Jectse M10-3 4G Portable WiFi Router User Manual

1. Ọja Ipariview

The Jectse M10-3 is a portable 4G WiFi router designed to provide high-speed internet access on the go. With a maximum speed of 150Mbps, it supports various devices including desktops, laptops, tablets, and mobile phones. Its compact design and built-in 3000mAh lithium battery make it ideal for business, travel, and other multi-scenario applications, ensuring stable 4G internet connectivity in Europe, Southeast Asia, and Africa.

Aworan 1.1: Iwaju view of the Jectse M10-3 4G Portable WiFi Router, showcasing its compact design and indicator lights.

Image 1.2: The Jectse M10-3 router highlighting its built-in 3000mAh lithium battery, which provides extended battery life for portable use.

2. Ohun ti o wa ninu Apoti

Jọwọ rii daju pe gbogbo awọn nkan wa ninu package:

• 1 x Jectse M10-3 Mobile Hotspot
• 1 x Itọsọna olumulo (iwe yii)
• 1 x Okun USB

Image 2.1: Contents of the Jectse M10-3 package, including the mobile hotspot device and its USB charging cable.

3. Awọn ilana iṣeto

Follow these steps to set up your Jectse M10-3 Mobile Hotspot:

3.1. Fi kaadi SIM sii

1. Carefully remove the back cover of the mobile hotspot.
2. Locate the SIM card slot. Ensure you are inserting the SIM card into the correct slot, not the memory card slot.
3. Insert your activated 4G SIM card into the designated slot until it clicks into place.
4. Rọpo ideri ẹhin.

Aworan 3.1: Ti abẹnu view of the Jectse M10-3, showing the battery compartment and the SIM card slot for network connectivity. Note the default Wi-Fi credentials printed on the label: IP: 192.168.0.1, User Name: admin, Password: admin.

3.2. Agbara Lori

Press and hold the power button (usually located on the side or front) for a few seconds until the indicator lights illuminate.

3.3. Nsopọ si Wi-Fi

1. On your device (laptop, tablet, mobile phone), open the Wi-Fi settings.
2. Wa fun available Wi-Fi networks. The default SSID (network name) is typically printed on a label inside the device (refer to Image 3.1 for example: SSID: 4G WIFI_XXXX).
3. Select the network name for your Jectse M10-3.
4. Enter the Wi-Fi key (password). The default key is also printed on the label (refer to Image 3.1 for example: KOKO: 1234567890).
5. Once connected, your device should have internet access.

4. Awọn ilana Iṣiṣẹ

4.1. Nsopọ Awọn ẹrọ pupọ

The Jectse M10-3 can support multiple devices simultaneously, allowing you to share your 4G internet connection with laptops, tablets, and smartphones. Simply follow the Wi-Fi connection steps (Section 3.3) on each device you wish to connect.

Image 4.1: The Jectse M10-3 router demonstrating its capability to provide Wi-Fi connectivity to various devices such as tablets, laptops, and desktop computers.

4.2. Iwọle si Web Atọka Iṣakoso

To manage advanced settings, such as changing the Wi-Fi name (SSID) or password, access the web ni wiwo iṣakoso:

1. Ensure your device is connected to the Jectse M10-3's Wi-Fi network.
2. Ṣii a web ẹrọ aṣawakiri (fun apẹẹrẹ, Chrome, Firefox, Edge).
3. Nínú àdírẹ́sì, tẹ àdírẹ́sì IP àìyẹ̀wọ́: 192.168.0.1 (as seen in Image 3.1) and press Enter.
4. Tẹ orukọ olumulo aiyipada sii: abojuto ati ọrọigbaniwọle: abojuto (as seen in Image 3.1).
5. You can now configure network settings, view connected devices, and more. It is recommended to change the default password for security.

5. Itọju

To ensure optimal performance and longevity of your Jectse M10-3 Mobile Hotspot, consider the following maintenance tips:

• Itọju Batiri: To prolong battery life, avoid extreme temperatures. Do not expose the device to direct sunlight for extended periods or to very cold environments. Charge the device regularly, but avoid overcharging.
• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta ẹ̀rọ náà. Má ṣe lo àwọn ohun ìfọṣọ omi tàbí àwọn aerosol, nítorí wọ́n lè ba àwọn ẹ̀yà ara inú jẹ́.
• Ibi ipamọ: When not in use for extended periods, store the device in a cool, dry place. It is advisable to charge the battery to about 50% before long-term storage.
• Awọn imudojuiwọn sọfitiwia: Lorekore ṣayẹwo olupese ká website or the device's web management interface for any available firmware updates to ensure optimal performance and security.

6. Laasigbotitusita

6.1. Common Connection Issues

If you are experiencing difficulty connecting to the internet, consider the following:

• SIM Card Activation/Traffic: Ensure your SIM card is activated and has an active data plan. An inactive card or one without data traffic will prevent internet access.
• Incorrect SIM Card Insertion: Verify that the SIM card is inserted correctly into the designated SIM card slot, not into a memory card slot. Refer to Section 3.1 and Image 3.1.
• Frequency Band Mismatch: The frequency band of your SIM card must match the frequency bands supported by the Jectse M10-3 router. The router supports LTE bands B1 / 3 / 7 / 8 / 20 / 28AB / 38 / 40 / 41 and UMTS bands B1 / B8. If your SIM card operates on different bands (e.g., B2, B4), it will not be able to connect to the network. Contact your mobile carrier to confirm your SIM card's frequency bands.
• Ibori Nẹtiwọọki: Ensure you are in an area with adequate 4G network coverage from your SIM card provider.
• Tun ẹrọ bẹrẹ: Try restarting the mobile hotspot and your connected device.

7. Awọn pato

8. Atilẹyin ọja ati Support

The Jectse M10-3 Mobile Hotspot comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Jectse customer service through the retailer where the product was purchased or visit the official Jectse webojula fun alaye olubasọrọ.