Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. Ifihan

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Alaye Aabo

• Ka gbogbo awọn ilana ni pẹkipẹki ṣaaju lilo.
• Ẹrọ yii jẹ ipinnu fun lilo inu ile nikan.
• Do not expose the remote control to moisture or extreme temperatures.
• Use only AAA batteries as specified. Ensure correct polarity when inserting batteries.
• Jeki kuro ni arọwọto awọn ọmọde.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Odi Oke dimu
• Awọn skru iṣagbesori (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Ọja Ipariview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• LORI Bọtini: Press to turn ON all linked devices.
• Bọtini PA: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): Tẹ lati mu imọlẹ pọ si.
• Brightness Down (☁): Tẹ lati dinku imọlẹ.
• Bọtini M: Cycles through dynamic modes (if supported by the connected controller for single color).
• 30% Imọlẹ: Press to set brightness to 30%.
• 60% Imọlẹ: Press to set brightness to 60%.
• 100% Imọlẹ: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Eto

5.1 Fifi sori batiri

The RC01RF remote control requires two AAA batteries (not included).

1. Wa ideri iyẹwu batiri ni ẹhin isakoṣo latọna jijin.
2. Gbe ideri naa ṣii.
3. Fi awọn batiri AAA meji sii, ni idaniloju polarity ti o pe (+ ati -).
4. Gbe ideri iyẹwu batiri pada si aaye titi yoo fi tẹ ni aabo.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Agbara lori LED rinhoho adarí.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Wall Mount fifi sori

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Lu awaoko ihò ti o ba wulo.
4. Secure the wall mount holder to the surface using the provided screws.
5. Fi isakoṣo latọna jijin sinu ohun dimu.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Awọn ilana Iṣiṣẹ

6.1 Basic Control (All Zones)

• Tan/PA: Tẹ awọn ON bọtini lati tan gbogbo awọn ti sopọ mọ ina. Tẹ awọn PAA bọtini lati pa gbogbo awọn ti sopọ mọ ina.
• Atunse Imọlẹ: Fi ọwọ kan awọn Oruka Imọlẹ to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Imọlẹ Soke (☀) ati Imọlẹ isalẹ (☁) buttons for incremental adjustments.
• Ìmọ́lẹ̀ tí a ti ṣètò tẹ́lẹ̀: Use the dedicated buttons to quickly set brightness to 30%, 60%, tabi 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Yan Agbegbe kan: Tẹ ohun ti o fẹ Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Tẹ awọn Bọtini M to cycle through available dynamic modes.
• Lo awọn S- ati S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Itọju

7.1 Batiri Rirọpo

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Follow the steps in Section 5.1 to open the battery compartment.
2. Yọ awọn batiri AAA atijọ kuro.
3. Insert two new AAA batteries, observing correct polarity.
4. Pa abala batiri naa.

Sọ awọn batiri ti a lo ni ibamu si awọn ilana agbegbe.

7.2 Ninu

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. Laasigbotitusita

9. Awọn pato

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.