Long Run Technologies Stereo Bluetooth Speakers

Ọrọ Iṣaaju

Thank you for choosing the Long Run Technologies Stereo Bluetooth Speakers. These speakers are designed to provide a superior audio experience with advanced wireless technology, allowing seamless connection to various Bluetooth-enabled devices. Their compact size, robust construction, and versatile connectivity options make them ideal for both indoor and outdoor use. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity.

Alaye Aabo

• Ma ṣe fi awọn agbohunsoke han si awọn iwọn otutu to gaju, ọriniinitutu, tabi imọlẹ orun taara.
• Avoid dropping or subjecting the speakers to strong impacts, despite their shockproof construction.
• Keep the speakers away from water or other liquids. While water-resistant, they are not waterproof and should not be submerged.
• Do not attempt to disassemble, repair, or modify the speakers. This will void the warranty and may cause damage or injury.
• Use only the provided charging cables and power sources recommended by the manufacturer.
• Ensure proper ventilation when charging or operating the speakers.
• Avoid playing audio at excessively high volumes for prolonged periods to prevent hearing damage.

Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 2 x Long Run Technologies Stereo Bluetooth Speakers
• 2 x Rubber Stands
• 2 x Awọn okun gbigba agbara USB-C
• 2 x 3.5mm Aux Cables
• Ilana itọnisọna

Ọja Pariview

The Long Run Technologies Stereo Bluetooth Speakers feature a sleek, modern design with intuitive controls and multiple connectivity options. Each speaker is approximately 3 inches tall and comes with a rubber stand for stable placement.

Agbọrọsọ irinše

• Agbọrọsọ Grille: Front-facing audio output.
• Control Panel (Rear): Contains power button, volume controls, and mode selection.
• Ibudo gbigba agbara (USB-C): Fun sisopọ okun gbigba agbara.
• Iho kaadi TF/SD: For direct audio playback from a memory card.
• Input Audio 3.5mm: Fun asopọ onirin si awọn ẹrọ.
• Rubber Stand: Provides stability and slight upward angle for optimal sound projection.

Ṣeto

Gbigba agbara si awọn Agbọrọsọ

Before first use, fully charge both speakers. A full charge provides approximately 10 hours of playtime.

1. Connect the provided USB-C charging cable to the charging port on the back of each speaker.
2. So opin miiran okun USB-C pọ si ohun ti nmu badọgba agbara USB ibaramu (kii ṣe pẹlu) tabi ibudo USB ti kọnputa kan.
3. The charging indicator light will illuminate during charging and turn off when fully charged. Charging typically takes about 2 hours.

Initial Bluetooth Pairing (Single Speaker)

1. Rii daju pe a ti gba agbara si agbọrọsọ.
2. Press and hold the power button on the back of the speaker until you hear an audio prompt indicating it's in pairing mode.
3. On your Bluetooth-enabled device (phone, laptop, tablet), go to Bluetooth settings and search for available devices.
4. Select "BS-05" or similar from the list to connect. You will hear a confirmation tone once paired.

Ṣiṣẹ awọn Agbọrọsọ

Awọn iṣakoso ipilẹ

• Titan/Apapa: Tẹ mọlẹ bọtini agbara.
• Iwọn didun Soke/Isalẹ: Use the '+' and '-' buttons on the speaker's control panel, or adjust directly from your connected device.
• Ṣiṣẹ/Daduro: Press the 'Phone/Play/Pause' button.
• Itele / Tẹlẹ Orin: Long press the '+' or '-' buttons.

Multi-Speaker Pairing (True Stereo & Surround Sound)

These speakers support pairing an unlimited number of units for an immersive sound experience. For true stereo sound with two speakers, follow these steps:

1. Connect a single speaker to your Bluetooth device first (as per "Initial Bluetooth Pairing" above). This will be your primary speaker.
2. Tan agbohunsoke keji.
3. On the second speaker, long press the "Phone/Play/Pause" button until you hear an audio prompt indicating that it has joined the primary speaker.
4. To add additional speakers for multi-room or surround sound, turn them on and repeat step 3 for each additional speaker.

Awọn ọna Asopọmọra

Your speakers offer three versatile modes of usability:

• Stereo Bluetooth Mode: Connect wirelessly to any Bluetooth-enabled device (phones, laptops, PCs, Macbooks, tablets, TVs).
• Iho kaadi TF/SD: Insert a TF/SD card with your music files for direct playback without a Bluetooth device.
• Okun Olohun 3.5mm: Use the included 3.5mm audio cable to connect to devices without Bluetooth capabilities.

Awọn ipe Ọfẹ Ọwọ

The speakers feature a built-in microphone for hands-free calling when connected via Bluetooth to your smartphone.

• Idahun/Ipe Ipari: Press the 'Phone/Play/Pause' button.
• Kọ Ipe: Long press the 'Phone/Play/Pause' button.

Itoju

Proper care and maintenance will extend the life of your speakers.

• Ninu: Use a soft, dry cloth to wipe the surface of the speakers. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ibi ipamọ: Nigbati o ko ba wa ni lilo fun awọn akoko ti o gbooro sii, tọju awọn agbohunsoke ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Itọju Batiri: To maintain battery health, avoid fully discharging the battery frequently. Recharge the speakers regularly, even if not in constant use.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

Long Run Technologies products are backed by a limited warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official Long Run Technologies website. If you encounter any issues or require technical assistance, please contact Long Run Technologies customer support through their official channels. Contact information can typically be found on the product packaging or the brand's webojula.