ASAKUKI ZH-001S 4L Ultrasonic Humidifier User Manual

Ọrọ Iṣaaju

Thank you for choosing the ASAKUKI ZH-001S 4L Ultrasonic Humidifier. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new humidifier. Please read it thoroughly before use and retain it for future reference.

Image: The ASAKUKI ZH-001S 4L Ultrasonic Humidifier, a white cylindrical unit with a digital display and mist output.

Ṣeto

1. Unpacking

• Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
• Check for any damage during transit. If damaged, do not use and contact customer support.
• Ensure all accessories are present: humidifier unit, remote control, cleaning brush, and user manual.

2. Ifiweranṣẹ

• Gbé ohun èlò ìfọwọ́sí omi sí orí ilẹ̀ tí ó le koko, tí ó tẹ́jú, tí kò sì ní omi, tí ó wà ní ìwọ̀n 15 cm sí ògiri àti àwọn ohun èlò ìṣiṣẹ́.
• Avoid placing it directly on carpet or near heat sources.
• Ensure the mist outlet is not directed at furniture, walls, or electronic devices.

3. Water Filling (Top-Fill Design)

1. Yọ ideri oke ti ọriniinitutu kuro.
2. Pour clean, cool tap water directly into the water tank. Do not exceed the 'MAX' fill line.
3. For optimal performance and to prevent mineral buildup, distilled or demineralized water is recommended.
4. Rọpo ideri oke ni aabo.

Aworan: A sunmọ-soke view demonstrating the top-fill water feature of the humidifier, showing water being poured directly into the tank.

4. Ibẹrẹ Agbara-On

• Pulọọgi okun agbara sinu iṣan itanna to dara.
• The unit will beep once, and the display will light up briefly.
• Tẹ bọtini agbara lori nronu iṣakoso tabi isakoṣo latọna jijin lati tan-an humidifier.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Paa

• Tẹ awọn Agbara bọtini () lati tan-an tabi pa ẹrọ naa.

2. Ṣíṣe àtúnṣe Ìpele Àìsàn

• Tẹ awọn owusu bọtini () to cycle through 3 mist output levels: Low (100ml/h), Medium (140ml/h), and High (200ml/h).

Image: The humidifier demonstrating its three adjustable mist output levels, from low to high, with corresponding run times.

3. Automatic Humidity Control

• The humidifier features a humidity sensor to automatically maintain a comfortable humidity level between 40% and 60%.
• Tẹ awọn Ipo Aifọwọyi bọtini () to activate this function. The unit will adjust mist output based on the ambient humidity.
• You can also set a specific target humidity level. Press the Eto Ọriniinitutu bọtini () to adjust the desired humidity in 5% increments from 40% to 80%. The unit will automatically start/stop to maintain this level.

4. Ipo orun

• Mu ṣiṣẹ Ipo orun () for quiet operation (below 35dB) and automatic humidity adjustment.
• In Sleep Mode, the display lights will dim or turn off to avoid disturbance.

Image: The humidifier operating in a dimly lit bedroom, illustrating its quiet sleep mode and soft night light.

5. Iṣẹ Aago

• Tẹ awọn Aago bọtini () to set the operating time from 1 to 12 hours. The humidifier will automatically turn off once the set time expires.

6. Alẹ Light

• Tẹ awọn Imọlẹ alẹ bọtini () to turn the warm-colored night light on or off.

7. Aroma Diffuser Function

• Locate the aroma box at the base of the unit.
• Pull out the aroma box and add a few drops of your preferred essential oil onto the aroma pad.
• Slide the aroma box back into the unit. The humidifier will diffuse the aroma along with the mist.
• Iṣọra: Ma ṣe ṣafikun awọn epo pataki taara sinu ojò omi.

Image: A hand adding essential oil drops to the aroma pad in the pull-out tray of the humidifier.

8. Isakoṣo latọna jijin

• The included remote control allows convenient operation from up to 7 meters away.
• Ensure the remote is pointed directly at the humidifier for optimal response.

Image: A hand holding the remote control, pointing it towards the humidifier, demonstrating remote operation.

Itoju

Regular cleaning is crucial for maintaining the humidifier's efficiency and preventing bacterial growth and mineral buildup.

1. Ojoojumọ Itọju

• Empty the water tank and wipe it dry daily, especially if not in continuous use.
• Refill with fresh, clean water.

2. Weekly Cleaning (Water Tank and Base)

1. Unplug the humidifier and remove the top cover.
2. Sofo eyikeyi omi ti o ku lati inu ojò ati ipilẹ.
3. Pour 1 cup (240ml) of white vinegar into the water tank and base. Let it soak for 30 minutes.
4. Use a soft brush or cloth to clean the inside of the tank and the ultrasonic atomizer in the base.
5. Fi omi ṣan daradara pẹlu omi mimọ titi õrùn kikan yoo lọ.
6. Nu gbogbo ojú ilẹ̀ gbẹ.

3. Cleaning Filter

• The humidifier includes a cleaning filter designed to reduce impurities and prevent white dust.
• Yọ àlẹmọ kuro ninu ojò omi.
• Fi omi ṣan àlẹmọ labẹ omi mimu tutu.
• For deeper cleaning, soak the filter in a 1:1 solution of white vinegar and water for 30 minutes, then rinse thoroughly.
• Replace the filter. The filter can be used without affecting other functions.

Image: A diagram illustrating the cleaning filter's location and function within the humidifier, showing how it removes impurities.

4. Ibi ipamọ igba pipẹ

• Clean and dry all parts of the humidifier thoroughly.
• Fipamọ kuro ni itura, ibi gbigbẹ.

Laasigbotitusita

Awọn pato

• Awoṣe: ZH-001S
• Agbara: 4 liters
• Agbara: 27W
• Agbegbe Ibo: Up to 18 Tatami Mats (approx. 30 square meters)
• Ise Tesiwaju: Titi di wakati 40
• Ijade owusu ti o pọju: 200ml/h (3 adjustable levels)
• Ipele Ariwo: <35dB (in Sleep Mode)
• Ohun elo: HIPS, PP
• Awọn iwọn: 32.3 x 27.1 x 17.3 cm
• Ìwúwo: 1.67 kg
• Awọn ẹya: Timer, Remote Control, Leak Prevention, Adjustable Humidity Control, Quiet Operation, Night Light, Aroma Diffuser, Dry-burn Protection

Atilẹyin ọja ati Support

ASAKUKI provides a one-year quality guarantee and lifetime technical support for this product. If you encounter any issues or have questions regarding your humidifier, please do not hesitate to contact our customer support team. We are committed to ensuring your satisfaction and comfortable living experience.