Vetroo AL800 Mid Tower ATX PC Computer Case

Ọrọ Iṣaaju

This manual provides detailed instructions for the assembly, operation, and maintenance of your Vetroo AL800 Mid Tower ATX PC Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Vetroo AL800 Mid Tower ATX PC Computer Case (Black)

Alaye Aabo

• Nigbagbogbo ge asopọ ipese agbara lati inu iṣan ogiri ṣaaju fifi sori ẹrọ tabi yiyọ awọn paati eyikeyi kuro.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Keep the case and components away from liquids and excessive humidity.
• Rii daju pe fentilesonu to dara lati ṣe idiwọ igbona.
• Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Vetroo AL800 Mid Tower ATX PC Computer Case
• Accessory Box (screws, standoffs, cable ties)
• Pre-installed 1x 120mm PWM/ARGB Fan (rear)
• Afowoyi Olumulo (iwe-ipamọ yii)

Key Awọn ẹya ara ẹrọ

• ARGB LED Strip: Integrated LED lighting and ARGB case fans can be synchronized with compatible motherboards via a 5V 3-pin interface.
• Door Opening Design: Features a 4mm thick tempered glass side panel with a convenient door-opening mechanism for easy access to internal components.
• High Performance Airflow: A mesh front panel and strategically placed dust filters ensure optimal airflow and system cooling.
• Ibamu gbooro: Supports ATX, M-ATX, and ITX motherboards. Accommodates GPUs up to 340mm in length and CPU coolers up to 165mm in height.
• Atilẹyin Itutu Liquid: Front panel supports up to a 360mm liquid cooling radiator.
• Atilẹyin Olufẹ: Supports up to 8 x 120mm fans.
• Itọju USB Rọrun: Includes two soft silicone cord grommets for organized cable routing.
• Powerful I/O Panel: Features 1x USB 3.2 Type-C port, 2x USB 3.0 ports, and a combined microphone/headphone jack.

Eto ati fifi sori

1. Ìmúrasílẹ̀ Gbogbogbò

• Gbe ọran naa sori alapin, dada iduroṣinṣin.
• Open the tempered glass side panel by gently pulling it open. It is hinged for easy access.
• Remove the tempered glass panel if necessary for easier installation by lifting it off its hinges once open.

Figure 2: Tempered Glass Door Opening Design

2. Modaboudu fifi sori

• Install the I/O shield (if applicable) into the rear opening of the case.
• Align your ATX, M-ATX, or ITX motherboard with the pre-installed standoffs.
• Secure the motherboard using the provided screws from the accessory box.

Figure 3: Motherboard and Component Clearance (Max CPU Cooler Height 165mm, Max GPU Length 340mm)

3. Storage Device Installation (HDD/SSD)

• Locate the dedicated mounting points for SSDs and HDDs.
• Install 2.5" SSDs onto the SSD trays or mounting brackets.
• Install 3.5" HDDs into the drive cage located at the bottom of the case.
• Secure all drives with the appropriate screws.

Figure 4: Internal Layout with Drive Bay Locations (SSD, HDD, Power Supply)

4. Fifi sori Ipese Agbara

• Mount your power supply unit (PSU) in the dedicated compartment at the bottom rear of the case.
• Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.
• Secure the PSU with screws from the rear of the case. The case supports PSUs up to 200mm in length.

5. Imugboroosi Kaadi (GPU) fifi sori

• Yọ awọn ideri iho PCI-E pataki kuro ni ẹhin apoti naa.
• Insert your graphics card or other expansion cards into the motherboard's PCI-E slots.
• Secure the cards with screws. The case supports GPUs up to 340mm in length.

6. Cooling System Installation (Fans/Radiators)

• The case comes with one pre-installed 120mm PWM/ARGB fan at the rear.
• Additional fans (120mm or 140mm) can be installed at the front, top, and bottom.
• Liquid cooling radiators up to 360mm can be installed at the front, and up to 240mm at the top.
• Refer to the diagram for supported fan and radiator configurations.

Figure 5: Fan and Liquid Radiator Support Diagram

7. Iwaju Panel Awọn isopọ

• Connect the front panel cables (Power, Reset, USB 3.0, USB Type-C, HD Audio) to the corresponding headers on your motherboard.
• Consult your motherboard manual for the exact pin layout of these headers.

Figure 6: Top I/O Panel Connections

8. ARGB and PWM Connections

• The pre-installed fan and ARGB LED strip require connection to your motherboard.
• Connect the 4-pin PWM connector from the fan to a compatible fan header on your motherboard for speed control.
• Connect the 3-pin ARGB connector from the fan and LED strip to a 5V 3-pin ARGB header on your motherboard for lighting synchronization. Ma ṣe sopọ si akọsori 12V RGB, nitori eyi yoo ba awọn LED jẹ.

Figure 7: PWM and ARGB Connector Details

9. Iṣakoso USB

• Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables.
• The soft silicone grommets help protect cables and provide a clean look.
• Ìṣàkóso okùn tó tọ́ mú kí afẹ́fẹ́ àti ẹwà rẹ̀ sunwọ̀n sí i.

Isẹ

1. Ibẹrẹ Agbara-On

• After all components are securely installed and cables connected, close the tempered glass side panel.
• Connect your monitor, keyboard, mouse, and power cable to the PC.
• Flip the power switch on your PSU to the 'ON' position.
• Press the power button on the top I/O panel of the case to start your system.

2. ARGB ina Iṣakoso

• If connected to a compatible motherboard's 5V 3-pin ARGB header, the lighting of the pre-installed fan and LED strip can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Refer to your motherboard's manual for specific instructions on using its ARGB control software.

3. Airflow Management

• The mesh front panel is designed for optimal air intake.
• Ensure that intake fans (typically front and bottom) and exhaust fans (typically rear and top) are configured to create positive or neutral air pressure for efficient cooling and dust prevention.

Figure 8: Airflow Diagram with Dust Filters

Itoju

1. Ìmọ́tótó Àlẹ̀mọ́ Eruku

• The case is equipped with dust filters on the top and bottom panels.
• Regularly check and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Gently remove the magnetic dust filters and clean them with compressed air or by rinsing with water (ensure they are completely dry before re-installation).

2. Tempered Glass Panel Care

• Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner.
• Avoid harsh chemicals or abrasive materials that could scratch or damage the glass.

Laasigbotitusita

• Eto Ko Ni Agbara:
  • Rí i dájú pé okùn agbára náà so mọ́ PSU àti ibi ìjáde ògiri dáadáa.
  • Rí i dájú pé switi PSU wà ní ipò 'ON'.
  • Ṣayẹwo pe okun bọtini agbara iwaju nronu ti sopọ mọ akọsori modaboudu.
  • Confirm all power cables (24-pin ATX, CPU, GPU) are properly seated in the motherboard and components.
• Fans Not Spinning / ARGB Not Lighting Up:
  • Check that the fan's PWM connector is securely plugged into a motherboard fan header.
  • Verify the ARGB 3-pin connector is correctly attached to a 5V 3-pin ARGB header on the motherboard (not 12V RGB).
  • Rí i dájú pé a fi sọ́fítíwọ́ọ̀kì ARGB ti modaboudu rẹ sori ẹrọ ati pe a ṣe atunto rẹ ni deede.
• Awọn ibudo USB Ko Ṣiṣẹ:
  • Confirm the USB 3.0 and USB Type-C front panel cables are correctly connected to their respective motherboard headers.
  • Check your motherboard manual for correct header locations.
• For other component-specific issues, refer to the instruction manuals for your motherboard, CPU, GPU, and other installed hardware.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, technical support, or to inquire about replacement parts, please visit the official Vetroo webojula tabi kan si wọn onibara iṣẹ taara. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Official Vetroo Store: Vetroo Amazon Store