LifePro VibraCare Calf & Foot Massager with Heat

1. Ifihan

Thank you for choosing the LifePro VibraCare Calf & Foot Massager. This device is designed to provide targeted relief and relaxation for your feet and calves. Featuring vibration and acupressure therapy, along with an optional heat function, it aims to reduce joint stiffness, alleviate discomfort, and promote better blood circulation. This manual will guide you through the proper setup, operation, and maintenance of your massager to ensure optimal performance and a soothing experience.

2. Alaye Aabo pataki

Please read all instructions carefully before using the LifePro VibraCare Calf & Foot Massager. Keep this manual for future reference.

• Kan si Onisegun kan: If you have any pre-existing medical conditions, including but not limited to diabetes, neuropathy, heart conditions, or are pregnant, consult your doctor before using this device.
• Kii ṣe fun Lilo iṣoogun: This massager is intended for personal relaxation and comfort only. It is not a medical device and should not be used to diagnose, treat, cure, or prevent any disease or health condition.
• Yago fun Omi: Do not use the massager near water or in damp environments. Do not immerse the device in water.
• Orisun Agbara to dara: Use only the provided AC adapter. Ensure the power outlet matches the voltage pato lori ohun ti nmu badọgba.
• Abojuto: Close supervision is necessary when the massager is used by or near children, invalids, or disabled persons.
• Duro Lilo: If you experience any pain, discomfort, or unusual sensations during use, stop immediately and consult a physician.
• Iṣọra Ooru: The heat function can reach temperatures between 108°-113°F. Individuals with reduced heat sensitivity should use caution. Do not use heat for prolonged periods on one area.
• Mimọ: Always ensure the device is clean and dry before and after each use.

3. Package Awọn akoonu

Upon unpacking your LifePro VibraCare Calf & Foot Massager, please ensure all items listed below are present and in good condition:

• LifePro VibraCare Calf & Foot Massager Unit
• Alailowaya isakoṣo latọna jijin
• Adaparọ Agbara AC
• Itọsọna olumulo
• Ti kii-isokuso Mat

4. Ọja Ipariview

Familiarize yourself with the components of your LifePro VibraCare massager:

• Ẹka akọkọ: The primary device housing the motor, control panel, and foot/calf pads.
• Ibi iwaju alabujuto: Located at the top of the unit, it features buttons for power, mode selection, intensity adjustment, and heat function.
• Foot/Calf Pads: Textured surfaces designed for optimal contact and acupressure points.
• Pẹpẹ Titẹ Ti o le ṣatunṣe: Allows you to change the angle of the massager for comfortable foot or calf positioning.
• Iṣakoso Latọna jijin Alailowaya: Provides convenient access to all functions from a distance.

5. Eto

1. Ibi: Place the massager on a flat, stable surface. For added stability and comfort, use the included non-slip mat underneath the unit.
2. Asopọ agbara: Connect the AC power adapter to the power input port on the massager unit. Plug the other end into a standard electrical outlet.
3. Isakoṣo latọna jijin: Ensure the remote control has batteries installed. If not, open the battery compartment and insert the required batteries (usually AAA, not specified in data, so general advice).
4. Ṣatunṣe Titẹ: The massager features an adjustable tilt bar. You can adjust the angle to suit your preferred massage position for either feet or calves.

6. Awọn ilana Iṣiṣẹ

The LifePro VibraCare offers various programs and intensity levels for a personalized massage experience.

6.1 Ipilẹ isẹ

1. Agbara Tan: Tẹ bọtini agbara (⏻) on the control panel or remote control to turn on the device. The display will illuminate.
2. Yan Eto: Use the 'P' (Program) button on the control panel or the arrow buttons on the remote to cycle through the 5 pre-programmed massage modes (P1-P5) or select a manual mode (HA).
3. Ṣatunṣe Kikan: Use the 'Speed' or arrow buttons on the remote to adjust the vibration intensity. There are 30 intensity levels available.
4. Ṣeto Akoko: The massager typically runs for 15-minute intervals. You can adjust the massage duration using the time setting on the remote control.
5. Mu Ooru ṣiṣẹ: Tẹ bọtini ooru (♨) on the control panel or remote to activate the soothing heat function. Press again to turn off.
6. Agbara Pa: Tẹ bọtini agbara (⏻) again to turn off the massager.

6.2 Massage Positions

• Ifọwọra Ẹsẹ: Sit comfortably and place your bare feet on the textured pads of the massager. Adjust the tilt bar for the most comfortable angle.
• Massage ọmọ malu: For calf relief, you can flip the massager upside down and rest your calves on the vibrating pads. This allows for targeted vibration and acupressure on your calf muscles.

7. Itọju

7.1 Ninu

• Máa yọ ẹ̀rọ ìfọwọ́ra kúrò nínú ibi tí agbára ń gbé jáde kí o tó sọ ọ́ di mímọ́.
• Nu oju ti massager naa pẹlu asọ ti o tutu diẹ damp asọ. Ma ṣe lo awọn afọmọ abrasive, nkanmimu, tabi awọn kẹmika lile.
• Rí i dájú pé omi kankan kò wọ inú ẹ̀rọ náà.
• Allow the massager to dry completely before storing or next use.

7.2 Ibi ipamọ

• Tọju ifọwọra ni itura, aye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.
• Avoid placing heavy objects on the massager during storage.
• Jeki ifọwọra kuro ni arọwọto awọn ọmọde.

8. Laasigbotitusita

If you encounter any issues with your LifePro VibraCare massager, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact LifePro customer support for assistance.

9. Awọn pato

• Orukọ awoṣe: VibraCare Calf & Foot Massager
• Nọmba awoṣe: LP-VBRCP
• Olupese: LifePro
• Orisun Agbara: Corded Electric (AC Adapter)
• Ailokun: Rara
• Ipele Resistance Omi: Ko Omi Resistant
• Heat Option: Yes (108°-113°F)
• Awọn eto: 5 Pre-programmed modes + Manual mode
• Awọn ipele kikankikan: 30
• Iṣiro Ẹka: 1.00 Iṣiro

10. Atilẹyin ọja & Atilẹyin

LifePro is committed to providing high-quality products and excellent customer service. Your LifePro VibraCare Calf & Foot Massager comes with a manufacturer's warranty.

• Alaye Atilẹyin ọja: For detailed information regarding your product's warranty, including coverage and duration, please refer to the warranty card included in your package or visit the official LifePro webojula.
• Atilẹyin Onibara: If you have any questions, require technical assistance, or need to report an issue with your massager, please contact LifePro customer support. You can typically find contact information (phone, email, or support portal) on the LifePro webaaye tabi ninu apoti ọja rẹ.

Please have your model number (LP-VBRCP) and purchase date ready when contacting support to expedite the process.