AOLIKES 902035 Battery User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and effective use of your AOLIKES 902035 3.7V 600mAh Lipo Rechargeable Battery Pack. This battery is designed for various portable electronic devices such as Bluetooth speakers, mini DVRs, pet GPS trackers, driving recorders, and dash cams, offering a reliable power source with a JST Ph1.25-2Pin plug.

Alaye Aabo

Please read and understand all safety precautions before using the battery. Failure to follow these instructions may result in fire, electric shock, or injury.

• Má ṣe tú batiri náà ká, fọ́ ọ, gé e lulẹ̀, tàbí kí o fi ẹ̀rọ gé e kúrú.
• Do not expose the battery to high temperatures (above 60°C / 140°F) or direct sunlight.
• Ma ṣe fi batiri bọ inu omi tabi awọn olomi miiran.
• Jeki batiri kuro lati ọdọ awọn ọmọde ati awọn ohun ọsin.
• Use only chargers specifically designed for Lithium-ion batteries.
• Tí bátìrì náà bá fi àmì wíwú, jíjò tàbí ìbàjẹ́ hàn, dáwọ́ lílò rẹ̀ dúró lẹ́sẹ̀kẹsẹ̀ kí o sì sọ ọ́ nù dáadáa.
• Ensure correct polarity when connecting the battery. Incorrect connection can damage the battery and the device.

Ọja Awọn ẹya ara ẹrọ

• 3.7V rechargeable replacement Lithium-ion battery with 600mAh capacity.
• Suitable for various devices including Bluetooth speakers, MP3 players, PDAs, MP4 players, FM radios, wireless Bluetooth headsets, pet GPS, keychain cameras, mini DVRs, and electronic readers.
• Oruko oniwatage 3.7V, fully charged 4.2V, Power 2.22Wh.
• Item model PL902035.
• Built-in battery protection circuit module (PMC) to prevent overdischarge and short circuit.
• Compact size: 1.38 x 0.78 x 0.35 inches max (L*W*T).
• Lightweight: approximately 0.4 oz.
• Equipped with a genuine JST Ph1.25mm, 2-Pin plug connector.

Eto ati fifi sori

Before installing the new battery, carefully observe the polarity of the old battery and the device's connection points. Ensure the new battery's wires are connected correctly to avoid damage.

1. Ṣe idanimọ Polarity: The red wire of the battery is the positive power connection ("+"). The black wire is the negative power connection ("-").
2. Check Device Connection: Before connecting, verify the corresponding positive and negative terminals on your device.
3. So Plug pọ: Carefully insert the JST Ph1.25mm, 2-Pin plug into the matching receptacle on your device. Ensure a secure fit.
4. Iyipada polarity: If the original battery's wiring was reversed compared to the new battery's plug configuration, you may need to interchange the plug wires. This typically involves carefully releasing the pins from the connector housing and reinserting them in the correct orientation. Consult a professional if unsure.

Image: The AOLIKES 902035 battery showing its compact size, the 3.7V 600mAh rating, and the red and black wires leading to the JST Ph1.25-2Pin connector. The positive (+) and negative (-) markings are visible on the battery casing.

Awọn ilana Iṣiṣẹ

Once installed, the battery will power your compatible device. For optimal performance and longevity:

• Idiyele Ibẹrẹ: A ṣe iṣeduro lati gba agbara si batiri ni kikun ṣaaju lilo akọkọ rẹ.
• Gbigba agbara: Use a compatible charger designed for 3.7V Lithium-ion batteries. Do not overcharge or leave charging unattended for extended periods.
• Sisọ silẹ: Avoid completely draining the battery frequently, as this can reduce its lifespan. Recharge when the device indicates low power.
• Iwọn otutu: Operate the battery within recommended temperature ranges (typically 0°C to 45°C for charging, -20°C to 60°C for discharging).

Itoju

Itọju to peye mu ki batiri rẹ pẹ si:

• Ibi ipamọ: If storing the battery for an extended period, charge it to about 50-60% capacity and store it in a cool, dry place away from direct sunlight. Recharge every 3-6 months to prevent deep discharge.
• Ninu: Keep the battery and its connectors clean and free from dust and debris. Use a dry, soft cloth for cleaning.
• Ayewo: Periodically inspect the battery for any physical damage, swelling, or signs of leakage.

Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú batiri rẹ, ronú nípa àwọn nǹkan wọ̀nyí:

• Battery Not Powering Device:
  • Rii daju pe batiri ti gba agbara ni kikun.
  • Verify that the JST connector is securely plugged into the device.
  • Ṣayẹwo Polarity: Double-check that the red wire is connected to the positive terminal and the black wire to the negative terminal of your device. If reversed, carefully correct the wiring (refer to "Setup and Installation" section).
  • Inspect the battery and device for any visible damage.
• Batiri Ko Ngba agbara:
  • Ensure the charger is compatible and functioning correctly.
  • Check the charging port on your device and the battery connector for debris or damage.
  • Confirm the battery is not excessively hot or cold.
• Igbesi aye batiri kukuru:
  • Rii daju pe batiri ti gba agbara ni kikun ṣaaju lilo.
  • Reduce power consumption of the device if possible.
  • Battery capacity naturally degrades over time and with cycles. If significantly reduced, consider replacement.

Awọn pato

Atilẹyin ọja ati Support

For any questions, technical support, or warranty inquiries regarding your AOLIKES 902035 battery, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: AOLIKES

Fun iranlọwọ siwaju sii, o le ṣabẹwo si AOLIKES Store on Amazon.