RecPro RV Speaker Switch 3-Position Control Panel User Manual

Ọrọ Iṣaaju

Thank you for choosing the RecPro RV Speaker Switch 3-Position Control Panel. This manual provides essential information for the proper installation, operation, and maintenance of your speaker switch. This device allows you to easily switch between interior and exterior speakers, or play audio through both simultaneously, enhancing your RV audio experience. Its low-profile black design integrates seamlessly with most RV interiors.

Ohun ti o wa ninu Apoti

• RecPro RV Speaker Switch (Model: RP-1802)

Ọja Pariview

The RecPro RV Speaker Switch features a simple, intuitive design for controlling your RV's audio output.

olusin 1: Iwaju view of the RecPro RV Speaker Switch, showing the labeled twist knob for speaker selection.

The front panel includes a single twist knob with three clearly marked positions:

• NI: Directs audio to the interior speakers only.
• Mejeeji: Directs audio to both interior and exterior speakers simultaneously.
• Jade: Directs audio to the exterior speakers only.

Figure 2: The speaker switch highlighting its easy-to-use design and ability to control interior, exterior, or both speaker zones.

Fifi sori ẹrọ

Iṣagbesori Yipada

The RecPro RV Speaker Switch is designed for flush mounting. Ensure you have adequate space behind the mounting surface for wiring connections.

• Choose a suitable location in your RV, typically near your audio head unit.
• Refer to the dimensions below to create a rough opening for the switch.
• Insert the switch into the opening and secure it using appropriate fasteners (not included) through the mounting holes on the faceplate.

Figure 3: Detailed measurements for the RecPro RV Speaker Switch, including the rough opening dimensions for installation.

Awọn Itọsọna Waya

The speaker switch connects to your audio head unit and both sets of speakers (interior and exterior). It uses screw terminals for secure connections. Pataki: Disconnect all power to your audio system before beginning installation to prevent electrical shock or damage to components.

olusin 4: Ẹyìn view of the speaker switch, showing the pre-attached wiring harness for connection.

Refer to the wiring diagram below for correct connections. Each wire is color-coded and labeled for clarity.

Figure 5: Comprehensive wiring diagram for the RecPro RV Speaker Switch (Model RP-1802), illustrating connections for radio and both interior and exterior speakers.

1. Identify Speaker Wires: Your RV's audio system will have positive (+) and negative (-) wires for each speaker channel (Left and Right, Interior and Exterior).
2. Connect Radio Output:
   • Sopọ awọn Orange (RADIO L+) wire from the switch to your radio's Left Positive (+) output.
   • Sopọ awọn Black (RADIO L-) wire from the switch to your radio's Left Negative (-) output.
   • Sopọ awọn Blue (RADIO R+) wire from the switch to your radio's Right Positive (+) output.
   • Sopọ awọn Gray (RADIO R-) wire from the switch to your radio's Right Negative (-) output.
3. Connect Interior Speakers:
   • Sopọ awọn Green (INSIDE L+) wire from the switch to your interior Left Positive (+) speaker wire.
   • Sopọ awọn White (INSIDE L-) wire from the switch to your interior Left Negative (-) speaker wire.
   • Sopọ awọn Yellow (INSIDE R+) wire from the switch to your interior Right Positive (+) speaker wire.
   • Sopọ awọn Red (INSIDE R-) wire from the switch to your interior Right Negative (-) speaker wire.
4. Connect Exterior Speakers:
   • Sopọ awọn Light Blue (OUTSIDE L+) wire from the switch to your exterior Left Positive (+) speaker wire.
   • Sopọ awọn Teal (OUTSIDE L-) wire from the switch to your exterior Left Negative (-) speaker wire.
   • Sopọ awọn Pink (OUTSIDE R+) wire from the switch to your exterior Right Positive (+) speaker wire.
   • Sopọ awọn Brown (OUTSIDE R-) wire from the switch to your exterior Right Negative (-) speaker wire.
5. Awọn isopọ to ni aabo: Ensure all connections are tight and properly insulated to prevent short circuits.
6. Pada Agbara pada: Once all connections are verified, restore power to your audio system.

Awọn ilana Iṣiṣẹ

Using the RecPro RV Speaker Switch is straightforward. Simply turn the knob to select your desired audio output.

• IN Position: Rotate the knob to "IN" to play audio exclusively through your RV's interior speakers.
• BOTH Position: Rotate the knob to "BOTH" to play audio through both your interior and exterior speakers simultaneously.
• OUT Position: Rotate the knob to "OUT" to play audio exclusively through your RV's exterior speakers.

Adjust the volume using your RV's main audio head unit. The speaker switch does not control volume.

Itoju

The RecPro RV Speaker Switch requires minimal maintenance.

• Jẹ́ kí ẹ̀rọ náà mọ́ nípa fífi aṣọ gbígbẹ tó rọ̀, tó sì gbẹ nu ún. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Periodically check wiring connections to ensure they remain secure, especially after long periods of travel or vibration.
• Ensure no moisture or liquids come into contact with the internal components.

Laasigbotitusita

Awọn pato

Alaye atilẹyin ọja

For specific warranty details regarding your RecPro RV Speaker Switch, please refer to the warranty documentation included with your purchase or visit the official RecPro webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Onibara Support

If you have any questions, require technical assistance, or need to report an issue with your RecPro RV Speaker Switch, please contact RecPro customer support.

You can typically find contact information on the official RecPro webojula: RecPro Store on Amazon.