1. Ọja Ipariview

The kielle Oudee Douche System, Model 20602000, is a modern shower solution designed for comfort and functionality. It features an integrated thermostat for precise temperature control, a large 260mm overhead shower, and a hand shower with three distinct spray types. This manual provides essential information for the safe and correct use of your new shower system.

Awọn ẹya pataki:

• Integrated Thermostat: Ensures consistent water temperature.
• Adjustable Overhead Shower: Height can be adjusted for user preference.
• Practical Shelf: Convenient storage for shower gels and shampoos.
• Three Spray Types: Includes SilkFlow for gentle cleaning and relaxation.
• TouchClean Function: Facilitates easy cleaning of spray nozzles.

2. Alaye Aabo

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage to the product.

• A ṣe iṣeduro fifi sori Ọjọgbọn: For optimal performance and safety, installation by a qualified plumber is recommended.
• Ipese Omi: Rí i dájú pé a ti pa omi pàtàkì kí a tó bẹ̀rẹ̀ iṣẹ́ ìfisílé.
• Awọn Eto otutu: The thermostat is factory-set to prevent scalding. Do not tamper with internal components unless instructed by a professional.
• Ninu: Use only mild cleaning agents. Abrasive cleaners can damage the finish.
• Awọn ọmọde: Supervise children when they are near the shower system to prevent accidental adjustments or misuse.

3. Eto ati fifi sori

This section provides general guidance for installing the kielle Oudee Douche System. Refer to the detailed installation diagram for specific measurements and component placement.

3.1 Package Awọn akoonu

Ṣaaju fifi sori ẹrọ, rii daju pe gbogbo awọn eroja wa:

• Overhead shower head
• Ọwọ iwe
• Okun Shower
• Shower column/rail
• Thermostat mixing unit with integrated shelf
• Mounting hardware (screws, wall plugs, gaskets)
• Ilana itọnisọna

3.2 fifi sori Igbesẹ

1. Mura agbegbe fifi sori ẹrọ: Turn off the main water supply. Clear the area where the shower system will be installed.
2. Mount the Thermostat Unit: Position the thermostat unit at the desired height. Mark and drill holes for mounting. Secure the unit to the wall using the provided hardware. Ensure it is level.
3. So awọn ipese omi pọ: Connect the hot and cold water lines to the corresponding inlets on the thermostat unit. Use appropriate seals and tighten connections securely to prevent leaks.
4. Kó Ọwọ̀n Ìwẹ̀ jọ: Attach the shower column to the thermostat unit. Secure any additional wall brackets for stability.
5. Fi sori ẹrọ Overhead Shower: Attach the overhead shower head to the top of the shower column. Ensure it is securely fastened.
6. Fi Ọwọ Shower ati Hose sori ẹrọ: Connect the shower hose to the thermostat unit and the hand shower. Place the hand shower in its adjustable holder on the column.
7. Idanwo fun Leaks: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections.
8. Idanwo Iṣẹ ṣiṣe: Test both the overhead and hand showers, and verify the thermostat's temperature control.

4. Awọn ilana Iṣiṣẹ

Familiarize yourself with the controls to fully utilize your kielle Oudee Douche System.

4.1 otutu Iṣakoso

The thermostat unit features a temperature control knob. Rotate the knob to adjust the water temperature. A safety stop is typically set at 38°C (100°F) to prevent accidental scalding. To exceed this temperature, press the safety button while turning the knob.

4.2 Water Flow and Diverter

Use the diverter knob or button on the thermostat unit to switch between the overhead shower and the hand shower. Adjust the flow rate by turning the main control knob.

4.3 Hand Shower Spray Types

The hand shower offers three distinct spray types for varied showering experiences. These can typically be selected by pressing a button or rotating a dial on the hand shower head itself.

• SilkFlow: A gentle, soft spray designed for relaxation and thorough rinsing.
• EasyTẹ: (Implied feature, likely for easy spray selection)
• MistFlow: A fine, invigorating mist spray.

4.4 Giga tolesese

The hand shower holder on the column can be adjusted vertically to suit different user heights. Loosen the holder, slide it to the desired position, and then tighten it to secure.

5. Itọju

Regular cleaning and maintenance will ensure the longevity and optimal performance of your kielle Oudee Douche System.

5.1 Cleaning the Shower Heads (TouchClean)

The shower heads are equipped with a TouchClean function. To remove limescale and mineral deposits from the nozzles, simply rub them with your finger or a soft cloth. This should be done regularly, especially in areas with hard water.

5.2 Gbogbogbo Cleaning

• Clean the surfaces of the shower system with a soft cloth and a mild, non-abrasive cleaning agent.
• Avoid using harsh chemicals, abrasive sponges, or cleaners containing alcohol, acid, or ammonia, as these can damage the finish.
• Fi omi ṣan daradara pẹlu omi mimọ lẹhin mimọ ati gbẹ pẹlu asọ asọ lati ṣe idiwọ awọn aaye omi.

6. Laasigbotitusita

If you encounter issues with your kielle Oudee Douche System, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact kielle customer support or a qualified plumber.

7. Awọn pato

Detailed technical specifications for the kielle Oudee Douche System, Model 20602000.

8. Atilẹyin ọja ati Support

kielle products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official kielle webojula.

For technical support, spare parts, or any inquiries regarding your kielle Oudee Douche System, please contact kielle customer service through their official channels. When contacting support, please have your model number (20602000) and purchase information readily available.