Lemorele R15 RX Wireless HDMI Extender User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Lemorele R15 RX Wireless HDMI Extender. This device allows for wireless transmission of HDMI video and audio signals over distances up to 656 feet (200 meters), supporting configurations where one transmitter (TX) can be paired with up to four receivers (RXs). It features LoopOutput, KVM functionality, and IR pass-through for enhanced control. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Key Awọn ẹya ara ẹrọ

• Wireless HDMI Extension: Transmits HDMI signals wirelessly up to 656 feet (200 meters).
• Atilẹyin fun Olugba-pupọ: One transmitter (TX) can be paired with up to four receivers (RXs) simultaneously.
• LoopOutput: HDMI output on the transmitter for local monitoring.
• Iṣẹ ṣiṣe KVM: Supports Keyboard, Video, and Mouse extension.
• IR Pass-through: Allows control of the source device from the receiver location.
• 5G Streaming: Utilizes 5G wireless technology for stable video and audio transmission.
• Ibamu gbooro: Compatible with various HDMI source devices and displays including TVs, monitors, projectors, cable boxes, Blu-ray players, gaming consoles (PS5/4/3, Xbox), computers, and laptops.

3. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 1 x HDMI Receiver (RX)
• 2 x Antennae
• 1 x HDMI Okun
• 1 x IR IN Cable
• 1 x Okun Olohun
• 1 x Agbara Adapter
• 1 x Itọsọna olumulo

4. Awọn ilana iṣeto

4.1 Initial Pairing Steps

1. Ensure both the transmitter (TX) and receiver (RX) units are powered off.
2. Connect the HDMI output of the receiver (RX) to the HDMI input of the transmitter (TX) using an HDMI cable. This direct connection is for initial pairing only.
3. Agbara lori mejeeji atagba ati awọn ẹya olugba.
4. Observe the STA (green light) indicator on both the receiver and transmitter. After a few seconds, the STA lights on both units will illuminate steadily, indicating successful pairing.
5. Once paired, disconnect the HDMI cable used for pairing.

4.2 Standard Asopọ

After successful pairing, proceed with the standard connection as follows:

1. Transmitter (TX) Setup:
   • Connect your HDMI source device (e.g., computer, Blu-ray player) to the HDMI IN port of the transmitter using an HDMI cable.
   • (Optional) If local monitoring is desired, connect a display to the HDMI OUT (LoopOutput) port of the transmitter.
   • Connect the power adapter to the transmitter and plug it into a power outlet.
   • Attach the antennae to the transmitter unit.
2. Receiver (RX) Setup:
   • Connect your display device (e.g., TV, monitor, projector) to the HDMI OUT port of the receiver using an HDMI cable.
   • Connect the power adapter to the receiver and plug it into a power outlet.
   • Attach the antennae to the receiver unit.
   • (Optional) For IR pass-through, connect the IR IN cable to the receiver and position the IR emitter near the IR sensor of your source device.
   • (Optional) For KVM functionality, connect your keyboard and mouse to the USB ports on the receiver.

Olusin 1: Example setup demonstrating one transmitter (TX) paired with four receivers (RXs) for multi-display output. The TX unit is connected to a source (not shown) and wirelessly broadcasts to multiple RX units, each connected to a separate display.

4.3 Multi-Receiver Configuration (1 TX to 4 RXs)

The Lemorele R15 RX system supports connecting one transmitter to up to four receivers. Follow the "Initial Pairing Steps" for each receiver you wish to pair with the transmitter. Once all receivers are paired, they will simultaneously receive the signal from the single transmitter.

5. Awọn ilana Iṣiṣẹ

5.1 Agbara Tan / Pa

• To power on, connect the power adapter to the unit and a power outlet. The unit will automatically power on.
• To power off, disconnect the power adapter from the unit.

5.2 Gbigbe Ifihan

Once all connections are made and units are powered on, the transmitter will automatically detect the HDMI input and begin broadcasting the signal. The receivers will automatically detect the wireless signal and display the content on the connected monitors. Ensure that the source device is outputting a compatible HDMI signal.

5.3 Iṣakoso latọna jijin IR

If you have connected the IR IN cable to the receiver and positioned the IR emitter correctly near your source device's IR sensor, you can use your source device's remote control from the receiver location to control the source.

Iṣẹ́ KVM 5.4

For KVM functionality, connect your USB keyboard and mouse to the designated USB ports on the receiver unit. This allows you to control the connected computer (source device) from the receiver location.

6. Itọju

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ẹ̀rọ náà. Má ṣe lo ohun èlò ìfọmọ́ omi tàbí aerosol.
• Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Afẹfẹ: Rii daju pe fentilesonu to dara ni ayika awọn ẹya lati ṣe idiwọ igbona. Ma ṣe dina eyikeyi awọn ṣiṣi atẹgun.
• Mimu: Handle the units with care. Avoid dropping or subjecting them to strong impacts.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

9.1 Atilẹyin ọja

Lemorele offers a one-year product warranty from the date of purchase. During this period, you may request an unconditional return or exchange for any manufacturing defects or performance issues. Please retain your proof of purchase for warranty claims.

9.2 Onibara Support

For any inquiries, technical assistance, or warranty claims, please contact Lemorele customer service. Our support team is available 24 hours online to assist you.

• Atilẹyin Ayelujara: Visit the official Lemorele website or contact through your purchase platform.
• Imeeli Atilẹyin: Tọkasi apoti ọja rẹ tabi osise naa webojú-òpó wẹ́ẹ̀bù fún àdírẹ́sì ìmeeli ìrànlọ́wọ́ náà.

Note: For the most up-to-date contact information, please refer to the Lemorele official webojú-òpó wẹ́ẹ̀bù tàbí àwọn àlàyé ìbánisọ̀rọ̀ tí a pèsè pẹ̀lú àpótí ọjà rẹ.