AZZA PSAZ-1000P 80+ Platinum 1000W ATX 3.0 Power Supply User Manual

1. Ifihan

This manual provides essential information for the installation, operation, and maintenance of your AZZA PSAZ-1000P 80+ Platinum 1000W ATX 3.0 Power Supply. Please read this manual thoroughly before installation to ensure proper and safe usage of the product.

The AZZA PSAZ-1000P is a high-performance, fully modular power supply designed to meet the demands of modern computing systems, featuring 80 PLUS Platinum efficiency and ATX 3.0 compliance.

2. Alaye Aabo

• Maṣe ṣe open the power supply unit. High voltages ni o wa inu, paapaa nigba ti kuro ni unplugged.
• Fi ipese agbara sinu agbegbe ti afẹfẹ wa daradara, kuro ni awọn orisun ooru ati oorun taara.
• Rii daju pe ipese agbara ti wa ni asopọ si itanna ti ilẹ.
• Use only the modular cables provided with your AZZA PSAZ-1000P power supply. Using incompatible cables may damage the PSU or connected components.
• Before installation or maintenance, always disconnect the power cord from the wall outlet.
• Yẹra fún fífi agbára sí ọrinrin tàbí ooru tó le koko.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• AZZA PSAZ-1000P Power Supply Unit
• Modular Cable Set (including 16-pin PCIe Gen 5.0 cable)
• AC Agbara okun
• Iṣagbesori skru
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Awọn ẹya Ọja

The AZZA PSAZ-1000P power supply offers advanced features for reliable and efficient performance:

• Complies with ATX12V V3.0 standard
• Efficiency ≥ 92% at typical load (80 PLUS Platinum certified)
• Eco semi-fanless fan control switch for quiet operation at low loads
• 120mm smart hydraulic bearing (HYB) fan for optimal cooling and durability
• LLC Full Bridge Topology with DC-DC module design for stable power delivery
• Support for PCIe Gen 5.0 graphics cards with a high-quality native 16-pin cable supporting 600W output
• Complete protection features: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Temperature Protection (OTP), Under Voltage Idaabobo (UVP)
• Fully modular design for improved cable management and airflow

5. Eto ati fifi sori

Tẹle awọn igbesẹ wọnyi lati fi ipese agbara rẹ sori ẹrọ:

1. Mura Ọran PC rẹ: Ensure your PC case is compatible with ATX power supplies. Remove the side panel of your computer case.
2. Fi Ipese Agbara So: Carefully slide the AZZA PSAZ-1000P into the designated power supply bay in your PC case. Secure it with the provided mounting screws from the rear of the case.
3. So awọn okun onirin pọ: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect them to the corresponding ports on the power supply unit. Refer to the image below for port identification.

This image displays the AZZA PSAZ-1000P power supply unit from an isometric view. The modular cable connection panel is visible on the right side, labeled with 'M/B 18+10P' (Motherboard), 'CPU & PCI-E', 'SATA & MOLEX' (for storage and peripherals), and '+12VHPWR' (for high-power PCIe Gen 5.0 graphics cards) ports. The top features a fan grille, and the side shows '1000W' and 'AZZA' branding.

4. Motherboard Connection: Connect the 24-pin ATX cable (M/B 18+10P) to your motherboard.
5. Agbara Sipiyu: Connect the 4+4 pin or 8-pin EPS12V cable(s) from the 'CPU & PCI-E' ports to your motherboard's CPU power connector(s).
6. Agbára Káàdì Àwòrán: Connect the appropriate PCIe cables (6+2 pin or the 16-pin 12VHPWR cable for Gen 5.0 GPUs) from the 'CPU & PCI-E' or '+12VHPWR' ports to your graphics card(s). Ensure the 16-pin connector is fully seated if used.
7. Storage and Peripherals: Connect SATA and Molex cables from the 'SATA & MOLEX' ports to your hard drives, SSDs, optical drives, and other peripherals.
8. Iṣakoso USB: Rọ awọn okùn naa ni ọna ti o tọ lati mu afẹfẹ ati ẹwa dara si ninu apo rẹ.
9. Sopọ agbara AC: Once all internal connections are secure, connect the AC power cord to the power supply and then to a wall outlet.

6. Awọn ilana Iṣiṣẹ

After installation, ensure the power switch on the rear of the power supply is in the 'ON' position. You can then power on your computer using the case's power button.

Eco Semi-Fanless Mode

The AZZA PSAZ-1000P features an Eco semi-fanless mode, controlled by a switch on the power supply. When enabled, the fan will remain off during low to moderate loads for silent operation. The fan will automatically activate when the load increases or the internal temperature reaches a certain threshold to maintain optimal cooling. Disabling this mode will cause the fan to operate continuously, adjusting its speed based on load and temperature.

7. Itọju

Itọju to dara ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti ipese agbara rẹ:

• Yiyọ eruku kuro: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and vents. Always disconnect the power supply from the wall outlet before cleaning.
• Ayẹwo USB: Occasionally check all modular cable connections to ensure they are securely seated.
• Afẹfẹ: Ensure that the power supply's intake and exhaust vents are not obstructed, allowing for proper airflow.

8. Laasigbotitusita

Ti o ba pade awọn ọran pẹlu ipese agbara rẹ, tọka si awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:

If the problem persists after trying these steps, please contact AZZA customer support.

9. Awọn pato

10. Atilẹyin ọja ati Support

AZZA products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the official AZZA webaaye tabi kan si atilẹyin alabara wọn taara.

Fun iranlọwọ imọ-ẹrọ, laasigbotitusita kọja iwe afọwọkọ yii, tabi awọn ẹtọ atilẹyin ọja, jọwọ ṣabẹwo si AZZA official webojula tabi kan si wọn support egbe.