFSET): Adjust the center point of certain functions.
• Throttle Type (TH TYPE): Select different throttle response modes.
• AUX Functions (STEP AUX, POINT AUX, AUX MIX, CODE AUX): Configure auxiliary channels for additional vehicle functions (e.g., lights, gear shifting).
• Four-wheel steering (4WS): Specific settings for vehicles with 4-wheel steering.
• Motor on Axle (MOA): Settings for MOA drive systems.
• Model Selection/Copy/Clear: Manage multiple vehicle profiles.
• Timer Functions (LAP TIMER, INT TIMER, DOWN TIMER): Utilize built-in timers for racing or practice.
• Data Logger (LOGGER): Record telemetry data (if applicable).
• Alert Settings (ALERT SETTING): Configure alarms for low battery, temperature, etc.
• Telemetry Settings (TELEMETRY SETTING): Adjust telemetry data display and logging.
• Key Assignment (KEY ASSIGN SW, KEY ASSIGN TRIM): Customize the function of various buttons and trims.
• Buzzer (BUZZER): Adjust audible alerts.
• LCD: Adjust display contrast and backlight.
• Calibration (CALIBRATION): Calibrate steering and throttle for optimal response.

Itoju

• Ninu: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or harsh chemicals. Ensure no dust or debris enters the ports or buttons.
• Ibi ipamọ: Store the remote control system in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
• Itọju Batiri: Always use fresh, high-quality AA batteries for the transmitter. If using rechargeable batteries, ensure they are fully charged before use and follow the manufacturer's charging guidelines.

Laasigbotitusita

• No Power to Transmitter:
  • Ṣayẹwo boya awọn batiri ti fi sori ẹrọ daradara pẹlu polarity to dara.
  • Rọpo pẹlu awọn batiri tuntun.
• No Control/Signal Loss:
  • Ensure the transmitter and receiver are properly bound. Re-bind if necessary.
  • Check receiver power supply.
  • Verify transmitter battery level.
  • Rí i dájú pé kò sí àwọn orísun ìdènà tó lágbára nítòsí.
• Erratic Servo Movement:
  • Check all servo connections to the receiver.
  • Inspect servo wires for damage.
  • Ensure the receiver is securely mounted and free from vibrations.
• Ifihan LCD ko ṣiṣẹ:
  • Check transmitter battery level.
  • Adjust LCD contrast settings in the menu.

Awọn pato

Sanwa MT-R FH5 Transmitter

Sanwa RX-493i Receiver

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Sanwa website. Keep your proof of purchase for warranty claims. Do not attempt to repair the unit yourself, as this may void the warranty.

For further assistance, please contact Sanwa customer service through their official channels.