Jectse Smart RFID NFC Copier User Manual

1. Ifihan

This manual provides detailed instructions for the operation and maintenance of your Jectse Smart RFID NFC Copier. This device is designed for reading, writing, and duplicating various RFID and NFC cards and keyfobs across multiple frequencies. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.

2. Ọja Ipariview

The Jectse Smart RFID NFC Copier is a handheld device featuring a color display and a numeric keypad for easy operation. It supports a wide range of card types and frequencies.

Nọmba 2.1: Jectse Smart RFID NFC Copier. This image shows the front view of the handheld copier with its color screen and keypad.

2.1 Irinše ati idari

Nọmba 2.2: Labeled diagram of the copier's display and controls. Key elements include the display area, power button, OK button, delete button, scan button, read button, write button, mode switch, and input keys.

• Agbegbe Ifihan: Shows card number, operation status, and messages.
• Bọtini agbara: Tan ẹrọ naa tan ati pa.
• Bọtini O dara: Jẹrisi awọn aṣayan tabi awọn iṣe.
• Bọtini C: Deletes input or cancels operations.
• Bọtini SCAN: Initiates automatic scanning for card types.
• Bọtini KA: Reads data from a card.
• Bọ́tìnì KỌ: Writes data to a card.
• Bọtini MODE: Yipada laarin awọn oriṣiriṣi awọn ipo iṣẹ.
• Bọtini INPUT: Allows manual entry of card numbers.
• Bọtini Nọmba (0-9): For entering data.
• Awọn bọtini Itọnisọna: For navigation on the display.

2.2 Package Awọn akoonu

Nọmba 2.3: Included accessories: USB data cable and two blue keyfobs. The package typically includes the copier unit, a USB data cable, and several writable keychains/cards.

• Jectse Smart RFID NFC Copier Unit
• USB Data Cable
• Writable Keychains (Quantity may vary)
• Writable Cards (Quantity may vary)

3. Eto

3.1 Ipese Agbara

The device can be powered in two ways:

Nọmba 3.1: Ẹyìn view of the copier, highlighting the battery slot and card sensing area. The battery compartment is located on the back of the device.

1. Awọn batiri AAA: Open the battery compartment on the back of the device and insert 4 AAA batteries (not included), ensuring correct polarity.
2. Ipese Agbara USB: Connect the device to a computer or a USB power adapter using the provided USB data cable.

Press the power button to turn on the device. The display will light up.

3.2 Connecting to a Computer (for Decryption)

For decrypting certain 13.56MHz encrypted cards, the device must be connected to a computer.

Nọmba 3.2: Connection diagram illustrating the copier connected to a computer via USB, with a representation of the software interface. The USB cable connects the copier to a computer for advanced functions like decryption and software interaction.

1. Connect the USB data cable from the copier to an available USB port on your computer.
2. The device may require specific software for decryption. Refer to the manufacturer's website or included documentation for software installation instructions.

4. Awọn ilana Iṣiṣẹ

4.1 Reading a Card

1. Tan ẹrọ naa.
2. Place the card or keyfob you wish to read on the card sensing area (located on the back of the device, refer to Figure 3.1).
3. Tẹ awọn KA bọtini.
4. The display will show the card number and type if successful.

Nọmba 4.1: Demonstrating how to place a card on the copier for reading. The card is held flat against the back of the device.

Nọmba 4.2: An alternative perspective of placing a card for reading. Ensure the card is positioned correctly over the sensing area.

4.2 Writing/Duplicating a Card

To duplicate a card, you must first read the source card, then write the data to a compatible writable card or keyfob.

1. Follow the steps in Section 4.1 to read the source card. Ensure the card data is displayed on the screen.
2. Remove the source card.
3. Place a compatible writable card or keyfob (e.g., UID keychain, T5577 card) on the card sensing area.
4. Tẹ awọn KỌ bọtini.
5. The display will indicate if the writing process was successful.

Akiyesi: For successful writing, ensure the target card is a writable type (e.g., UID cards for 13.56MHz, T5577 for 125KHz). Standard read-only cards cannot be written to.

4.3 Decrypting Encrypted 13.56MHz Cards

The device can decrypt most 13.56MHz encrypted cards when connected to a computer.

1. Connect the copier to your computer via the USB cable (refer to Section 3.2).
2. Launch the dedicated decryption software on your computer.
3. Follow the software's instructions to initiate the decryption process. This typically involves placing the encrypted card on the copier's sensing area and allowing the software to analyze and decrypt the data.
4. Once decrypted, the software will guide you through writing the decrypted data to a new writable card.

Pataki: Decryption capabilities may vary depending on the encryption complexity and the specific software version. Not all encrypted cards can be decrypted.

4.4 Frequency Support

The copier supports reading and writing across a broad range of frequencies:

• 125 kHz
• 250 kHz
• 375 kHz
• 500 kHz
• 625 kHz
• 750 kHz
• 875 kHz
• 1000 kHz
• 13.56MHz

It is compatible with various card types including ISO 14443 A cards, EM cards, T5577 cards, Ntag 213/215/216, and others.

5. Itọju

• Ninu: Lo asọ asọ ti o gbẹ lati nu ẹrọ naa. Yago fun lilo awọn olutọpa omi tabi awọn ohun elo abrasive.
• Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Rirọpo Batiri: If using AAA batteries, replace all four batteries simultaneously when the low battery indicator appears on the display.
• Awọn imudojuiwọn sọfitiwia: Lorekore ṣayẹwo olupese ká website for any available software or firmware updates for enhanced functionality or compatibility.

6. Laasigbotitusita

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official Jectse webojula tabi kan si alagbata rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.

Manufacturer: Jectse