1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.
Key features of the FSP Dagger Pro 850W SFX Power Supply include:
- ATX 3.1 / PCIe 5.1 Compliance: Equipped with a native 12VHPWR connector and cable, supporting the latest generation hardware power demands.
- Apẹrẹ Modulu ni kikun: Allows for connecting only necessary cables, improving airflow and reducing cable clutter within compact PC builds.
- Compact SFX Form Factor: Compatible with most Mini-ITX and Micro ATX cases, ideal for small form factor PCs.
- 80 PLUS Gold Certified Efficiency: Achieves over 90% efficiency at typical loads, contributing to lower power consumption, reduced heat output, and quieter operation.
- Single +12V Rail Design: Provides full power to VGA cards individually, preventing overloading conditions.
Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.
2. Alaye Aabo
WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.
- Máa yọ okùn agbára kúrò nínú ihò ògiri kí o tó fi sori ẹ̀rọ, yọ kúrò, tàbí nu ìpèsè agbára náà.
- Ma ṣe ṣii ẹrọ ipese agbara. Iwọn gigatages wa ni inu, ati pe ko si awọn ẹya iṣẹ olumulo. Ṣiṣii ẹrọ naa yoo sọ atilẹyin ọja di ofo.
- Ensure the power supply is installed in a well-ventilated area. Do not block any ventilation openings.
- Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
- This product is designed for use in computer systems. Do not use it for any other purpose.
- Pa ipese agbara mọ kuro ninu omi, ọrinrin, ati awọn iwọn otutu to lagbara.
3. Package Awọn akoonu
Jẹrisi pe package rẹ ni awọn nkan wọnyi ninu:
- FSP Dagger Pro 850W SFX Power Supply Unit
- Modular Cable Set (including 12VHPWR, Motherboard 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral)
- AC Agbara okun
- Iṣagbesori skru
- Afowoyi Olumulo (iwe-ipamọ yii)
Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.
4. Eto ati fifi sori
Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.
4.1. Fifi sori ti ara
- Ṣeto eto rẹ: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
- Yọ PSU atijọ kuro (ti o ba wulo): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
- Gbe PSU tuntun naa: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.
Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.
4.2. USB Awọn isopọ
The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.
Aworan 4.2: alaye view of the modular cable connection panel on the PSU.
- Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
- CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
- PCIe Power (6+2-pin or 12VHPWR):
- For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
- For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.
- Agbara SATA: So awọn okun agbara SATA pọ mọ awọn SSD, HDD, ati awọn awakọ opitika rẹ.
- Peripheral Power (Molex): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
- Iṣakoso USB: Rọ awọn okùn naa ni ọna ti o tọ lati mu afẹfẹ ati ẹwa dara si ninu apo rẹ.
5. Awọn ilana Iṣiṣẹ
Once all components are connected and secured, you can power on your system.
- Sopọ agbara AC: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
- Power On PSU: Flip the power switch on the back of the power supply to the "ON" (I) position.
- Ètò Agbára: Tẹ bọtini agbara lori apoti kọnputa rẹ.
5.1. Fan Operation (Semi-Fanless Mode)
The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.
Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.
6. Itọju
Itọju to dara ṣe idaniloju gigun ati iṣẹ ti o dara julọ ti ipese agbara rẹ.
- Ninu: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Always disconnect the power cord before cleaning.
- Fife ategun: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain good airflow within your computer case to prevent overheating.
- Ayẹwo USB: Nigbakugba ṣayẹwo gbogbo awọn asopọ okun lati rii daju pe wọn wa ni aabo ati ominira lati ibajẹ.
7. Laasigbotitusita
If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| System ko ni agbara lori. |
|
|
| Eto naa n tan ṣugbọn o wa ni pipa lẹsẹkẹsẹ. |
|
|
| Fan ti ko ba nyi. |
|
|
If the problem persists after trying these solutions, please contact FSP customer support.
8. Awọn pato
Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | SFX PSU |
| Nọmba Awoṣe Nkan | SDA2-850-G5 |
| Fọọmù ifosiwewe | SFX |
| Ijade Wattage | 850 Wattis |
| 80 PLUS Ijẹrisi | Wura |
| Iye owo ti ATX | ATX 3.1 |
| PCIe Standard | PCIe 5.1 (with native 12VHPWR) |
| Modularity | Modulu ni kikun |
| Ọna Itutu | Air (92mm fan, semi-fanless) |
| Awọn iwọn Ọja (L x W x H) | 5 x 4 x 2.5 inches (125 x 100 x 63.5 mm) |
| Iwọn Nkan | 4.51 iwon (2.05 kilo) |
| Awọn ẹrọ ibaramu | Kọ̀ǹpútà, kọ̀ǹpútà |
| Olupese | FSP Group U.S.A |
Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.
9. Atilẹyin ọja ati Support
The FSP Dagger Pro 850W SFX Power Supply comes with a 10-odun olupese ká atilẹyin ọja, tí ó ń rí i dájú pé ó ṣeé gbẹ́kẹ̀ lé fún ìgbà pípẹ́ àti àlàáfíà ọkàn. Àtìlẹ́yìn yìí bo àwọn àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ lábẹ́ lílo déédéé.
For technical support, warranty claims, or further assistance, please visit the official FSP webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun ijẹrisi atilẹyin ọja.
FSP Official Webojula: https://www.fsplifestyle.com/