Jectse Digital Voice Recorder Watch User Manual

1. Ifihan

Thank you for choosing the Jectse Digital Voice Recorder Watch. This device is designed for convenient and discreet audio recording, featuring voice activation, noise reduction, and timestamp capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your new voice recorder watch.

2. Ọja Ipariview

Awọn ẹya pataki:

• Voice Activated Recording: Automatically records when sound is detected and pauses when silent, conserving battery and memory.
• Idinku Ariwo: Built-in professional chip for clear audio capture.
• Akokoamp Iṣẹ: Records the exact start and end times of each recording for accurate referencing.
• Batiri gbigba agbara: Integrated 110mAh polymer lithium battery, supports recording while charging.
• Igbesi aye batiri gigun: Up to 20 hours of continuous recording and 30 days of standby time.
• Ibi ipamọ Iranti: 32 GB ti abẹnu iranti.
• Fọọmu Gbigbasilẹ: WAV.
• Awọn ọna kika ṣiṣiṣẹsẹhin: MP3, WMA, WAV.

Awọn akoonu idii:

• 1 x Voice Recorder Watch
• 1 x Okun gbigba agbara
• 1 x Agbo
• 1 x Ilana itọnisọna (iwe yii)
• 1 x Okun Adapta

Image 1: The Jectse Digital Voice Recorder Watch, showcasing its sleek design and the timestamp feature for accurate recording data generation.

Image 2: All items included in the package: the voice recorder watch, charging cable, earphone, and adapter cable.

3. Eto

Gbigba agbara akọkọ:

1. Ṣaaju lilo akọkọ, gba agbara si ẹrọ naa ni kikun.
2. Connect the provided charging cable to the watch's USB port.
3. So opin keji okun gbigba agbara naa sinu adapter agbara USB (ko si ninu rẹ) tabi ibudo USB kọmputa kan.
4. The device will indicate charging status (e.g., an LED light). Allow sufficient time for a full charge.

Aworan 3: alaye view of the USB charging port on the side of the voice recorder watch, with its protective cover open.

Nsopọ si Kọmputa:

Lati gbe igbasilẹ files or set the timestamp, connect the watch to your computer using the provided USB cable. The device will appear as a removable storage drive.

4. Awọn ilana Iṣiṣẹ

Titan/Apapa:

• To power on, locate the power button (refer to device diagram if available) and press and hold it until the indicator light activates.
• Lati pa agbara, tẹ mọlẹ bọtini agbara lẹẹkansi titi ina olufihan yoo wa ni pipa.

Gbigbasilẹ:

• Once powered on, the device is typically in standby mode, ready for voice-activated recording.
• When sound is detected, the recorder will automatically begin recording.
• When silence is detected, the recorder will automatically pause, saving memory and battery.
• Recordings are saved as WAV files.

Sisisẹsẹhin:

• Connect the provided earphone to the watch's earphone jack.
• Use the control buttons on the watch (refer to device diagram) to navigate through recordings and initiate playback.
• The device supports MP3, WMA, and WAV playback formats.

Akokoamp Iṣẹ:

The watch automatically embeds a timestamp into each recording, indicating the generation time and end time. To ensure accuracy, synchronize the watch's internal clock by connecting it to a computer. The computer's system time will typically update the device's timestamp.

Charging While Recording:

The device supports recording while connected to a power source, allowing for extended recording sessions.

5. Itọju

• Jeki ẹrọ naa di mimọ nipa fifẹ rẹ pẹlu asọ ti o gbẹ.
• Avoid exposing the watch to extreme temperatures, direct sunlight, or moisture.
• Do not attempt to disassemble the device, as this will void the warranty and may cause damage.
• Tọju ẹrọ naa ni itura, aye gbigbẹ nigbati o ko ba wa ni lilo.

6. Laasigbotitusita

Ẹrọ ti ko tan:

• Rí i dájú pé batiri náà ti gba agbára. So mọ́ orísun agbára kan kí o sì jẹ́ kí ó gba agbára fún o kere ju ìṣẹ́jú 30 lọ.
• Tẹ mọlẹ bọtini agbara ṣinṣin fun iṣẹju diẹ.

Ko le ṣe igbasilẹ:

• Check if the device has sufficient memory. Transfer files to a computer to free up space if needed.
• Ensure the battery is not critically low. Charge the device.

Didara ohun ti ko dara:

• Ensure the recording environment is not excessively noisy.
• Check if the microphone is obstructed.

Akokoamp is incorrect:

• Connect the watch to a computer. The device's internal clock should synchronize with the computer's system time.

7. Awọn pato

8. Atilẹyin ọja ati Support

Specific warranty details for the Jectse Digital Voice Recorder Watch are not provided in this manual. For information regarding warranty coverage, technical support, or service, please refer to the product packaging or contact the manufacturer directly through their official webojula tabi onibara iṣẹ awọn ikanni.