PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet Instruction Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation of your PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

The PRORECK SP-218X is a powerful active subwoofer designed for sound reinforcement, featuring dual 18-inch woofers, a Class-D amplifier, and multiple DSP presets for various applications.

2. Alaye Aabo

Nigbagbogbo tẹle awọn iṣọra aabo ipilẹ nigba lilo ọja yii lati dinku eewu ina, mọnamọna, ati ipalara.

• Orisun Agbara: Connect the unit only to a 115V~60Hz power supply. Ensure the power cord is not damaged or pinched.
• Afẹfẹ: Ma ṣe dina awọn ṣiṣi atẹgun. Rii daju pe sisan afẹfẹ to peye ni ayika ẹyọ lati ṣe idiwọ igbona.
• Ọrinrin: Do not expose the unit to rain or moisture. Do not place objects filled with liquids, such as vases, on the unit. This product is not waterproof.
• Ibi: Gbé ẹ̀rọ náà sí orí ilẹ̀ tí ó dúró ṣinṣin, tí ó tẹ́jú. Má ṣe gbé e sí ẹ̀gbẹ́ àwọn orísun ooru tàbí sí ojú oòrùn tààrà.
• Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
• Mimu: The unit is heavy (159.2 lbs). Use caution and proper lifting techniques when moving it. Utilize the side handles for transport.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• 1 x PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet
• 2 x 18-inch Woofers (integrated within the cabinet)
• Okun agbara
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Awọn ẹya Ọja

• Iṣe Alagbara: 1000 Watts RMS / 5000 Watts Peak power output.
• Àwọn Woofers oní-18-inch méjì: Equipped with 80oz magnets and 3-inch voice coils for deep bass reinforcement.
• Kilasi-D Ampolutọpa: Efficient built-in amplification for clear and powerful sound.
• Awọn tito tẹlẹ DSP: Features 3 Digital Signal Processing presets for optimized sound in various scenarios.
• Asopọmọra XLR: XLR input and output jacks for easy connection to mixers or other ampalifiers.
• Agbekọja Itanna: Adjustable crossover from 35Hz to 120Hz.
• Ijade Pass giga XLR: Filtered output from 120Hz to 20KHz for connecting full-range speakers.
• Phase Selection: Button to select phase from normal to 180° for optimal multi-subwoofer setups.
• Ikole ti o tọ: Super solid housing made of plywood to reduce resonance and improve sound quality.
• Gbigbe: Two side handles for easier transport.

5. Awọn iṣakoso ati Awọn isopọ

Apejuwe aworan:

This image displays the rear control panel of the PRORECK SP-218X subwoofer, highlighting various inputs, outputs, and controls. Numbered labels correspond to the descriptions below.

1. XLR Output (FULL RANGE): Parallel balanced stereo XLR output. Delivers an exact copy of the input signal.
2. Iṣawọle XLR: Iṣagbewọle XLR iwontunwonsi fun sisopọ awọn ifihan agbara lati awọn alapọpo tabi omiiran ampalifiers.
3. Iwọn didun: Knob to increase or decrease the volume control level.
4. Ipele: Phase selection button (NORMAL - REV180°).
5. Idiwọn: LED indicator. Illuminates when the input signal is too high, which may distort the output sound or damage the unit.
6. Atọka Agbara: Atọka agbara LED.
7. XLR Output (HIGH PASS): Iṣajade XLR iwọntunwọnsi ti a filẹ (kọja-giga lati 120Hz).
8. ON/PA Yipada: Main power switch to turn the unit on and off.
9. Iṣagbewọle Voltage: Power input for 115V~60Hz.

Apejuwe aworan: This image highlights the design features of the subwoofer, including the rubber foot pads on the sides that allow the subwoofer to stand upright, the connection detail for easy assembly and movement, and the lifting handles for convenience.

6. Eto

1. Ibi: Position the subwoofer on a stable, level surface. Consider room acoustics and desired bass response when choosing a location. Ensure adequate space for ventilation.
2. Asopọ agbara: Ensure the ON/OFF switch (8) is in the OFF position. Connect the power cable to the Input Voltage (9) receptacle on the rear panel and then to a grounded 115V~60Hz AC outlet.
3. Isopọwọle Olohun:
   • Connect your mixer or audio source to the XLR Input (2) using a balanced XLR cable.
   • If connecting additional full-range speakers, use the XLR Output (HIGH PASS) (7) to send a filtered signal (120Hz and above) to those speakers. For a full-range signal to another subwoofer or device, use the XLR Output (FULL RANGE) (1).
4. Eto Iwọn didun Ibẹrẹ: Turn the Volume knob (3) to its minimum setting before powering on.

7. Awọn ilana Iṣiṣẹ

1. Agbara Tan: Flip the ON/OFF Switch (8) to the ON position. The Power Indicator (6) LED should illuminate.
2. Ṣatunṣe Iwọn didun: Slowly increase the Volume knob (3) to the desired listening level. Monitor the Limit LED (5). If it illuminates frequently or stays lit, reduce the input signal level from your source or decrease the subwoofer's volume to prevent distortion and potential damage.
3. Atunse ipele: If using multiple subwoofers or integrating with other speakers, adjust the Phase button (4) (NORMAL or REV180°) to achieve the best bass response and alignment with other audio components. Experiment with both settings to find the optimal sound.
4. Awọn tito tẹlẹ DSP: The SP-218X includes 3 DSP presets. Refer to the specific DSP control panel (if present, not detailed in provided images) for instructions on how to select and utilize these presets to optimize sound for different environments or music types.
5. Agbara Pa: Before disconnecting power or making changes to connections, turn the Volume knob (3) to minimum and then flip the ON/OFF Switch (8) to the OFF position.

8. Itọju

• Ninu: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use abrasive cleaners, waxes, or solvents.
• Afẹfẹ: Regularly check that the ventilation openings are clear of dust and debris.
• Ibi ipamọ: If storing the unit for an extended period, ensure it is in a dry, cool environment, protected from dust and extreme temperatures.
• Ayewo: Periodically inspect the power cord and all cables for any signs of damage.

9. Laasigbotitusita

10. Awọn pato

Apejuwe aworan: This image provides the key dimensions of the PRORECK SP-218X subwoofer, showing a width of 43.9 inches, a height of 22.4 inches, and a depth of 23.6 inches.

11. Atilẹyin ọja ati Support

Atilẹyin ọja: This PRORECK SP-218X subwoofer comes with a 1-year free limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Atilẹyin Onibara: For technical assistance, troubleshooting, or warranty inquiries, please contact PRORECK AUDIO customer support. Refer to the contact information provided with your purchase or visit the official PRORECK webojula.

Awọn orisun Ayelujara: Fun alaye ni afikun ati atilẹyin, o le ṣabẹwo si PRORECK Store on Amazon.

12. Ọja Ipariview

Apejuwe aworan: A iwaju view of the PRORECK SP-218X subwoofer, accompanied by a list of its main specifications: 1000 Watts RMS/5000 peak, XLR output/input, Electronic Crossover (35-120 Hz), XLR High Pass Output (120Hz-20KHz), and 3" Voice Coil.

Apejuwe aworan: The PRORECK SP-218X subwoofer positioned in a dynamic live event environment, with a crowd of people dancing and stage lighting in the background, illustrating its intended use.

Apejuwe aworan: A akojọpọ showcasing diverse applications for the PRORECK SP-218X subwoofer, including a live concert, a business meeting, an outdoor musical performance, and a fitness class, demonstrating its versatility.