Dirt Devil Multi-Surface Rewind+ Upright Bagless Vacuum Cleaner

1. Apejọ ati Ibẹrẹ Oṣo

Before operating your Dirt Devil Multi-Surface Rewind+ vacuum cleaner, ensure all components are correctly assembled. Refer to the 'What's in the Box' diagram to identify all parts.

Nọmba 1: Awọn ohun elo to wa

1. Mu Apejọ: Insert the upper handle into the main vacuum body until it clicks securely into place.
2. Asopọ okun: Connect the flexible hose to the designated port on the vacuum body. Ensure a tight fit to maintain suction.
3. Ibi ipamọ irinṣẹ: Attach the included cleaning tools (Pet Upholstery tool, Turbo tool, 2-in-1 Dusting Brush and Crevice tool) to the onboard storage clips for easy access.

Figure 2: Assembled Vacuum with Tools

2. Awọn ilana Iṣiṣẹ

2.1 Titan / Pa a

Plug the power cord into a suitable electrical outlet. To turn the vacuum on, step on the power pedal located near the base. Step on it again to turn the vacuum off.

2.2 Cleaning roboto

The Multi-Surface Rewind+ is designed for effective cleaning on both carpets and hard floors. The PowerPass Technology helps prevent dust and dirt from scattering on hard surfaces.

Figure 3: Multi-Surface Cleaning

Figure 4: Debris Containment

2.3 Lilo Awọn asomọ

The removable wand and Click Lock tool kit allow for versatile cleaning. Detach the wand and attach the desired tool for above-floor cleaning, upholstery, or tight spaces.

• Ọpa Ile-ọṣọ Pet: Ideal for removing pet hair from furniture and stairs.
• Ọpa Turbo: Provides concentrated suction for stubborn dirt and debris.
• 2-in-1 Dusting Brush and Crevice Tool: Use the brush for dusting delicate surfaces and the crevice tool for narrow gaps.

Figure 5: Above-Floor Cleaning

Figure 6: Pet Hair Cleaning

2.4 Cord Management

The vacuum features a one-touch cord rewind system. To retract the power cord, gently press the cord rewind pedal located on the side of the vacuum.

Figure 7: One-Touch Cord Rewind

3. Itọju

3.1 Emptying the Dirt Cup

For optimal performance, empty the dirt cup regularly, especially when debris reaches the 'Max Fill' line. The large, easy-release dirt cup features a one-touch button for convenient emptying.

1. Rii daju pe igbale ti yọọ kuro.
2. Press the dirt cup release button to detach the dirt cup from the vacuum.
3. Fi ago eruku naa si ori apoti idọti kan.
4. Press the one-touch button on the bottom of the dirt cup to open the lid and release debris.
5. Close the lid and reattach the dirt cup to the vacuum until it clicks into place.

Figure 8: Emptying the Dirt Cup

3.2 Ajọ Itọju

The vacuum features extended life filtration with a washable filter. Regularly check and clean the filter to maintain suction power and reduce dust particles released into the air.

1. Yọọ igbale kuro ki o yọ ago idoti naa kuro.
2. Locate and remove the filter assembly from the dirt cup.
3. Tap the filter over a trash can to remove loose dirt.
4. Rinse the filter under running water until the water runs clear. Do not use detergent.
5. Allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum. Do not operate the vacuum with a wet filter.

3.3 Brush Roll Cleaning

Periodically inspect the brush roll for tangled hair or debris. Unplug the vacuum before attempting to clean the brush roll. Use scissors to carefully cut away any tangled hair or threads.

4. Laasigbotitusita

Ti o ba pade awọn ọran pẹlu igbale rẹ, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi:

If the problem persists after attempting these solutions, please contact Dirt Devil customer support.

5. Awọn alaye ọja

6. Atilẹyin ọja ati Support

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Dirt Devil website. For additional support, parts, or service, you may also visit the Dirt Devil Store on Amazon.