Migro Double Pole Digital Timer Switch

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Migro Double Pole Digital Timer Switch, Model Migro2120. This programmable timer is designed for 7-day, 24-hour operation, featuring a 3-year battery backup and a weatherproof enclosure, suitable for various applications requiring precise electrical control.

2. Alaye Aabo

WARNING: Risk of Electric Shock. Installation and servicing should only be performed by qualified personnel.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the timer switch.
• Rí i dájú pé gbogbo àwọn ìsopọ̀ wáyà wà ní ààbò kí o sì tẹ̀lé àwọn òfin iná mànàmáná ti agbègbè àti ti orílẹ̀-èdè.
• Do not exceed the specified electrical ratings (Voltage, Ampigba).
• This device is designed for permanent installation.
• The weatherproof enclosure provides protection against environmental elements; however, ensure it is properly sealed after installation.

3. Package Awọn akoonu

• Migro Double Pole Digital Timer Switch (Model Migro2120)
• Apoti oju ojo
• Ohun elo iṣagbesori (awọn skru, awọn ìdákọró)
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Ọja Ipariview

Familiarize yourself with the timer's display and control buttons before operation.

Aworan 1: Iwaju view of the Migro Digital Timer Switch control panel. It features an LCD display showing time, day, and status (AUTO/ON/OFF). Below the display are several blue buttons: 'P' (Program), 'D+' (Day), 'H+' (Hour), 'M+' (Minute), 'RESET', and 'MANUAL C/R' (Manual Control/Reset). A red 'ON' indicator light is visible above the display.

4.1. Ifihan

• Ifihan akoko: Shows current time (HH:MM:SS).
• Ọjọ Osu: Indicates the current day (e.g., MO, TU, WE, TH, FR, SA, SU).
• Ipo Iṣiṣẹ: Displays "AUTO" for automatic operation, "ON" for always on, or "OFF" for always off.
• Nọmba Eto: Shows the current program being viewed tabi ṣeto.

4.2. Awọn bọtini

• P (Eto): Enters or exits programming mode. Used to cycle through program settings.
• D+ (Ọjọ́): In time setting mode, adjusts the day. In program mode, selects days for the program.
• H+ (Wákàtí): In time setting mode, adjusts the hour. In program mode, sets the hour for ON/OFF times.
• M+ (Iṣẹ́jú): In time setting mode, adjusts the minute. In program mode, sets the minute for ON/OFF times.
• Tun: Resets all settings to factory defaults. Use a pointed object (e.g., pen tip) to press.
• MANUAL C/R (Manual Control/Recall): Toggles between AUTO, ON, and OFF modes. Also used to recall programs.

5. Eto & Fifi sori

The Migro2120 timer switch is designed for 220VAC/240V 2-pole applications. Professional installation is highly recommended.

5.1. Iṣagbesori

1. Choose a suitable location for the weatherproof enclosure, ensuring it is accessible for programming and maintenance.
2. Securely mount the enclosure using the provided mounting hardware.

5.2. Awọn gbigbe

IMPORTANT: Ensure power is OFF at the main circuit breaker before proceeding with wiring.

1. Open the weatherproof enclosure and locate the terminal block for wiring.
2. Connect the incoming 220VAC/240V power lines (L1, L2) to the designated input terminals on the timer.
3. Connect the load wires (T1, T2) to the designated output terminals.
4. Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
5. Close and seal the weatherproof enclosure properly.
6. Restore power at the circuit breaker. The timer display should illuminate.

6. Awọn ilana Iṣiṣẹ

6.1. Initial Setup (Setting Current Time and Day)

1. Tẹ awọn P button once to enter time setting mode. The hour display will flash.
2. Lo awọn H+ bọtini lati ṣeto awọn ti isiyi wakati.
3. Lo awọn M+ bọtini lati ṣeto awọn ti isiyi iseju.
4. Lo awọn D+ bọtini lati ṣeto awọn ti isiyi ọjọ ti awọn ọsẹ.
5. Tẹ awọn P button again to save the settings and exit time setting mode.

6.2. Ṣíṣeto/Ṣíṣeto Awọn Eto TÍTÁN/Ṣípa

The timer supports up to 16 ON/OFF programs. Each program can be set for a specific day or combination of days.

1. Tẹ awọn P bọ́tìnì náà leralera títí tí "1 ON" yóò fi hàn lórí ìbòjú. Èyí ni ètò ON àkọ́kọ́.
2. Lo D+ to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
3. Lo H+ ati M+ láti ṣètò àkókò ON tí a fẹ́.
4. Tẹ P again. "1 OFF" will appear.
5. Lo D+ láti yan ọjọ́(àwọn) tí a fẹ́ fún ètò OFF yìí (tó sábà máa ń bá ètò ON mu).
6. Lo H+ ati M+ láti ṣètò àkókò PA tí a fẹ́.
7. Repeat steps 1-6 for additional ON/OFF programs (up to 16).
8. Lẹhin ti ṣeto gbogbo awọn eto ti o fẹ, tẹ bọtini naa ỌLỌWỌ C/R button to return to normal operating mode. Ensure "AUTO" is displayed for programmed operation.

6.3. Yiyọ Afowoyi

Awọn ỌLỌWỌ C/R button allows you to temporarily override the programmed schedule.

• Tẹ ỌLỌWỌ C/R leralera lati yipo nipasẹ awọn ipo:
• LATIO: The timer operates according to the programmed schedules.
• LATI: The connected device remains continuously ON, overriding all programs.
• PA: The connected device remains continuously OFF, overriding all programs.

7. Itọju

7.1. Afẹyinti Batiri

The timer includes a 3-year battery backup to retain settings during power outages. If the display becomes dim or settings are lost frequently, the internal battery may need replacement. This should be performed by a qualified technician.

7.2. Ninu

Fi asọ ti o rọ, d nu ita inu apo naaamp cloth. Do not use abrasive cleaners or solvents. Ensure the enclosure remains sealed to maintain its weatherproof rating.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja & Atilẹyin

Migro products are manufactured to high-quality standards. For warranty information, technical support, or to report issues, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For assistance, refer to the contact information provided with your purchase or visit the official Migro webojula.