VANPO 3/8 Inch Drive Adjustable Torque Wrench

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe and effective use of your VANPO 3/8 Inch Drive Adjustable Torque Wrench, Model VP018. This precision tool is designed for accurate torque application in various tasks, including HVAC, automotive, and industrial repairs. Please read this manual thoroughly before operation to ensure proper usage and to prevent damage to the tool or the workpiece.

Alaye Aabo

• Always wear appropriate personal protective equipment, such as safety glasses, when using this tool.
• Rí i dájú pé iṣẹ́ náà wà ní ìpamọ́ kí o tó lo agbára.
• Do not exceed the maximum torque capacity of the wrench (45 Ft.lb / 61 Nm).
• Never use the torque wrench as a breaker bar or for loosening fasteners. It is designed for tightening only.
• Avoid dropping the wrench, as this can affect its calibration and accuracy.
• Keep the wrench clean and free from oil or grease to maintain a secure grip.
• Store the torque wrench in its protective case when not in use, and set it to its lowest torque setting to relieve spring tension.
• Regularly check the wrench for any signs of damage or wear. Do not use a damaged tool.

Ọja Pariview ati irinše

The VANPO VP018 torque wrench features an interchangeable head design, allowing for versatile applications. It comes equipped with both a 38mm adjustable open-end spanner head and a 1/2" 72-tooth ratchet head.

Figure 1: Interchangeable Head Design. This image illustrates the 9x12mm square interface for attaching different heads, such as the ratchet head and the open-end spanner head.

Figure 2: 38mm Adjustable Open End Head. A alaye view of the adjustable open-end head, designed for tightening and loosening nuts and bolts in confined spaces.

The wrench features a dual scale for precise torque settings in both Foot-pounds (Ft.lb) and Newton-meters (Nm). The scale is clearly marked for easy reading and adjustment.

Ṣeto

1. Select the Appropriate Head: Choose between the 38mm adjustable open-end head or the 1/2" ratchet head based on your application.
2. So Ori: Align the chosen head with the 9x12mm square interface on the torque wrench body. Insert the head firmly until it clicks into place. For secure attachment and removal, use a 4mm flat head hex wrench if needed, as indicated in the product features.
3. Set the Torque Value:
   • Locate the locking knob at the base of the handle.
   • Pull down the locking knob and hold it.
   • Rotate the handle to adjust the main scale and the micro-scale until the desired torque value (e.g., 5-45 Ft.lb or 7-61 Nm) is displayed.
   • Release the locking knob. It will automatically rebound to lock the set value. Verify the setting before use.

Figure 3: Two-Way Free Assembly. This image demonstrates how to attach either the open-end head or the ratchet head to the torque wrench body.

Awọn ilana Iṣiṣẹ

1. Prepare the Fastener: Ensure the fastener and mating surfaces are clean and free of debris.
2. Ipo ti Wrench naa: Place the wrench head onto the fastener, ensuring a snug fit. For the open-end head, position it to allow for a full pull. For the ratchet head, ensure the direction switch is set for tightening.
3. Lo Torque: Apply smooth, steady pressure to the handle. Do not jerk or apply sudden force.
4. Listen for the "Click": Continue applying pressure until you feel and hear a distinct "click" from the wrench. This indicates that the preset torque value has been reached.
5. Stop Applying Force: Immediately stop applying force once the "click" is felt/heard. Further tightening can over-torque the fastener and damage the workpiece or the wrench.
6. Tun ti o ba wulo: For critical applications, it is recommended to re-check the torque after a short period, especially if the fastener is new or has been subjected to vibration.

Figure 4: Accuracy and Click Mechanism. This image visually represents the ±3% accuracy and the audible "click" that signals when the preset torque is achieved, indicating to stop applying force.

Awọn ohun elo

The VANPO torque wrench is suitable for a wide range of professional applications, including:

• HVAC and refrigeration systems, especially for mini-split air conditioners.
• Automotive and motorcycle maintenance.
• Industrial repairs involving narrow pipelines or tight spaces.

Figure 5: Diverse Applications. Examples of the torque wrench being used in HVAC installations and automotive engine work.

Figure 6: Versatile Usage. Further illustrations of the torque wrench applied to industrial components and engine parts, highlighting its adaptability.

Itoju

• Ninu: Wipe the wrench clean with a soft, dry cloth after each use. Do not use solvents or harsh chemicals, as these can damage the finish or internal components.
• Ibi ipamọ: Store the torque wrench in its original protective case in a dry, clean environment. Always set the torque to the lowest setting (e.g., 5 Ft.lb or 7 Nm) before storage to relieve tension on the internal spring, which helps maintain accuracy over time.
• Iṣatunṣe: Torque wrenches are precision instruments and require periodic calibration to maintain accuracy. It is recommended to have your wrench calibrated annually or after any significant impact or misuse by a qualified calibration service.
• Ayewo: Before each use, inspect the wrench for any signs of damage, such as cracks, bends, or excessive wear on the heads or handle. Do not use a damaged wrench.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

Your VANPO torque wrench comes with a 12-osu atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.

If you encounter any issues or have questions regarding the operation, maintenance, or warranty of your product, please contact VANPO customer support. For assistance, refer to the contact information provided with your purchase or visit the official VANPO webojula.

Please have your model number (VP018) and purchase details ready when contacting support.