Ọrọ Iṣaaju
Thank you for choosing the VANPO Digital Torque Wrench. This manual provides essential information for the safe and effective use of your new tool. Please read it thoroughly before operation and retain it for future reference. This digital torque wrench offers precise torque measurement and application, suitable for various tasks including bicycle and motorcycle maintenance.
Image: The VANPO Digital Torque Wrench, a black and red tool with a digital display showing a torque value.
Alaye Aabo
- Máa lo àwọn ohun èlò ààbò ara ẹni tó yẹ nígbà gbogbo, bíi àwọn awò ojú ààbò.
- Rí i dájú pé iṣẹ́ náà wà ní ìpamọ́ kí o tó lo agbára.
- Do not exceed the maximum torque capacity of 30 Nm. Over-torquing can damage the tool and the fastener.
- Jeki ọpa mọ ki o gbẹ. Yago fun ifihan si ọrinrin tabi iwọn otutu to gaju.
- Do not use the wrench as a pry bar or hammer.
- Store the wrench in its protective case when not in use to prevent damage.
- The load torque must not exceed 120% of the maximum torque value displayed on the digital torque wrench screen. Exceeding this limit may cause deformation of the strain gauge and render the torque wrench unusable.
Ṣeto
1. Fifi sori batiri
The VANPO Digital Torque Wrench operates on batteries. To install or replace batteries:
- Wa ideri apo batiri naa, nigbagbogbo ni isalẹ ti ọwọ naa.
- Use a small screwdriver or coin to open the cover.
- Insert the required batteries (e.g., AAA batteries) according to the polarity indicators (+/-).
- Ni aabo pa ideri kompaktimenti batiri ni aabo.
2. Agbara akọkọ Lori
Press the power button to turn on the wrench. The display will illuminate, and the wrench will perform a self-test before entering the default operating mode.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
- Lati mu agbara ṣiṣẹ, tẹ bọtini naa Agbara bọtini.
- Lati fi agbara si pipa, tẹ mọlẹ Agbara button for a few seconds until the display turns off. The wrench also features an automatic shutdown function after a period of inactivity to conserve battery life.
2. Aṣayan Unit
The wrench supports four measurement units: Nm, in.lb, ft.lb, and kg.cm. To change the unit:
- Tẹ awọn U (Unit) button.
- The display will cycle through the available units. Release the button when your desired unit is shown.
Image: The digital display of the torque wrench illustrating the four available measurement modes: Newton-meters (Nm), inch-pounds (in.lb), foot-pounds (ft.lb), and kilogram-centimeters (kg.cm).
3. Operating Modes: Preset, Track, and Peak
The wrench features three primary operating modes: Preset, Track, and Peak.
Àwòrán: Mẹ́ta views of the digital torque wrench, demonstrating the Preset mode for setting a target torque, the Track mode for real-time torque display, and the Peak mode for capturing the maximum torque applied.
Ipo Tto tẹlẹ
This mode allows you to set up to 6 common torque values for quick access. When the set torque is reached, the wrench will provide an alert.
- Tẹ awọn M (Mode) button to enter Preset mode (indicated by 'M1', 'M2', etc., on the display).
- Lo awọn Up ati Isalẹ arrow buttons to adjust the target torque value.
- Tẹ M again to save the preset or cycle to the next preset slot.
Orin Ipo
In Track mode, the display shows the real-time torque value as it is being applied. This is useful for monitoring torque changes continuously.
- Tẹ awọn M (Mode) button until 'TRACK' is displayed.
- Apply torque, and the display will show the live torque value.
Ipo tente oke
Peak mode captures and displays the maximum torque value achieved during an application. The wrench can store up to 500 groups of data.
- Tẹ awọn M (Mode) button until 'PEAK' is displayed.
- Apply torque to the fastener. The display will hold the highest torque value reached.
- Lati tunview stored data, consult the detailed instructions in the full manual (if applicable) or use the C (Clear/Memory) button.
4. Quick Release Function
The quick release design allows for fast and easy changing of sockets and accessories, preventing stuck parts and saving effort.
Image: The head of the digital torque wrench with a quick-release button for easily attaching and detaching sockets. The image also illustrates the wrench's bidirectional functionality, indicating clockwise accuracy of ±2% and counter-clockwise accuracy of ±3%.
5. Reminder Mode (Audible and Visual Alerts)
When approaching or reaching the preset torque value, the wrench provides both audible beeps and flashing LED lights to prevent over-tightening.
- As the torque approaches the target (e.g., 85-95%), the LED will flash green, and short beeps will sound.
- When the target torque is reached (100%), the LED will flash red, and a continuous beep will sound.
Image: The digital torque wrench displaying a torque value, with an illuminated LED indicator and a graphic representing an audible alert (sound waves), signifying the reminder mode in action.
6. Bidirectional Ratchet Function
The wrench features a bidirectional ratchet head, allowing for torque application in both clockwise and counter-clockwise directions. The accuracy is ±2% in the clockwise direction and ±3% in the counter-clockwise direction.
Image: A collage showing the digital torque wrench being used on various parts of a bicycle, demonstrating its application in tightening fasteners on bicycle components.
Itoju
- Ninu: Wipe the wrench with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
- Ibi ipamọ: Store the wrench in its original case in a dry, cool place, away from direct sunlight and moisture.
- Rirọpo Batiri: Replace batteries promptly when the low battery indicator appears. Remove batteries if the wrench will not be used for an extended period to prevent leakage.
- Iṣatunṣe: For optimal accuracy, periodic calibration by a qualified service center is recommended.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Wrench ko ni agbara lori. | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Rọpo awọn batiri pẹlu awọn tuntun, ni idaniloju polarity ti o pe. |
| Battery drains quickly when not in use. | Possible internal power leakage or faulty batteries. | Ensure the wrench is fully powered off. Remove batteries if storing for extended periods. Contact customer support if the issue persists with new batteries. |
| Awọn kika iyipo ti ko pe. | Wrench needs calibration or is damaged. | Ensure proper technique is used. Avoid exceeding maximum torque. Consider professional calibration. |
| No audible/visual alert at target torque. | Reminder mode disabled or faulty. | Check settings to ensure reminder mode is active. Ensure batteries have sufficient power. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | VP029-1 |
| Iwon Wakọ | 1/4 inch |
| Iwọn iyipo | 1.5 - 30 Nm (Newton meters) |
| Ìpéye (Ní ọwọ́ aago) | ± 2% |
| Accuracy (Counter-clockwise) | ± 3% |
| Iwọn Iwọn | Metiriki |
| Awọn ọna ṣiṣe | Preset, Track, Peak |
| Iranti Tto tẹlẹ | 6 ṣeto |
| Ibi ipamọ data | Up to 500 groups (Peak mode) |
| Awọn itaniji | Audible (Buzzer) and Visual (LED Indicator) |
| Ohun elo | Chrome Vanadium Irin |
| Orisun agbara | Batiri ṣiṣẹ |
| Àwọ̀ | Dudu |
Alaye atilẹyin ọja
Specific warranty details for the VANPO Digital Torque Wrench are provided by the manufacturer or seller at the time of purchase. Please refer to your purchase documentation or contact the seller directly for information regarding warranty coverage, terms, and conditions.
Onibara Support
For technical assistance, product inquiries, or service requests, please contact VANPO customer support through the retailer where the product was purchased or visit the official VANPO webojula fun alaye olubasọrọ.