CENTURY AOKE AC 110V Wireless Remote Control Switch User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of the CENTURY AOKE AC 110V Wireless Remote Control Switch. This high-power 315Mhz 30A wireless remote control system is designed for various applications, including motor control, industrial control equipment, and pumps. It offers reliable remote operation through walls, floors, and doors within its effective range.

The product is certified for legality and technical compliance within Japan. The receiver operates on AC 110V and can handle a maximum load current of 30A, ensuring stable control for high-power electrical products.

Ọja Pariview

Image: The complete set of the CENTURY AOKE AC 110V Wireless Remote Control Switch, showing the receiver unit and two remote transmitters.

Aworan: A alaye view of the receiver's terminal block, highlighting the secure screw terminals for electrical connections.

Awọn eroja:

• Receiver (Model: WT-01): The main unit that receives signals from the transmitter and controls the connected device.
• Transmitter (Model: AK-J027): The remote control unit used to send ON/OFF signals to the receiver. Two transmitters are included.

Awọn alaye pataki:

Ṣíṣeto ati Waya

Before connecting the device, ensure the power supply is disconnected to prevent electrical shock. This receiver is designed for AC 110V input and output.

Image: Wiring diagram for the receiver unit. Connect AC 110V to the input terminals (L, N) and your device to the output terminals (L, N).

Awọn itọnisọna wiwọ:

1. Identify the input terminals (marked "IN" with L and N) and output terminals (marked "OUT" with L and N) on the receiver.
2. Connect your AC 110V power supply to the "IN" terminals. Ensure correct polarity (Live to L, Neutral to N).
3. Connect the device you wish to control to the "OUT" terminals. Ensure correct polarity.
4. Secure all wire connections firmly within the terminal block.
5. Once wiring is complete, you may connect the power supply to the receiver.

Awọn ọna ṣiṣe

The receiver supports different operating modes. The default mode is Latch mode, which is set during the learning process.

1. Latch Mode (Default):

In Latch mode, pressing the "ON" button on the transmitter turns the relay ON. The relay remains ON until the "OFF" button on the same transmitter is pressed, which turns the relay OFF.

2. Manual Function:

The receiver also features a manual control button (Learning Button). When the relay is ON, pressing the learning button once will turn the LED indicator ON. Pressing the learning button again will turn the relay OFF, and the LED indicator will also turn OFF. This allows for local control without the remote.

Learning and Clearing Methods

To pair a new transmitter or reset the receiver, follow these steps:

Learning Method (for Latch Mode):

1. Ensure the receiver is powered with AC 110V.
2. Press and hold the learning button on the receiver until the LED indicator blinks once.
3. Release the learning button.
4. Press the learning button once more briefly.
5. Immediately press the "ON" button on your transmitter. The receiver's LED indicator will blink three times.
6. Immediately press the "OFF" button on your transmitter. The receiver's LED indicator will blink three more times.
7. This indicates that the learning process is successful. The transmitter is now paired in Latch mode.

Clearing Method (Resetting Paired Transmitters):

1. Ensure the receiver is powered.
2. Press and hold the learning button on the receiver.
3. Continue holding until the receiver's LED indicator blinks three times and then turns off.
4. Release the learning button. All previously paired transmitters are now cleared from the receiver's memory.

Itoju

To ensure the longevity and proper functioning of your remote control switch, please observe the following maintenance guidelines:

• Keep the receiver and transmitters dry. Moisture can damage electronic components.
• Avoid exposing the devices to extreme temperatures, direct sunlight, or corrosive environments.
• Clean the devices with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure all wiring connections remain secure. Periodically check for loose connections, especially in high-vibration environments.
• Replace the transmitter battery (CR2016) when the remote range decreases or the LED indicator on the transmitter does not light up consistently.

Laasigbotitusita

If you encounter issues with your CENTURY AOKE Wireless Remote Control Switch, refer to the following common problems and solutions:

• Ẹrọ ti ko dahun si latọna jijin:
  • Check if the receiver is properly powered (AC 110V).
  • Ensure the transmitter battery is not depleted. Replace if necessary (CR2016).
  • Verify that the transmitter is paired with the receiver. If not, follow the "Learning Method" instructions.
  • Ensure you are within the effective remote distance (20-30 meters unobstructed). Walls and obstacles can reduce range.
• Iṣiṣẹ lainidii:
  • Check for strong interference from other wireless devices operating on similar frequencies (315MHz).
  • Ṣe àyẹ̀wò àwọn ìsopọ̀ wáyà fún ìfọ́ tàbí ìbàjẹ́.
  • Ensure the receiver is not placed in an enclosed metal box, which can block RF signals.
• LED olugba ko tan ina:
  • Confirm the receiver is receiving power.
  • If the LED does not light up during the learning process, try clearing all codes and re-pairing.
• Output device not turning ON/OFF:
  • Check the wiring to the output device.
  • Ensure the load current of your device does not exceed the maximum 30A rating of the receiver.

Ti iṣoro naa ba wa lẹhin igbiyanju awọn igbesẹ wọnyi, jọwọ kan si atilẹyin alabara.

Package Awọn akoonu

• 2 x Wireless Transmitters (Model: AK-J027)
• 1 x Wireless Receiver (Model: WT-01)

Atilẹyin ọja ati Support

Specific warranty information for this product is not provided in the available documentation. For any technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform.

Manufacturer: CENTURY AOKE