EVTSCAN Soil Tester User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

Ọja Pariview

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

olusin 1: Iwaju view of the EVTSCAN Soil Tester.

Awọn ẹya pataki:

• Rọrun lati Lo: Obtain test results quickly by inserting the probe into the soil.
• Wiwọn pipe: Designed for precise readings of environmental conditions.
• Iṣẹ́ Títì Dátà: A dedicated HOLD button allows for convenient data viewing.
• Apẹrẹ to gbe: Compact and lightweight for easy transport and use in various locations.
• Ohun elo to pọ: Suitable for family plants, gardens, lawns, and farms.

Ṣeto

Fifi sori batiri:

1. Wa yara batiri ni ẹhin ẹrọ naa.
2. Ṣii ideri iyẹwu batiri naa.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. Fi batiri 9V sii, ki o rii daju pe o pe polarity to tọ.
5. Pa ideri batiri naa ni aabo.

Figure 2: Location of the battery compartment.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso ẹrọ:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• Bọtini TAN/PA:
  • Short press to turn the device on.
  • Long press for 3 seconds to turn the device off.
  • The device will automatically turn off after 15 minutes of inactivity to conserve battery life.
• Bọtini ℃/℉:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• Bọtini Dimu:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

Ṣiṣe Awọn wiwọn:

1. Turn on the device by short pressing the TAN/PA bọtini.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. Ti o ba fẹ, tẹ bọtini naa DIMU button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

Olusin 5: Example of readings on the display.

Awọn pato

Itoju

• Ninu: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• Ibi ipamọ: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• Rirọpo Batiri: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• Yago fun Ipa: Handle the device with care to prevent damage to the probe or internal components.

Laasigbotitusita

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.