GP RECYKO E821 USB Charger Instruction Manual

1. Ifihan

The GP RECYKO E821 USB Charger is a lightweight and portable charging solution designed for NiMH AA and AAA rechargeable batteries. It features eight slots, allowing simultaneous charging of up to eight batteries. This charger provides an environmentally friendly and cost-effective power supply solution for your devices.

2. Alaye Aabo

Please read all safety instructions carefully before using the charger to ensure safe operation and prolong the life of your batteries and charger.

• Idaabobo overcharge: The charger is equipped with an automatic power-off timer (12 hours) and dV full charge detection to prevent overcharging.
• Voltage Idaabobo: Features protection against overvoltage.
• Idaabobo Circuit Kukuru: Ti ṣe apẹrẹ lati yago fun awọn iyika kukuru.
• Temperature Interruption: Includes temperature monitoring to prevent overheating.
• Primary Battery Protection: Detects and prevents charging of non-rechargeable (disposable) batteries.
• Idaabobo Polarity yiyipada: Ensures safe operation even if batteries are inserted incorrectly.
• Do not attempt to charge damaged or leaking batteries.
• Use only with NiMH rechargeable batteries.
• Keep the charger away from water and excessive heat.

3. Package Awọn akoonu

Image: Contents of the GP RECYKO E821 charger package.

The GP RECYKO E821 USB Charger package typically includes:

• 1 x GP RECYKO E821 8-slot USB Charger
• 4 x GP RECYKO AA NiMH Batteries (2100 mAh each)
• 4 x GP RECYKO AAA NiMH Batteries (850 mAh each)
• 1 x Okun Ngba agbara USB
• 1 x Ilana itọnisọna

4. Eto

The GP RECYKO E821 charger is designed for ease of use. Follow these steps for initial setup:

1. Yọọ kuro: Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. So agbara: Connect the provided USB charging cable to the charger's USB input port.
3. Orisun Agbara: Plug the other end of the USB cable into a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank) with a minimum output of DC 5.0V / 1A. For optimal charging speed, a 2.0A output is recommended.

Image: The compact and portable design of the GP RECYKO E821 charger.

5. Awọn ilana Iṣiṣẹ

5.1 Fi sii awọn batiri

The charger supports both AA and AAA NiMH rechargeable batteries. It can charge 2, 4, 6, or 8 batteries simultaneously.

1. Rii daju pe ṣaja ti sopọ si orisun agbara.
2. Insert AA or AAA NiMH rechargeable batteries into the charging slots, ensuring correct polarity (+ and - ends match the markings on the charger).

Image: The GP RECYKO E821 charger with a mix of AA and AAA batteries correctly inserted into its slots.

Image: Visual representation of the charger's compatibility with both AA and AAA battery sizes.

5.2 Gbigba agbara ilana

Once batteries are correctly inserted and the charger is connected to a USB power source, the charging process will begin automatically.

• The charging time for 2 batteries (using DC 5.0V / 2.0A min input) is approximately 360 minutes (6 hours) for 2100mAh AA batteries and approximately 150 minutes for 850mAh AAA batteries.
• The charger can handle batteries with different capacities (650 - 2600 mAh).

Image: Graphic illustrating the approximate 6-hour fast charging capability for AA batteries.

5.3 LED Atọka

The charger features 4 LED indicators to display the charging status for each pair of batteries:

• Agbara Tan: Green LED flashes for 0.5 seconds and then turns off.
• Gbigba agbara: Green LED seju laiyara.
• Ti gba agbara ni kikun: Green LED lights up solid.
• Bad Batteries/Disposable Batteries Inserted: Green LED flashes fast.

Image: Visual representation of the LED indicators and their corresponding charging statuses (empty, charging, full, error).

Aworan: A sunmọ-soke view of the LED power indicators on the charger, showing their illumination.

5.4 Ṣayẹwo ipo batiri

The E821 charger includes a