Barska Pursuit-200 (BE12748)

Ìwé Ìtọ́sọ́nà Olùlò Ohun èlò Ìwádìí Metal Detector Barska Winbest Pursuit-200

Model: Pursuit-200 (BE12748)

Brand: Barska

1. Ifihan

This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.

The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

  • Barska Winbest Pursuit-200 Metal Detector (Main Unit)
  • Surveyor-100 Handheld Wand Metal Detector
  • Awọn agbekọri
  • Folding Shovel with Compass
  • Ọran Gbigbe Rirọ
  • Afowoyi Olumulo (iwe-ipamọ yii)
Barska Winbest Pursuit-200 Metal Detector Field Kit components

Aworan 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.

3. Eto

3.1. Assembling the Main Metal Detector

  1. So Okun Iwadi naa: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
  2. Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
  3. Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
  4. Wrap the Cable: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
  5. Fi Awọn batiri sii: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Assembled Barska Winbest Pursuit-200 Metal Detector

Aworan 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.

3.2. Preparing the Wand Detector

The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.

Barska Surveyor-100 Handheld Wand Metal Detector

Aworan 3.2: The handheld wand metal detector, showing its compact design and control buttons.

3.3. Preparing the Folding Shovel

Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.

Barska Folding Shovel in various configurations

Aworan 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.

4. Awọn ilana Iṣiṣẹ

4.1. Main Metal Detector Operation

Barska Pursuit-200 Metal Detector LCD control panel

Aworan 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.

  1. Agbara Tan: Turn the VOLUME knob clockwise to power on the detector.
  2. Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
  3. Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
  4. Akiyesi: Use the NOTCH function to selectively eliminate specific metal categories from detection.
  5. Agbekọri: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
  6. Gbigbe: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
  7. Target Indication: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
  8. Okun wiwa ti ko ni omi: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.

4.2. Wand Detector Operation

Hand holding Barska Surveyor-100 Wand Metal Detector

Aworan 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.

  1. Agbara Tan: Press the Power ON/OFF button to activate the wand detector.
  2. Ntọkasi: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
  3. Itọkasi: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.

4.3. Shovel Usage

Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.

5. Itọju

  • Ninu: Wipe down the detector and accessories with a damp asọ lẹhin ti kọọkan lilo. Yago fun abrasive ose.
  • Ibi ipamọ: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
  • Itọju Batiri: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
  • Ayẹwo USB: Regularly check the search coil cable for any signs of wear or damage.

6. Laasigbotitusita

IsoroOwun to le FaOjutu
No power to main detector/wand detectorAwọn batiri ti o ku tabi ti ko tọRọpo awọn batiri pẹlu awọn tuntun, ni idaniloju polarity ti o pe.
Erratic signals or false positivesHigh sensitivity, electromagnetic interference, mineralized groundReduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings.
Detector not finding metalLow sensitivity, incorrect discrimination settings, search coil not parallel to groundIncrease sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly.
Ko si ohun lati olokunHeadphones not plugged in correctly, volume too low, faulty headphonesEnsure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available.

7. Awọn pato

  • Awoṣe: Pursuit-200 (BE12748)
  • Brand: Barska
  • Search Coil Size: 10 inches (Waterproof)
  • Ifihan: LCD
  • Orisun Agbara: Agbara Batiri (Awọn batiri ti a beere: Bẹẹni)
  • Gigun Adijositabulu: Yes, up to 47 inches
  • Ohun elo: Irin
  • Ìwọ̀n Nkan: Isunmọ 0.4 Kilogram (14.1 iwon)
  • Awọn iwọn ọja: 10"L x 9.5"W x 48.42"H (tí a kó jọ)
  • Iwọn Idaabobo Kariaye: IP541 (for search coil)
  • Awọn ẹya ara ẹrọ to wa: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case

8. Alaye Aabo

  • Gba igbanilaaye nigbagbogbo ṣaaju ki o to wa lori ohun-ini ikọkọ.
  • Be aware of local regulations regarding metal detecting.
  • Exercise caution when digging to avoid damaging underground utilities or historical artifacts.
  • Do not use the metal detector near live electrical wires or in hazardous environments.
  • Jeki awọn batiri kuro lati ọdọ awọn ọmọde ki o si sọ wọn nù daradara.

9. Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official Barska webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira.

Barska Official Webojula: www.barska.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.