EVTSCAN Projection Clock User Manual

1. Alaye Aabo pataki

Please read all instructions carefully before using the EVTSCAN Projection Clock. Keep this manual for future reference.

• Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, imọlẹ orun taara, tabi ọriniinitutu giga.
• Yẹra fún kíkọ sílẹ̀ tàbí fífi aago sílẹ̀ fún àwọn ìkọlù líle.
• Ma ṣe gbiyanju lati tunto tabi tun ẹrọ naa funrararẹ. Kan si oṣiṣẹ iṣẹ ti o peye.
• Use only the specified power adapter (DC 5.0V, 1.2A) or appropriate batteries (2xAAA, not included).
• Jeki kuro ni arọwọto awọn ọmọde.

2. Ọja Ipariview

The EVTSCAN Projection Clock is a versatile digital alarm clock featuring a 3-inch backlit LCD screen that displays time, date, day of the week, temperature, and humidity. It includes a projection function to display time and temperature on a wall or ceiling, dual alarms with snooze, and a USB port for charging mobile phones.

Awọn ẹya pataki:

• 12/24-hour time format display.
• Date and day of the week display (7 languages for week).
• Temperature detection (-9℃ to +50℃) and humidity detection (20% to 95%).
• Projection function with 180-degree rotation for time and temperature.
• Dual alarm clocks with slowly increasiniwọn didun g.
• 5-minute snooze function.
• USB charging port for mobile devices.
• Adjustable backlight with 4 levels (high, medium, low, off).

Nọmba 2.1: Iwaju view of the EVTSCAN Projection Clock, showing the LCD display and projection lens.

3. Package Awọn akoonu

Lẹhin ṣiṣi silẹ, jọwọ rii daju pe gbogbo awọn nkan ti o wa ni isalẹ wa ati ni ipo to dara:

• 1 x EVTSCAN Projection Clock
• 1 x Okun USB
• 1 x Afowoyi olumulo Gẹẹsi

Note: 2xAAA batteries are required for battery power and are not included in the package.

4. Eto

4.1 Agbara ẹrọ naa

The EVTSCAN Projection Clock can be powered by either AAA batteries or via the included USB cable.

4.1.1 Fifi sori batiri

1. Wa ideri iyẹwu batiri ni ẹhin aago naa.
2. Slide open the cover.
3. Fi awọn batiri AAA meji (2) sii, ni idaniloju polarity ti o pe (+/-).
4. Pa ideri batiri naa ni aabo.

Note: When powered by batteries, the backlight will only light up for 8 seconds when activated to conserve power. The projection lamp will also light up for 8 seconds.

4.1.2 USB Power Connection

1. Connect the small end of the provided USB cable to the DC 5.0V 1.2A input port on the back of the clock.
2. So opin okun USB pọ mọ adapter agbara USB ti o baamu (ko si ninu rẹ) tabi ibudo USB ti o ni agbara.

Note: When powered by USB, the backlight and projection lamp can remain continuously on, with adjustable brightness for the backlight.

Nọmba 4.1: Ẹyìn view of the clock, indicating the battery compartment and DC 5.0V 1.2A power input.

5. Awọn ilana Iṣiṣẹ

5.1 bọtini Awọn iṣẹ

Familiarize yourself with the control buttons located on the front and sides of the clock:

• Àkókò: Ó wọ ipo eto akoko.
• IKỌ: Ó wọ ipo eto itaniji.
• +: Increases values, switches 12/24HR format, adjusts backlight.
• -: Decreases values, switches temperature units (℃/℉).
• Projection ON/OFF Switch: Activates or deactivates the projection. (Located on the back/side)
• Alarm 1 ON/OFF Switch: Activates or deactivates Alarm 1. (Located on the side)
• Alarm 2 ON/OFF Switch: Activates or deactivates Alarm 2. (Located on the side)

Nọmba 5.1: Apa view showing Alarm 1 and Alarm 2 ON/OFF switches, and the USB charging port.

5.2 Eto Aago ati Ọjọ

1. Tẹ mọlẹ AKOKO button to enter time setting mode. The hour display will flash.
2. Lo awọn + or - awọn bọtini lati ṣatunṣe awọn wakati.
3. Tẹ AKOKO lẹẹkansi lati jẹrisi wakati ati gbe si eto iseju. Ṣatunṣe pẹlu + or -.
4. Tesiwaju titẹ AKOKO to cycle through setting year, month, and day. Adjust each with + or -.
5. Lẹ́yìn tí o bá ti ṣètò ọjọ́ náà, tẹ AKOKO igba to kẹhin lati jade kuro ni ipo eto.
6. Lati yipada laarin ọna kika wakati 12 ati wakati 24, tẹ bọtini naa + button during normal time display.
7. To switch between Celsius (℃) and Fahrenheit (℉) for temperature, press the - button during normal time display.

5.3 Eto Awọn itaniji

The clock features two independent alarms (Alarm 1 and Alarm 2).

1. Tẹ mọlẹ Itaniji button to enter Alarm 1 setting mode. The Alarm 1 hour display will flash.
2. Lo awọn + or - awọn bọtini lati ṣatunṣe aago itaniji.
3. Tẹ Itaniji again to confirm the hour and move to Alarm 1 minute setting. Adjust with + or -.
4. Tẹ Itaniji again to move to Alarm 2 hour setting, and repeat the process for Alarm 2.
5. After setting Alarm 2 minutes, press Itaniji igba to kẹhin lati jade kuro ni ipo eto.
6. To activate or deactivate an alarm, use the corresponding Itaniji 1 TAN/PA or Itaniji 2 TAN/PA switch on the side of the clock. An alarm icon will appear on the display when active.

5.3.1 Iṣiṣẹ Snooze

When an alarm sounds, press any button (except the alarm ON/OFF switch) to activate the 5-minute snooze function. The alarm will sound again after 5 minutes. To turn off the alarm completely, slide the corresponding alarm ON/OFF switch to OFF.

5.4 Iṣẹ́ Àyẹ̀wò

The clock can project the time and temperature onto a wall or ceiling.

1. Wa awọn Asọtẹlẹ ON/PA switch on the back of the clock. Slide it to ON to activate the projection.
2. Adjust the angle of the projection arm (the part with the lens) to direct the projection as desired. The arm can rotate nearly 180 degrees.
3. The projection will display the current time and temperature in a soft red color.

Nọmba 5.2: Apa view showing the projection arm extended and ready for use.

Nọmba 5.3: The clock projecting time and temperature onto a wall in a bedroom setting.

5.5 Backlight Atunṣe

When the clock is powered by USB, the backlight can be adjusted to four levels: high, medium, low, or off. Repeatedly press the + button during normal time display to cycle through the brightness levels.

When powered by batteries, the backlight will illuminate for 8 seconds when any button is pressed, then turn off to conserve power.

5.6 Okun gbigba agbara USB

The clock features a USB charging port (5V=1A) on its side. You can use this port to charge your mobile phone or other small electronic devices while the clock is connected to USB power.

Note: The USB charging port only functions when the clock is powered via the USB cable. It does not work when the clock is running on battery power.

6. Itọju

6.1 Ninu

• Fi aṣọ rírọrùn tí ó gbẹ nu ojú aago náà.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Keep the projection lens clean for clear projection. Use a soft, lint-free cloth.

6.2 Batiri Rirọpo

When the display becomes dim or the clock functions erratically while on battery power, it's time to replace the AAA batteries. Refer to Section 4.1.1 for battery installation instructions. Always replace both batteries at the same time with new ones.

7. Laasigbotitusita

8. Awọn pato

Nọmba 8.1: Product dimensions: 5.3 inches wide by 3.1 inches high.

9. Atilẹyin ọja ati Support

EVTSCAN products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your retailer.

If you encounter any issues or have questions regarding your EVTSCAN Projection Clock, please contact the seller or EVTSCAN customer support for assistance. Please have your model number (B0CLGDFCGX) ready when contacting support.

Fun iranlọwọ siwaju sii, o le ṣabẹwo si EVTSCAN Store on Amazon.