Jansite AHD 1080P 170° Wide Angle Rear View Kamẹra ọkọ ayọkẹlẹ

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the Jansite AHD 1080P 170° Wide Angle Rear View Car Camera, Model JM-P31-E-EU2. Please read this manual thoroughly before installation and operation to ensure correct usage and optimal performance. This camera is designed to enhance your vehicle's rear visibility, offering a wide-angle view and clear imaging for safer reversing and parking.

Ọja Awọn ẹya ara ẹrọ

• AHD 1080P High-Resolution Imaging: Utilizes a 1-megapixel CCD sensor with 3D noise reduction for clear, sharp, and color-accurate images.
• 170° Fife Viewigun Angle: Ó pèsè agbègbè tó gbòòrò ti view to minimize blind spots, offering a comprehensive perspective behind your vehicle.
• Adjustable Lens & 360° Rotation: The camera lens can be rotated 360° and adjusted by 45° to achieve the optimal viewing angle for any installation position.
• Triple Control Modes: Features selectable video output (AHD 1080P or CVBS), switchable front/rear view, and optional parking guidelines, controlled by cutting specific wires.
• Integrated Step-down Module: Ensures stable power delivery and prevents overheating.
• Double-Shielded Video Cable: Provides stable video signal transmission, reducing interference and delays.
• IP69K Waterproof Rating: Fully sealed design ensures reliable operation in all weather conditions, resistant to water, fog, and extreme temperatures.
• Jakejado Voltage ibamu: Supports 12V-24V vehicle electrical systems.
• Apẹrẹ Iwapọ: Miniaturized form factor for discreet and versatile installation.
• Iran Alẹ: Enhanced low-light performance for clear visibility in dark conditions.

Package Awọn akoonu

Jọwọ ṣayẹwo akoonu ti package nigbati o ba gba:

• Jansite AHD Rear View Camera (Model JM-P31-E-EU2)
• Video Cable (RCA connector)
• Okun agbara
• Mounting Hardware (screws, wrench for adjustment)
• Afowoyi Olumulo (iwe-ipamọ yii)

Alaye Aabo

Tẹle awọn itọnisọna ailewu wọnyi lakoko fifi sori ẹrọ ati iṣẹ:

• Rí i dájú pé a ti ge agbára ọkọ̀ náà kúrò kí a tó fi sori ẹ̀rọ náà láti dènà ìkọlù iná mànàmáná tàbí ìbàjẹ́.
• Route cables carefully to avoid interference with vehicle moving parts, sharp edges, or heat sources.
• Má ṣe dí awakọ̀ náà lọ́wọ́ view or interfere with vehicle safety systems during installation.
• This camera is an aid for reversing and parking; always check your surroundings directly.
• Only use the camera within its specified voltage ibiti (12V-24V).

Fifi sori Itọsọna

Follow these steps for proper installation of your Jansite rear view kamẹra:

1. Aṣayan Ibi Iṣagbesori: Choose a suitable location at the rear of your vehicle that provides an unobstructed view. The camera's mini design allows for versatile surface mounting.
   

   Aworan: Examples of various installation positions for the camera, including normal, horizontal, and upside-down mounting, with real-shot examples.

2. Iṣagbesori to ni aabo: Use the provided screws to firmly attach the camera to the chosen surface.
3. Atunse igun: The camera lens can be rotated 360° and adjusted by 45° up or down. Use the included wrench to fix the lens at the optimal viewigun igun.
   

   Image: The camera's adjustable lens (45° up/down, 360° rotation) and its compact dimensions compared to a 20 Euro cent coin.
4. Asopọmọra:
   • Connect the camera's power cable to your vehicle's reverse light power supply (typically 12V) or a constant 12V-24V power source if using for continuous monitoring.
   • Connect the video cable (RCA connector) from the camera to your compatible display unit (e.g., car stereo, aftermarket LCD/TFT screen).
   • Akiyesi Ibamu Pataki: This camera is compatible ONLY with car stereos, head units, OEM navigation systems, stereo displays, DVD players, or rearview mirror monitors that accept standard RCA input. It is NOT suitable for dash cams or mirror dash cams due to different connector and PIN definitions.
     

     Image: Visual warning about compatibility, showing incompatible dash cams.

Awọn ilana Iṣiṣẹ

The camera features three control modes activated by cutting specific wires on the video cable. Perform these modifications ṣaaju ki o to final installation if needed.

1. Guideline ON/OFF:
   • Aiyipada: Parking guidelines are ON.
   • To turn guidelines OFF: Cut the green wire loop.
2. Video Signal Output (AHD 1080P / CVBS):
   • Aiyipada: AHD 1080P (25FPS). This is suitable for AHD-compatible displays.
   • To switch to CVBS signal: Cut the orange wire loop. CVBS is compatible with most older or non-AHD displays.
3. Iwaju/Tẹhin View Switching (Mirror Image / Positive Image):
   • Aiyipada: Mirror Image (Rear View).
   • To switch to Positive Image (Front View): Cut the white wire loop. This is useful if installing the camera as a front camera.
   

   Image: Illustration of the three control modes activated by cutting specific wires: guideline ON/OFF, AHD 1080P to CVBS signal switching, and mirror image (rear view) to positive image (front view).

4. Awọn Eto Ifihan: After installation, access your display unit's settings to select the correct reversing system (e.g., AHD 1080P 25fps or CVBS) if applicable.
   

   Aworan: Example of a car stereo interface showing settings for reversing system selection, including AHD 720p 25fps and AHD 1080p 25fps.

Itoju

To ensure the longevity and optimal performance of your camera, follow these maintenance tips:

• Ninu: Mọ lẹnsi kamẹra nigbagbogbo pẹlu asọ, damp aṣọ láti rí i dájú pé ó hàn gbangba. Yẹra fún àwọn ohun ìfọṣọ tí a fi ń pa ara.
• Apẹrẹ ti ko ni omi: The camera features an IP69K waterproof rating, making it resistant to high-pressure water jets and submersion. No special waterproofing maintenance is required.
  

  Image: The camera submerged in water, emphasizing its IP69K waterproof rating and robust housing, with examples of use in rain, snow, and desert conditions.
• Ayẹwo USB: Periodically check cables for any signs of wear or damage, especially where they pass through vehicle bodywork.

Laasigbotitusita

Ti o ba pade awọn ọran pẹlu kamẹra rẹ, tọka si awọn iṣoro ati awọn solusan ti o wọpọ wọnyi:

• Ko si aworan lori Ifihan:
  • Check all cable connections (power, video) are secure.
  • Ensure the camera is receiving power (e.g., reverse lights are on).
  • Verify your display unit is set to the correct video input.
  • Confirm the video signal type (AHD/CVBS) matches your display and the camera's wire-cut configuration.
• Fuzzy or Distorted Image:
  • Nu lẹnsi kamẹra nu.
  • Check video cable for damage or kinks.
  • Ensure the video signal type (AHD/CVBS) is correctly configured for your display.
  • Verify the display unit's resolution settings.
• Ti ko tọ View (Mirror/Front):
  • Check the white wire loop on the camera cable. Cut it if you need front view, leave it intact for rear view.
• No Parking Guidelines:
  • Check the green wire loop on the camera cable. Cut it if you want guidelines OFF, leave it intact for guidelines ON.
• Interference/Signal Noise:
  • Ensure the double-shielded video cable is used and routed away from strong electrical interference sources.
  • Verify power connections are stable and free from fluctuations.

Awọn pato

Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Jansite webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.